<?xml version="1.0"?>
|
<doc>
|
<assembly>
|
<name>Microsoft.Practices.EnterpriseLibrary.Common</name>
|
</assembly>
|
<members>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AppDomainNameFormatter">
|
<summary>
|
Provides the friendly name of the application domain as the prefix in formatting a
|
particular instance of a performance counter.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.IPerformanceCounterNameFormatter">
|
<summary>
|
Provides a pluggable way to format the name given to a particular instance of a performance counter.
|
Each instance of a performance counter in Enterprise Library is given a name of the format
|
"Name prefix - counter name"
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.IPerformanceCounterNameFormatter.CreateName(System.String)">
|
<summary>
|
Creates the formatted instance name for a performance counter, providing the prefix for the
|
instance.
|
</summary>
|
<param name="nameSuffix">Performance counter name, as defined during installation of the counter</param>
|
<returns>Formatted instance name in form of "prefix - nameSuffix"</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AppDomainNameFormatter.#ctor">
|
<summary>
|
Creates an instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AppDomainNameFormatter"/>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AppDomainNameFormatter.#ctor(System.String)">
|
<summary>
|
Creates an instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AppDomainNameFormatter"/> with an Application Instance Name
|
</summary>
|
<param name="applicationInstanceName"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AppDomainNameFormatter.CreateName(System.String)">
|
<summary>
|
Creates the formatted instance name for a performance counter, providing the Application
|
Domain friendly name for the prefix for the instance.
|
</summary>
|
<param name="nameSuffix">Performance counter name, as defined during installation of the counter</param>
|
<returns>Formatted instance name in form of "appDomainFriendlyName - nameSuffix"</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter">
|
<summary>
|
Provides a virtual PerformanceCounter interface that allows an application to maintain both individually
|
named counter instances and a single counter total instance.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.#ctor(System.String,System.String)">
|
<summary>
|
Initializes a single performance counter instance named "Total"
|
</summary>
|
<param name="counterCategoryName">Performance counter category name, as defined during installation</param>
|
<param name="counterName">Performance counter name, as defined during installation</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.#ctor(System.String,System.String,System.String[])">
|
<summary>
|
Initializes multiple instances of performance counters to be managed by this object.
|
</summary>
|
<param name="counterCategoryName">Performance counter category name, as defined during installation</param>
|
<param name="counterName">Performance counter name, as defined during installation</param>
|
<param name="instanceNames">Param array of instance names to be managed</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.#ctor(System.Diagnostics.PerformanceCounter[])">
|
<summary>
|
Initializes this object with performance counters created externally. It is the responsibility of the external
|
counter factory to create an instance for the "Total" counter.
|
</summary>
|
<param name="counters">Param array of already initialized <see cref="T:System.Diagnostics.PerformanceCounter"></see>s to be managed
|
by this instance.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.Clear">
|
<summary>
|
Clears the raw count associated with all managed performance counters
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.Increment">
|
<summary>
|
Increments each performance counter managed by this instance.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.IncrementBy(System.Int64)">
|
<summary>
|
Increments by the given <paramref name="value"></paramref> each performance counter managed by this instance.
|
</summary>
|
<param name="value">Amount by which to increment each counter</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.GetValueFor(System.String)">
|
<summary>
|
Gets the current value of the given performance counter instance.
|
</summary>
|
<param name="instanceName">Instance name of counter for which to get value.</param>
|
<returns>Value of the given performance counter.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.SetValueFor(System.String,System.Int64)">
|
<summary>
|
Sets the value of the given performance counter instance.
|
</summary>
|
<param name="instanceName">Instance name of counter for which to set the value.</param>
|
<param name="value">Value to which the given instance should be set.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.InstantiateCounter(System.String)">
|
<summary>
|
Initializes a performance counter, giving it the specified <paramref name="instanceName"></paramref>.
|
</summary>
|
<param name="instanceName">Instance name to be given to the instantiated <see cref="T:System.Diagnostics.PerformanceCounter"></see></param>.
|
<returns>Initialized <see cref="T:System.Diagnostics.PerformanceCounter"></see></returns>.
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.Increment(System.String)">
|
<summary>
|
Increments the associated performance counters by one.
|
</summary>
|
<param name="instanceName">The instance to be incremented.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.Counters">
|
<summary>
|
Gets the list of performance counter instances managed by this object.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter.Value">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventBinder">
|
<summary>
|
Binds an event source to an event handler.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventBinder.#ctor(System.Object,System.Object)">
|
<summary>
|
Initializes this object with the source and listener objects to be bound together.
|
</summary>
|
<param name="source">Object owning the event that will be bound to</param>
|
<param name="listener">Object owning the method that will be added as a handler for specified event.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventBinder.Bind(System.Reflection.EventInfo,System.Reflection.MethodInfo)">
|
<summary>
|
Adds specified <paramref name="listenerMethod"></paramref> as an event handler for
|
the <paramref name="sourceEvent"></paramref>.
|
</summary>
|
<param name="sourceEvent">Event on source object to which <paramref name="listenerMethod"></paramref> will be added.</param>
|
<param name="listenerMethod">Method to be added as event handler for <paramref name="listenerMethod"></paramref>.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationBaseAttribute">
|
<summary>
|
Base class for attributes used to identify instrumentation producers or consumers.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationBaseAttribute.#ctor(System.String)">
|
<summary>
|
Initializes this instance with the instrumentation subject name.
|
</summary>
|
<param name="subjectName">Subject name being produced or consumed</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationBaseAttribute.SubjectName">
|
<summary>
|
Gets the subject name
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationConsumerAttribute">
|
<summary>
|
Defines methods that are consuming instrumentation events.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationConsumerAttribute.#ctor(System.String)">
|
<summary>
|
Initializes this instance with the instrumentation subject name being consumed.
|
</summary>
|
<param name="subjectName">Subject name of the event being consumed.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListenerAttribute">
|
<summary>
|
Defines a class that will listen for instrumentation events broadcast by other classes
|
and report them to system services. This attribute is placed on the class that is to be
|
listened to, in order to define the class that will listen to it.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListenerAttribute.#ctor(System.Type)">
|
<overloads>
|
Initializes attribute with given <paramref name="listenerType"></paramref>.
|
</overloads>
|
<summary>
|
Initializes attribute with given <paramref name="listenerType"></paramref>.
|
</summary>
|
<param name="listenerType">Instrumentation listener type to instantiate.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListenerAttribute.#ctor(System.Type,System.Type)">
|
<summary>
|
Initializes attribute with given <paramref name="listenerType"></paramref>. Use when
|
you need to specify an explicit binder class.
|
</summary>
|
<param name="listenerType">Instrumentation listener type to instantiate.</param>
|
<param name="listenerBinderType">Instrumentation binder listener type to instantiate.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListenerAttribute.ListenerType">
|
<summary>
|
Gets type of class to instantiate to listen for events.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListenerAttribute.ListenerBinderType">
|
<summary>
|
Gets type of class to use to bind an instance of the attributed class to
|
an instance of the listener class
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationProviderAttribute">
|
<summary>
|
Defines events that are producing instrumentation events.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationProviderAttribute.#ctor(System.String)">
|
<summary>
|
Initializes this object with the instrumentation subject name being produced.
|
</summary>
|
<param name="subjectName">Subect name of event being produced.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.HasInstallableResourcesAttribute">
|
<summary>
|
Defines those classes and structs that have some sort of resources that need to be installed.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterAttribute">
|
<summary>
|
Defines a <see cref="T:System.Diagnostics.PerformanceCounter"></see>. Used by the reflection-based installers to
|
prepare a performance counter for installation.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterAttribute.#ctor(System.String,System.String,System.Diagnostics.PerformanceCounterType)">
|
<summary>
|
Initializes this object with all data needed to install a <see cref="T:System.Diagnostics.PerformanceCounter"></see>.
|
</summary>
|
<param name="counterName">Performance counter name.</param>
|
<param name="counterHelp">Name of Help resource string. This is not the help text itself,
|
but is the resource name used to look up the internationalized help text at install-time.</param>
|
<param name="counterType">Performance Counter type.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterAttribute.HasBaseCounter">
|
<summary>
|
Used to determine if the counter being installed has a base counter associated with it.
|
</summary>
|
<returns>True if counter being installed has a base counter associated with it.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterAttribute.CounterType">
|
<summary>
|
Gets the <see cref="T:System.Diagnostics.PerformanceCounter"></see> type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterAttribute.CounterHelp">
|
<summary>
|
Get the name of Help resource string. This is not the help text itself,
|
but is the resource name used to look up the internationalized help text at install-time.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterAttribute.CounterName">
|
<summary>
|
Gets the <see cref="T:System.Diagnostics.PerformanceCounter"></see> name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterAttribute.BaseCounterType">
|
<summary>
|
Gets and sets the base <see cref="T:System.Diagnostics.PerformanceCounter"></see> type. This is an optional
|
property used when the counter being defined requires a base counter to operate, such as for
|
averages.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterAttribute.BaseCounterHelp">
|
<summary>
|
Gets and sets the base <see cref="T:System.Diagnostics.PerformanceCounter"></see> help resource name.
|
This is not the help text itself,
|
but is the resource name used to look up the internationalized help text at install-time.
|
This is an optional
|
property used when the counter being defined requires a base counter to operate, such as for
|
averages.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterAttribute.BaseCounterName">
|
<summary>
|
Gets and sets the base <see cref="T:System.Diagnostics.PerformanceCounter"></see> name. This is an optional
|
property used when the counter being defined requires a base counter to operate, such as for
|
averages.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.NoPrefixNameFormatter">
|
<summary>
|
Provides a pluggable way to format the name given to a particular instance of a performance counter.
|
This class does no formatting, returning the provided name suffix as the counter name.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.NoPrefixNameFormatter.CreateName(System.String)">
|
<summary>
|
Returns the given <paramref name="nameSuffix"></paramref> as the created name.
|
</summary>
|
<param name="nameSuffix">Performance counter name, as defined during installation of the counter</param>
|
<returns>Formatted instance name in form of "nameSuffix"</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources">
|
<summary>
|
A strongly-typed resource class, for looking up localized strings, etc.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ResourceManager">
|
<summary>
|
Returns the cached ResourceManager instance used by this class.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.Culture">
|
<summary>
|
Overrides the current thread's CurrentUICulture property for all
|
resource lookups using this strongly typed resource class.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.CannotCreateDesignSource">
|
<summary>
|
Looks up a localized string similar to Cannot create design source for rootSource other than DesignConfigurationSource..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ConfigurationSourceInvalidTypeErrorMessage">
|
<summary>
|
Looks up a localized string similar to The type '{0}' defined in the '{1}' configuration source is invalid.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.EventLogEntryExceptionTemplate">
|
<summary>
|
Looks up a localized string similar to The exception that occured was: {0}.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.EventLogEntryHeaderTemplate">
|
<summary>
|
Looks up a localized string similar to An error occurred in application {0} in the {1}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionArgumentShouldDeriveFromIDictionary">
|
<summary>
|
Looks up a localized string similar to The type '{0}' does not derive from IDictionary..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionArgumentShouldDeriveFromIList">
|
<summary>
|
Looks up a localized string similar to The type '{0}' does not derive from IList..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionAssemblerAttributeNotSet">
|
<summary>
|
Looks up a localized string similar to The [Assembler] attribute is not set in the configuration object type {0}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionAssemblerTypeNotCompatible">
|
<summary>
|
Looks up a localized string similar to The assembler configured for type {0} has type {2} which is not compatible with type {1}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionBaseConfigurationSourceElementIsInvalid">
|
<summary>
|
Looks up a localized string similar to The base ConfigurationSourceElement configuration type can not be used as a concrete configuration element..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionCannotAddParametersAfterDispose">
|
<summary>
|
Looks up a localized string similar to Cannot add new paramters after Finish() or Dispose()..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionCanNotConvertType">
|
<summary>
|
Looks up a localized string similar to The AssemblyQualifiedTypeNameConverter can only convert values of type '{0}'..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionCannotFinish">
|
<summary>
|
Looks up a localized string similar to Builder has already added policies..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionConfigurationFileNotFound">
|
<summary>
|
Looks up a localized string similar to The section {0} could not be saved because the file does not exist..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionConfigurationLoadFileNotFound">
|
<summary>
|
Looks up a localized string similar to The configuration file {0} could not be found..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionConfigurationObjectIsNotCustomProviderData">
|
<summary>
|
Looks up a localized string similar to The configuration object for type '{0}' with name '{1}' has type '{2}' which is does not implement ICustomProviderData..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionConfigurationObjectWithTypeDoesNotHaveTypeSet">
|
<summary>
|
Looks up a localized string similar to The concrete type for polymorphic object named '{1}' in hierarchy {2} is not defined in configuration object {0}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionConfigurationSectionPointsToNonExistingSource">
|
<summary>
|
Looks up a localized string similar to The configuration section '{0}' specifies Source '{1}', which is not declared in the configuration sources section..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionConfigurationSourceNotFound">
|
<summary>
|
Looks up a localized string similar to A configuration source named '{0}' was not found in the {1} section..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionConfigurationSourceSectionNotFound">
|
<summary>
|
Looks up a localized string similar to The configuration source section is not found in the application configuration file..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionContainerPolicyCreatorAttributeNotPresent">
|
<summary>
|
Looks up a localized string similar to The required "ContainerPolicyCreatorAttribute" is not present in the supplied type "{0}"..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionCustomFactoryAttributeNotFound">
|
<summary>
|
Looks up a localized string similar to The [CustomFactory] attribute was not found on type {0} while processing request for id '{1}'..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionCustomProviderTypeDoesNotHaveTheRequiredConstructor">
|
<summary>
|
Looks up a localized string similar to Type '{0}' specified as a custom provider does not have the required public constructor with a single NameValueCollection parameter..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionEventRaisingFailed">
|
<summary>
|
Looks up a localized string similar to There was an error raising an event in .
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionFactoryMethodHasInvalidReturnType">
|
<summary>
|
Looks up a localized string similar to The method with signature {0} is not a valid factory method to build type {1}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionIncompaitbleMergeElementType">
|
<summary>
|
Looks up a localized string similar to Cannot merge the configuration element.
|
The local elements type '{0}' is incompatible with the parent elements type '{1}'..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionInvalidType">
|
<summary>
|
Looks up a localized string similar to The type '{0}' cannot be resolved. Please verify the spelling is correct or that the full type name is provided..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionMustBeNameTypeConfigurationElement">
|
<summary>
|
Looks up a localized string similar to The supplied configuration object has type '{0}', which is not a descendant of 'NameTypeConfigurationElement' as required..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionMustHaveNoArgsConstructor">
|
<summary>
|
Looks up a localized string similar to The required zero argument constructor is not available for the supplied type "{0}"..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionMustImplementIContainerPolicyCreator">
|
<summary>
|
Looks up a localized string similar to The required interface "IContainerPolicyCreator" is not implemented by the supplied type "{0}"..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionNamedConfigurationNotFound">
|
<summary>
|
Looks up a localized string similar to The configuration could not be found for name '{0}' in factory {1}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionNoConfigurationElementAttribute">
|
<summary>
|
Looks up a localized string similar to The type {0} does not contain the ConfigurationElementTypeAttribute..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionNoConfigurationObjectPolicySet">
|
<summary>
|
Looks up a localized string similar to No policy specifying the configuration source for the container has been set. The EnterpriseLibraryCoreExtension is probably missing..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionNoMatchingConstructorFound">
|
<summary>
|
Looks up a localized string similar to No public constructor with {1} arguments was found for type "{0}"..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionNoMethodAnnotatedForInjectionFound">
|
<summary>
|
Looks up a localized string similar to The type {0} does not have a public method annotated as an injection target as required by the use of injection..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionNoSuitableFactoryMethodFound">
|
<summary>
|
Looks up a localized string similar to The type {0} does not have a static method with a TargetConstructorAttribuite suitable to create an object of type {1}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionNoTypeAttribute">
|
<summary>
|
Looks up a localized string similar to The type attribute does not exist on the element {0}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionParameterNotAnnotatedForInjection">
|
<summary>
|
Looks up a localized string similar to The parameter '{0}' for injection target '{1}' in type '{2}' is missing the injection interpretation attribute..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionPerformanceCounterRedefined">
|
<summary>
|
Looks up a localized string similar to The performance counter '{0}' in category '{1}' is redefined in type {2} with a different configuration..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionPolicyBuilderFinished">
|
<summary>
|
Looks up a localized string similar to Attempt to continue working with a PolicyBuilder after the policies have been added to a policy list for type '{1}' with key '{0}'..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionPolicyBuilderStillWaitingForPropertyPolicy">
|
<summary>
|
Looks up a localized string similar to The specified policies cannot be added: a property policy mapping is still taking place..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionPropertyAccessExpressionNotPropertyAccess">
|
<summary>
|
Looks up a localized string similar to The supplied expression is not a valid property access expression: '{0}'..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionPropertyNotFound">
|
<summary>
|
Looks up a localized string similar to e {2}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionRedirectedConfigurationSectionNotFound">
|
<summary>
|
Looks up a localized string similar to Unable to find the redirected section {0} in the specified configuration source {1}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionRegistrationServiceTypeIsNotCompatible">
|
<summary>
|
Looks up a localized string similar to Service type of {0} is not compatible with supplied expression type of {1}.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionRegistrationTypeExpressionMustBeNewLambda">
|
<summary>
|
Looks up a localized string similar to Lambda expression must construct a new instance of a type..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionRetrievalAttributeNotFound">
|
<summary>
|
Looks up a localized string similar to The type {0} does not contain the ConfigurationDataRetrievalAttribute required to resolve named references..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionShouldBeImplementedBySubclass">
|
<summary>
|
Looks up a localized string similar to Method must be overriden by subclass..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionSourcePropertyDoesNotExist">
|
<summary>
|
Looks up a localized string similar to Could not retrieve parameter value. The property {0} does not exist for type {1}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionStringNullOrEmpty">
|
<summary>
|
Looks up a localized string similar to The value can not be null or string or empty..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionSuppliedCreationExpressionIsNotNewExpression">
|
<summary>
|
Looks up a localized string similar to A creation expression must be a constructor call, but the supplied expression was '{0}'..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionSystemSourceNotDefined">
|
<summary>
|
Looks up a localized string similar to The system configuration source is not defined in the configuration file..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionTheSpecifiedDefaultProviderDoesNotExistInConfiguration">
|
<summary>
|
Looks up a localized string similar to The configuration object for default provider named '{0}' for type '{1}' was not found in the supplied list..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionTypeCouldNotBeCreated">
|
<summary>
|
Looks up a localized string similar to The type {0} from configuration could not be created..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionTypeDoesNotProvideCorrectConstructor">
|
<summary>
|
Looks up a localized string similar to Type does not provide a constructor taking a single parameter type of NameValueCollection.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionTypeMustDeriveFromType">
|
<summary>
|
Looks up a localized string similar to Type must be derived from '{0}'..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionTypeMustImplementInterface">
|
<summary>
|
Looks up a localized string similar to Type must implement interface '{0}'..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionTypeNotCustomFactory">
|
<summary>
|
Looks up a localized string similar to Type {0} is not an implementation of ICustomFactory for CustomFactoryAttribute..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionTypeNotNameMapper">
|
<summary>
|
Looks up a localized string similar to Type {0} is not an implementation of IConfigurationNameMapper for ConfigurationNameMapperAttribute..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionTypeNotRetriever">
|
<summary>
|
Looks up a localized string similar to Type {0} is not an implementation of IConfigurationDataRetriever for ConfigurationDataRetrievalAttribute..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionUnableToMatchConstructorToConfigurationObject">
|
<summary>
|
Looks up a localized string similar to Default policy creation failed: The properties in the supplied configuration object of type {0} cannot be matched to any constructor on type {1}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionUnexpectedType">
|
<summary>
|
Looks up a localized string similar to The expected type '{0}' was not provided..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionUnknownResolveMethod">
|
<summary>
|
Looks up a localized string similar to An call to an unknown method named '{0}' in the Resolve class was found in the supplied argument expression: '{1}'. Cannot create policies for this expression..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionUnrecognizedContainerMarkerMethod">
|
<summary>
|
Looks up a localized string similar to Unrecognized Container marker method..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionUnrecognizedDependencyParameterType">
|
<summary>
|
Looks up a localized string similar to Unrecognized DependencyParameter type: {0}.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.ExceptionUnsupportedBindingExpressionType">
|
<summary>
|
Looks up a localized string similar to The initialization expression for property {0} is not supported: only simple bindings are supported..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.FileConfigurationSourceName">
|
<summary>
|
Looks up a localized string similar to File Configuration Source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Properties.Resources.SystemConfigurationSourceName">
|
<summary>
|
Looks up a localized string similar to System Configuration Source.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CallHandlerData">
|
<summary>
|
Base class for configuration information stored about a call handler.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement">
|
<summary>
|
Represents a <see cref="T:System.Configuration.ConfigurationElement"/> that has a name and type.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement">
|
<summary>
|
Represents a named <see cref="T:System.Configuration.ConfigurationElement"/> where the name is the key to a collection.
|
</summary>
|
<remarks>
|
This class is used in conjunction with a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1"/>.
|
</remarks>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IObjectWithName">
|
<summary>
|
Represents the abstraction of an object with a name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IObjectWithName.Name">
|
<summary>
|
Gets the name.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement.nameProperty">
|
<summary>
|
Name of the property that holds the name of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement.#ctor">
|
<summary>
|
Initialize a new instance of a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement.#ctor(System.String)">
|
<summary>
|
Intialize a new instance of a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/> class with a name.
|
</summary>
|
<param name="name">The name of the element.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement.DeserializeElement(System.Xml.XmlReader)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Updates the configuration properties of the receiver with the information in the current element in the <paramref name="reader"/>.
|
</summary>
|
<param name="reader">The reader over the configuration file.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement.Name">
|
<summary>
|
Gets or sets the name of the element.
|
</summary>
|
<value>
|
The name of the element.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IObjectWithNameAndType">
|
<summary>
|
Represents the abstraction of an object with a name and a type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IObjectWithNameAndType.Type">
|
<summary>
|
Gets the type.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.typeProperty">
|
<summary>
|
Name of the property that holds the type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.#ctor">
|
<summary>
|
Intialzie an instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.#ctor(System.String,System.Type)">
|
<summary>
|
Initialize an instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/> class
|
</summary>
|
<param name="name">The name of the element.</param>
|
<param name="type">The <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.Type"/> that this element is the configuration for.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.Type">
|
<summary>
|
Gets or sets the <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.Type"/> the element is the configuration for.
|
</summary>
|
<value>
|
The <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.Type"/> the element is the configuration for.
|
</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.TypeName">
|
<summary>
|
Gets or sets the fully qualified name of the <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.Type"/> the element is the configuration for.
|
</summary>
|
<value>
|
the fully qualified name of the <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement.Type"/> the element is the configuration for.
|
</value>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CallHandlerData.#ctor">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CallHandlerData"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CallHandlerData.#ctor(System.String,System.Type)">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CallHandlerData"/>.
|
</summary>
|
<param name="handlerName">Name of handler entry.</param>
|
<param name="handlerType">Type of handler to create.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CallHandlerData.#ctor(System.String,System.Type,System.Int32)">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CallHandlerData"/>.
|
</summary>
|
<param name="handlerName">Name of handler entry.</param>
|
<param name="handlerType">Type of handler to create.</param>
|
<param name="order">The order of the handler.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CallHandlerData.GetRegistrations(System.String)">
|
<summary>
|
Get the set of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to
|
register the call handler represented by this config element and its associated objects.
|
</summary>
|
<param name="nameSuffix">A suffix for the names in the generated type registration objects.</param>
|
<returns>The set of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CallHandlerData.Order">
|
<summary>
|
Gets or sets the Order in which the call handler will be executed
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSectionCloner">
|
<summary>
|
Clones a <see cref="T:System.Configuration.ConfigurationSection"/>.
|
</summary>
|
<remarks>
|
This will perform a clone of a <see cref="T:System.Configuration.ConfigurationSection"/> by evaluating each element in
|
the <see cref="P:System.Configuration.ElementInformation.Properties"/>. If these properties are themselves <see cref="T:System.Configuration.ConfigurationElement"/> they will
|
be cloned as well.
|
|
As <see cref="T:System.Configuration.ConfigurationElementCollection"/> items do not expose the ability to add and remove, any configuration collections
|
must implement <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection"/> to be cloned. If they do not implement this, they will be skipped
|
during cloning. The enterprise library collections implement this interface and the cloner will properly handle the cloning
|
of <see cref="T:System.Configuration.ConnectionStringSettingsCollection"/> and <see cref="T:System.Configuration.KeyValueConfigurationCollection"/> with an internal wrapper that
|
implements <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection"/> for these collections.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSectionCloner.Clone(System.Configuration.ConfigurationSection)">
|
<summary>
|
Clones a <see cref="T:System.Configuration.ConfigurationSection"/>
|
</summary>
|
<param name="section">The <see cref="T:System.Configuration.ConfigurationSection"/> to clone.</param>
|
<returns>A new, cloned <see cref="T:System.Configuration.ConfigurationSection"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSectionCloner.CloneElement(System.Configuration.ConfigurationElement,System.Configuration.ConfigurationElement)">
|
<summary>
|
|
</summary>
|
<param name="sourceElement"></param>
|
<param name="targetElement"></param>
|
<returns></returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler">
|
<summary>
|
Implements common behavior for classes that add extended functionality to <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> implementations.<br/>
|
This class can create subordinate sources based on the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection"/> configuration and propagates change events
|
From these sources to the main source.
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler"/>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler"/> passing the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> implementation
|
That contains the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection"/> configuration.
|
</summary>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> implementation that should be extended.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.CheckGetSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Checks whether a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.GetSection(System.String)"/> should be extended.<br/>
|
If the call should be extended performs the extended behavior and returns the modified <see cref="T:System.Configuration.ConfigurationSection"/> intance.<br/>
|
If the call should not be extended returns <paramref name="configurationSection"/>.
|
</summary>
|
<param name="sectionName">The name of the section that was retrieved from configuration.</param>
|
<param name="configurationSection">The section that was retrieved from configuration.</param>
|
<returns>The resulting <see cref="T:System.Configuration.ConfigurationSection"/> instance.</returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.GetSection(System.String)"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.DoCheckGetSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
When overridden in a derived class, checks whether a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.GetSection(System.String)"/> should be extended.<br/>
|
If the call should be extended performs the extended behavior and returns the modified <see cref="T:System.Configuration.ConfigurationSection"/> intance.<br/>
|
If the call should not be extended returns <paramref name="configurationSection"/>.
|
</summary>
|
<param name="sectionName">The name of the section that was retrieved from configuration.</param>
|
<param name="configurationSection">The section that was retrieved from configuration.</param>
|
<returns>The <see cref="T:System.Configuration.ConfigurationSection"/> instance passed as <paramref name="configurationSection"/>.</returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.GetSection(System.String)"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.CheckAddSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Checks whether a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)"/> should be extended.<br/>
|
If the call should be extended performs the extended behavior.
|
</summary>
|
<param name="sectionName">The name of the section that should be stored in configuration.</param>
|
<param name="configurationSection">The section that should be stored in configuration.</param>
|
<returns><see langword="true"/> if the call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)"/> was handled by the extension.</returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.DoCheckAddSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
When overridden in a derived class, checks whether a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)"/> should be extended.<br/>
|
If the call should be extended performs the extended behavior.
|
</summary>
|
<param name="sectionName">The name of the section that should be stored in configuration.</param>
|
<param name="configurationSection">The section that should be stored in configuration.</param>
|
<returns><see langword="false"/></returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.CheckRemoveSection(System.String)">
|
<summary>
|
Checks whether a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Remove(System.String)"/> should be extended.<br/>
|
If the call should be extended performs the extended behavior.
|
</summary>
|
<param name="sectionName">The name of the section that should be removed from configuration.</param>
|
<returns><see langword="true"/> if the call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Remove(System.String)"/> was handled by the extension.</returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Remove(System.String)"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.DoCheckRemoveSection(System.String)">
|
<summary>
|
When overridden in a derived class, checks whether a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Remove(System.String)"/> should be extended.<br/>
|
If the call should be extended performs the extended behavior.
|
</summary>
|
<param name="sectionName">The name of the section that should be removed from configuration.</param>
|
<returns><see langword="false"/></returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Remove(System.String)"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.Initialize">
|
<summary>
|
Performs intialization logic for this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.Refresh">
|
<summary>
|
Performs re-intialization logic for this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.DoRefresh">
|
<summary>
|
Perform required refresh actions as needed when source changes.
|
</summary>
|
<returns>Sequence of changed sections</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.DoConfigurationSourceChanged(System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Raises the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.ConfigurationSectionChanged"/> event.
|
</summary>
|
<param name="affectedSections">The names of the sections that are changed.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.DoConfigurationSectionChanged(System.String)">
|
<summary>
|
Raises the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.ConfigurationSectionChanged"/> event.
|
</summary>
|
<param name="sectionName">The name of the section that was changed.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.AddCustomSubordinateSource(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Adds a subordinate <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> to the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler"/>.
|
This <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> will not be refreshed or disposed.
|
</summary>
|
<param name="sourceName">The name under which the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> will be added.</param>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> that will be added.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.GetSubordinateSource(System.String)">
|
<summary>
|
Returns a subordinate <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> with the specified name.<br/>
|
Throws <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> if the source was not found.
|
</summary>
|
<param name="sourceName">The name of the source that should be returned.</param>
|
<returns>The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> instance.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.EnsurePropagatingSectionChangeEvents(System.String,System.String)">
|
<summary>
|
Ensures <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.ConfigurationSourceChanged"/> events are raised for
|
Changes in a subordinate section.
|
</summary>
|
<param name="sourceName">The name of the subordinate configuration source that contains the section.</param>
|
<param name="sectionName">The name of the section events should be propagated for.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.StopPropagatingSectionChangeEvents(System.String)">
|
<summary>
|
Stops raising <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.ConfigurationSourceChanged"/> events for
|
Changes in a subordinate section.
|
</summary>
|
<param name="sectionName">The name of the section events are propagated for.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.Dispose">
|
<summary>
|
Releases resources managed by this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler"/> instance.
|
</summary>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.ConfigurationSectionChanged">
|
<summary>
|
Indicate that a mapped section from one of the subordinate <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>'s was changed.
|
</summary>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler.ConfigurationSourceChanged">
|
<summary>
|
Indicate a subordinate <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>'s was changed.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler">
|
<summary>
|
Implements compositional merge behavior to <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> implementations.<br/>
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler"/>.
|
</summary>
|
<param name="mainConfigurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> instance that should be extended.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler.Initialize">
|
<summary>
|
Performs intialization logic for this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler.DoRefresh">
|
<summary>
|
Performs re-intialization logic for this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler.DoCheckGetSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Checks whether the result of a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.GetSection(System.String)"/> should be deferred to a subordinate source.<br/>
|
If the call should be deferred, returns the <see cref="T:System.Configuration.ConfigurationSection"/> intance from the approriate source.<br/>
|
If the call should not be deferred returns <paramref name="configurationSection"/>.
|
</summary>
|
<param name="sectionName">The name of the section that was retrieved from configuration.</param>
|
<param name="configurationSection">The section that was retrieved from configuration.</param>
|
<returns>The resulting <see cref="T:System.Configuration.ConfigurationSection"/> instance.</returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.GetSection(System.String)"/>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException">Thrown if a section does not exist in a registered source.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler.DoCheckAddSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Checks whether a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)"/> should be deferred to a subordinate source.<br/>
|
If the call should be deferred, adds the <paramref name="configurationSection"/> to the appropriate source and returns <see langword="true"/>.<br/>
|
If the call should not be deferred returns <see langword="true"/>.
|
</summary>
|
<param name="sectionName">The name of the section that should be added to configuration.</param>
|
<param name="configurationSection">The section that should be added to configuration.</param>
|
<returns><see langword="true"/> if the section was added in a subordinate source, otherwise <see langword="false"/>.</returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CompositeConfigurationSourceHandler.DoCheckRemoveSection(System.String)">
|
<summary>
|
Checks whether a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Remove(System.String)"/> should be deferred to a subordinate source.<br/>
|
If the call should be deferred, removes the section from the appropriate source and returns <see langword="true"/>.<br/>
|
If the call should not be deferred returns <see langword="true"/>.
|
</summary>
|
<param name="sectionName">The name of the section that should be removed from configuration.</param>
|
<returns><see langword="true"/> if the section was removed from a subordinate source, otherwise <see langword="false"/>.</returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Remove(System.String)"/>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilder">
|
<summary>
|
Entry point that is used for programatically building up a configution source.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder">
|
<summary>
|
Defines a configuration source builder.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.IFluentInterface">
|
<summary>
|
Interface that is used to build fluent interfaces and hides methods declared by <see cref="T:System.Object"/> from IntelliSense.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.IFluentInterface.GetType">
|
<summary>
|
Redeclaration that hides the <see cref="M:System.Object.GetType"/> method from IntelliSense.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.IFluentInterface.GetHashCode">
|
<summary>
|
Redeclaration that hides the <see cref="M:System.Object.GetHashCode"/> method from IntelliSense.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.IFluentInterface.ToString">
|
<summary>
|
Redeclaration that hides the <see cref="M:System.Object.ToString"/> method from IntelliSense.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.IFluentInterface.Equals(System.Object)">
|
<summary>
|
Redeclaration that hides the <see cref="M:System.Object.Equals(System.Object)"/> method from IntelliSense.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder.AddSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the builder.
|
</summary>
|
<param name="sectionName">Name of section to add.</param>
|
<param name="section">Configuration section to add.</param>
|
<returns></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder.Contains(System.String)">
|
<summary>
|
Determines if a section name is contained in the builder.
|
</summary>
|
<param name="sectionName"></param>
|
<returns>True if contained in the builder, false otherwise.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder.Get(System.String)">
|
<summary>
|
Returns a configuration section with the given name, if present in the builder.
|
</summary>
|
<param name="sectionName">Name of section to return.</param>
|
<returns>A valid configuration section or null.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder.Get``1(System.String)">
|
<summary>
|
Returns a configuration section of type <typeparamref name="T"/>, if present in the builder.
|
</summary>
|
<param name="sectionName">Section name to retrieve</param>
|
<typeparam name="T"><see cref="T:System.Configuration.ConfigurationSection"/> type to return.</typeparam>
|
<returns></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder.UpdateConfigurationWithReplace(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Updates a configuration source replacing any existing sections with those
|
built up with the builder.
|
</summary>
|
<param name="source"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilder.AddSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the builder.
|
</summary>
|
<param name="sectionName">Name of section to add.</param>
|
<param name="configurationSection">Configuration section to add.</param>
|
<returns></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilder.Contains(System.String)">
|
<summary>
|
Determines if a section name is contained in the builder.
|
</summary>
|
<param name="sectionName"></param>
|
<returns>True if contained in the builder, false otherwise.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilder.Get(System.String)">
|
<summary>
|
Returns a configuration section with the given name, if present in the builder.
|
</summary>
|
<param name="sectionName">Name of section to return.</param>
|
<returns>A valid configuration section or null.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilder.Get``1(System.String)">
|
<summary>
|
Returns a configuration section of type <typeparamref name="T"/>, if present in the builder.
|
</summary>
|
<param name="sectionName">Section name to retrieve</param>
|
<typeparam name="T"><see cref="T:System.Configuration.ConfigurationSection"/> type to return.</typeparam>
|
<returns></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilder.UpdateConfigurationWithReplace(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Updates a configuration source replacing any existing sections with those
|
built up with the builder.
|
</summary>
|
<param name="source"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilder.ToString">
|
<summary/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilder.Microsoft#Practices#EnterpriseLibrary#Common#IFluentInterface#GetType">
|
<summary>
|
Entry point that is used for programatically building up a configution source.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator">
|
<summary>
|
Base class that manages the logic for tracking configuration source changes and
|
reconfiguring the container, and raising all the appropriate events.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerConfigurator">
|
<summary>
|
Implement this interface to create an object that can read a set
|
of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects representing the current
|
Enterprise Library configuration and configure a dependency injection
|
container with that information.
|
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerConfigurator.RegisterAll(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider)">
|
<summary>
|
Consume the set of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects and
|
configure the associated container.
|
</summary>
|
<param name="configurationSource">Configuration source to read registrations from.</param>
|
<param name="rootProvider"><see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> that knows how to
|
read the <paramref name="configurationSource"/> and return all relevant type registrations.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource">
|
<summary>
|
A interface describing objects that raise events when a
|
container's type registrations need to updated due to
|
a configuration source change.
|
</summary>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource.ContainerReconfiguring">
|
<summary>
|
The event raised when a container must be reconfigured.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator.Dispose">
|
<summary>
|
Deregister for change notification on the configuration source.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator.RegisterAll(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider)">
|
<summary>
|
Consume the set of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects and
|
configure the associated container.
|
</summary>
|
<param name="configurationSource">Configuration source to read registrations from.</param>
|
<param name="rootProvider"><see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> that knows how to
|
read the <paramref name="configurationSource"/> and return all relevant type registrations.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator.RegisterAllCore(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider)">
|
<summary>
|
When overridden in a derived class, this method should perform the actual registration with the container.
|
</summary>
|
<param name="configurationSource">Configuration source to read registrations from.</param>
|
<param name="rootProvider"><see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> that knows how to
|
read the <paramref name="configurationSource"/> and return all relevant type registrations.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator.RegisterUpdates(System.Collections.Generic.IEnumerable{Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration})">
|
<summary>
|
When overridden in a derived class, this method should reconfigure the container
|
with the provided <paramref name="updatedRegistrations"/>.
|
</summary>
|
<param name="updatedRegistrations">The new type registrations to apply to the container.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator.GetLocator">
|
<summary>
|
When overridden in a derived class, this method should return an implementation
|
of <see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> that wraps the actual container.
|
</summary>
|
<returns>The <see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> that objects can use to re-resolve
|
dependencies after the container has been reconfigured.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator.OnConfigurationSourceChanged(System.Object,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs)">
|
<summary>
|
Raise the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator.ContainerReconfiguring"/> event in response to a configuration source change.
|
</summary>
|
<param name="sender">Source of the event - the configuraton source.</param>
|
<param name="e">Event arguments.</param>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator.ContainerReconfiguring">
|
<summary>
|
The event raised when this container must be reconfigured.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ChangeTrackingContainerConfigurator.ChangeEventSource">
|
<summary>
|
The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource"/> implementation that should
|
be registered with the container. This object will be used to signal interested
|
objects that the container has completed reconfiguration.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerReconfiguringEventArgs">
|
<summary>
|
This class is the event arguments received when a container is being
|
reconfigured due to a configuration source change. This class is a
|
collecting argument: new type registrations should be added via the
|
AddTypeRegistrations method.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerReconfiguringEventArgs.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerReconfiguringEventArgs"/> class.
|
</summary>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> that changed,
|
causing the need to reconfigure the container.</param>
|
<param name="changedSectionNames">Sequence of changed section names in
|
<paramref name="configurationSource"/>.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerReconfiguringEventArgs.AddTypeRegistrations(System.Collections.Generic.IEnumerable{Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration})">
|
<summary>
|
Called by event receivers to collect the set of type registrations that
|
must be used to update the container.
|
</summary>
|
<param name="newRegistrations">The new set of type registrations.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerReconfiguringEventArgs.ConfigurationSource">
|
<summary>
|
The updated configuration source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerReconfiguringEventArgs.ChangedSectionNames">
|
<summary>
|
The section names that have changed.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationBasedTypeRegistrationsProviderFactory">
|
<summary>
|
A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> that can be configured through a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationBasedTypeRegistrationsProviderFactory.CreateProvider">
|
<summary>
|
Create a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> that contains all the default registration
|
providers, ignoring any configuration section.
|
</summary>
|
<returns>The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> that will return all registrations.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationBasedTypeRegistrationsProviderFactory.CreateProvider(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource)">
|
<summary>
|
Create a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> that contains all the default registration
|
providers, honoring any configuration overrides of locators.
|
</summary>
|
<param name="configurationSource">The configuration source to use when creating <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/>s</param>
|
<param name="reconfiguringEventSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource"/> responsible for raising container reconfiguration events.</param>
|
<returns>The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> that will return all registrations.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationBasedTypeRegistrationsProviderFactory.CreateTypeRegistrationsProviderLocators(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource)">
|
<summary>
|
public for unittesting purposes.
|
</summary>
|
<param name="configurationSource"></param>
|
<param name="reconfiguringEventSource"></param>
|
<returns></returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource">
|
<summary>
|
An object that can be injected into various entlib objects
|
that supplies events that indicate when the current configuration
|
source has changed. This provides some isolation from the actual
|
configuration source.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource.GetSection``1">
|
<summary>
|
Used to get an object that lets you register a change handler for a
|
particular configuration section.
|
</summary>
|
<typeparam name="TSection">Type of the configuration section to register against.</typeparam>
|
<returns>The object that implements the SectionChanged event.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource.OnSourceChanged(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.ServiceLocation.IServiceLocator,System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Utility function to raise the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource.SourceChanged"/> event.
|
</summary>
|
<param name="configurationSource">Configuration source that changed.</param>
|
<param name="container"><see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> object that has been configured with the
|
contents of <paramref name="configurationSource"/>.</param>
|
<param name="changedSectionNames">Sequence of the section names in <paramref name="configurationSource"/>
|
that have changed.</param>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource.SourceChanged">
|
<summary>
|
Event raised when the underlying configuration source has changed
|
any section.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource.ISourceChangeEventSource`1">
|
<summary>
|
A helper interface used as the return type of the GetSection method.
|
</summary>
|
<typeparam name="TSection"></typeparam>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource.ISourceChangeEventSource`1.SectionChanged">
|
<summary>
|
The event raised when the section of type TSection is
|
changed.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSourceImpl">
|
<summary>
|
The primary implementation of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSourceImpl.GetSection``1">
|
<summary>
|
Used to get an object that lets you register a change handler for a
|
particular configuration section.
|
</summary>
|
<typeparam name="TSection">Type of the configuration section to register against.</typeparam>
|
<returns>The object that implements the SectionChanged event.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSourceImpl.ConfigurationSourceChanged(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.ServiceLocation.IServiceLocator,System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Used to raise the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource.SourceChanged"/> event,
|
supplying the appropriate event args.
|
</summary>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> that changed.</param>
|
<param name="container"><see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> which has been configured with the
|
contents of the <paramref name="configurationSource"/>.</param>
|
<param name="changedSectionNames">Section names in the <paramref name="configurationSource"/>
|
that have changed, as reported by the configuration source.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSourceImpl.ConfigurationSourceChanged(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.ServiceLocation.IServiceLocator,System.String[])">
|
<summary>
|
Used to raise the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigurationChangeEventSource.SourceChanged"/> event,
|
and the associated section changed events.
|
</summary>
|
<remarks>This overload is primarily provided for test convenience.</remarks>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> that changed.</param>
|
<param name="container"><see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> which has been configured with the
|
contents of the <paramref name="configurationSource"/>.</param>
|
<param name="changedSectionNames">Section names in the <paramref name="configurationSource"/>
|
that have changed, as reported by the configuration source.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.NullContainerReconfiguringEventSource">
|
<summary>
|
An implementation of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource"/> that does
|
nothing. Saves null checking everywhere.
|
</summary>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.NullContainerReconfiguringEventSource.ContainerReconfiguring">
|
<summary>
|
The event raised when the configuration source changes.
|
</summary>
|
<remarks>With this implementation the event is never raised.</remarks>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor">
|
<summary>
|
This class implements the Visitor pattern over the hierarchy of
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue"/> types. This makes it easier for container
|
authors to figure out which type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue"/> they're
|
dealing with and centralize processing without manually having to switch
|
on the runtime type.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor.Visit(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue)">
|
<summary>
|
Main entry point. When this method is called, this class will figure out
|
the current runtime type of the passed <paramref name="parameterValue"/>
|
and then call the corresponding strongly-typed visit method based on that runtime
|
type.
|
</summary>
|
<param name="parameterValue">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue"/> object to process.</param>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor.VisitConstantParameterValue(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConstantParameterValue)"/>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor.VisitResolvedParameterValue(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter)"/>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor.VisitEnumerableParameterValue(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedEnumerableParameter)"/>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor.VisitParameterValue(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue)"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor.VisitConstantParameterValue(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConstantParameterValue)">
|
<summary>
|
The method called when a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConstantParameterValue"/> object is visited.
|
</summary>
|
<remarks>By default, this method throws an exception. Override it to provide your
|
specific processing.</remarks>
|
<param name="parameterValue">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConstantParameterValue"/> to process.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor.VisitResolvedParameterValue(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter)">
|
<summary>
|
The method called when a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter"/> object is visited.
|
</summary>
|
<remarks>By default, this method throws an exception. Override it to provide your
|
specific processing.</remarks>
|
<param name="parameterValue">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter"/> to process.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor.VisitEnumerableParameterValue(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedEnumerableParameter)">
|
<summary>
|
The method called when a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedEnumerableParameter"/> object is visited.
|
</summary>
|
<remarks>By default, this method throws an exception. Override it to provide your
|
specific processing.</remarks>
|
<param name="parameterValue">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedEnumerableParameter"/> to process.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValueVisitor.VisitParameterValue(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue)">
|
<summary>
|
The method called when a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue"/> object is visited and we haven't
|
been able to otherwise identify the runtime type as a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConstantParameterValue"/>,
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter"/>, or <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedEnumerableParameter"/>.
|
</summary>
|
<remarks>By default, this method throws an exception. Override it to provide your
|
specific processing or do further type checking if you have extended the type hierarchy.</remarks>
|
<param name="parameterValue">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue"/> to process.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData">
|
<summary>
|
A configuration element that allows you to configure arbitrary
|
call handlers that don't otherwise have configuration support.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IHelperAssistedCustomConfigurationData`1">
|
<summary>
|
This interface must be implemented by configuration objects for custom providers that rely
|
on a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1"/> to perform the dynamic properties management.
|
</summary>
|
<remarks>
|
This interface is generic so that the helper can be strongly-typed.
|
</remarks>
|
<typeparam name="T">The configuration object type. It must match the type implementing the interface.</typeparam>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICustomProviderData">
|
<summary>
|
Represents the configuration settings for a custom provider.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICustomProviderData.Name">
|
<summary>
|
Gets the name for the represented provider.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICustomProviderData.Attributes">
|
<summary>
|
Gets the attributes for the represented provider.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IHelperAssistedCustomConfigurationData`1.BaseGetPropertyValue(System.Configuration.ConfigurationProperty)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Returns the value for the specified property using the inherited implementation.
|
</summary>
|
<param name="property">The property to get the value from.</param>
|
<returns>The value for the property.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IHelperAssistedCustomConfigurationData`1.BaseIsModified">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Returns the modification status using the inherited implementation.
|
</summary>
|
<returns><b>true</b> if the configuration element has been modified, <b>false</b> otherwise.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IHelperAssistedCustomConfigurationData`1.BaseReset(System.Configuration.ConfigurationElement)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Resets the internal state of the configuration object using the inherited implementation.
|
</summary>
|
<param name="parentElement">The parent node of the configuration element.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IHelperAssistedCustomConfigurationData`1.BaseSetPropertyValue(System.Configuration.ConfigurationProperty,System.Object)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Sets the value for the specified property using the inherited implementation.
|
</summary>
|
<param name="property">The property to set the value to.</param>
|
<param name="value">The new value for the property.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IHelperAssistedCustomConfigurationData`1.BaseUnmerge(System.Configuration.ConfigurationElement,System.Configuration.ConfigurationElement,System.Configuration.ConfigurationSaveMode)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Modifies the <b>ConfigurationElement</b> object to remove all values that should not be saved using the inherited implementation.
|
</summary>
|
<param name="sourceElement">A <see cref="T:System.Configuration.ConfigurationElement"/> object at the current level containing a merged view of the properties.</param>
|
<param name="parentElement">The parent <b>ConfigurationElement</b> object, or a null reference (Nothing in Visual Basic) if this is the top level.</param>
|
<param name="saveMode">A <see cref="T:System.Configuration.ConfigurationSaveMode"/> object that determines which property values to include.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IHelperAssistedCustomConfigurationData`1.Helper">
|
<summary>
|
Gets the helper that manages the configuration information.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.#ctor">
|
<summary>
|
Constructs a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData"/> instance.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.#ctor(System.String,System.Type)">
|
<summary>
|
Constructs a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData"/> instance.
|
</summary>
|
<param name="name">Name of handler instance.</param>
|
<param name="type">Type of handler to configure.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.#ctor(System.String,System.String)">
|
<summary>
|
Constructs a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData"/> instance.
|
</summary>
|
<param name="name">Name of handler instance.</param>
|
<param name="typeName">Name of the handler type to configure.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.#ctor(System.String,System.String,System.Int32)">
|
<summary>
|
Constructs a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData"/> instance.
|
</summary>
|
<param name="name">Name of handler instance.</param>
|
<param name="typeName">Name of the handler type to configure.</param>
|
<param name="handlerOrder">Order of the handler type to configure.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.SetAttributeValue(System.String,System.String)">
|
<summary>
|
Sets the attribute value for a key.
|
</summary>
|
<param name="key">The attribute name.</param>
|
<param name="value">The attribute value.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Unmerge(System.Configuration.ConfigurationElement,System.Configuration.ConfigurationElement,System.Configuration.ConfigurationSaveMode)">
|
<summary>
|
Modifies the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData"/> object to remove all values that should not be saved.
|
</summary>
|
<param name="sourceElement">A <see cref="T:System.Configuration.ConfigurationElement"/> object at the current level containing a merged view of the properties.</param>
|
<param name="parentElement">A parent <see cref="T:System.Configuration.ConfigurationElement"/> object or <see langword="null"/> if this is the top level.</param>
|
<param name="saveMode">One of the <see cref="T:System.Configuration.ConfigurationSaveMode"/> values.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Reset(System.Configuration.ConfigurationElement)">
|
<summary>
|
Resets the internal state of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData"/> object,
|
including the locks and the properties collection.
|
</summary>
|
<param name="parentElement">The parent element.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.IsModified">
|
<summary>
|
Indicates whether this configuration element has been modified since it was last
|
saved or loaded when implemented in a derived class.
|
</summary>
|
<returns><see langword="true"/> if the element has been modified; otherwise, <see langword="false"/>. </returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.OnDeserializeUnrecognizedAttribute(System.String,System.String)">
|
<summary>
|
Called when an unknown attribute is encountered while deserializing the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData"/> object.
|
</summary>
|
<param name="name">The name of the unrecognized attribute.</param>
|
<param name="value">The value of the unrecognized attribute.</param>
|
<returns><see langword="true"/> if the processing of the element should continue; otherwise, <see langword="false"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Microsoft#Practices#EnterpriseLibrary#Common#Configuration#IHelperAssistedCustomConfigurationData{Microsoft#Practices#EnterpriseLibrary#Common#Configuration#CustomCallHandlerData}#BaseGetPropertyValue(System.Configuration.ConfigurationProperty)">
|
<summary>Invokes the inherited behavior.</summary>
|
<param name="property">Gets the given property value.</param>
|
<returns>the requested property's value</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Microsoft#Practices#EnterpriseLibrary#Common#Configuration#IHelperAssistedCustomConfigurationData{Microsoft#Practices#EnterpriseLibrary#Common#Configuration#CustomCallHandlerData}#BaseSetPropertyValue(System.Configuration.ConfigurationProperty,System.Object)">
|
<summary>Invokes the inherited behavior.</summary>
|
<param name="property">Sets the given property.</param>
|
<param name="value">New value for the property.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Microsoft#Practices#EnterpriseLibrary#Common#Configuration#IHelperAssistedCustomConfigurationData{Microsoft#Practices#EnterpriseLibrary#Common#Configuration#CustomCallHandlerData}#BaseUnmerge(System.Configuration.ConfigurationElement,System.Configuration.ConfigurationElement,System.Configuration.ConfigurationSaveMode)">
|
<summary>Invokes the inherited behavior.</summary>
|
<param name="sourceElement">Source configuration element</param>
|
<param name="parentElement">Parent configuration element</param>
|
<param name="saveMode">ConfigurationSaveMode</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Microsoft#Practices#EnterpriseLibrary#Common#Configuration#IHelperAssistedCustomConfigurationData{Microsoft#Practices#EnterpriseLibrary#Common#Configuration#CustomCallHandlerData}#BaseReset(System.Configuration.ConfigurationElement)">
|
<summary>Invokes the inherited behavior.</summary>
|
<param name="parentElement">Parent element</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Microsoft#Practices#EnterpriseLibrary#Common#Configuration#IHelperAssistedCustomConfigurationData{Microsoft#Practices#EnterpriseLibrary#Common#Configuration#CustomCallHandlerData}#BaseIsModified">
|
<summary>Invokes the inherited behavior.</summary>
|
<returns>True if element has been modified, false if not.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.GetRegistrations(System.String)">
|
<summary>
|
Get the set of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to
|
register the call handler represented by this config element and its associated objects.
|
</summary>
|
<param name="nameSuffix">A suffix for the names in the generated type registration objects.</param>
|
<returns>The set of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.TypeName">
|
<summary>
|
Overridden in order to apply <see cref="T:System.ComponentModel.BrowsableAttribute"/>.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Attributes">
|
<summary>
|
Gets or sets custom configuration attributes.
|
</summary>
|
<value>Collection of attributes.</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Properties">
|
<summary>
|
Gets a <see cref="T:System.Configuration.ConfigurationPropertyCollection"/> of the properties that are defined for
|
this configuration element when implemented in a derived class.
|
</summary>
|
<value>
|
A <see cref="T:System.Configuration.ConfigurationPropertyCollection"/> of the properties that are defined for this
|
configuration element when implemented in a derived class.
|
</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomCallHandlerData.Microsoft#Practices#EnterpriseLibrary#Common#Configuration#IHelperAssistedCustomConfigurationData{Microsoft#Practices#EnterpriseLibrary#Common#Configuration#CustomCallHandlerData}#Helper">
|
<summary>
|
Gets the helper.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomConfigurationElementCollection`2">
|
<summary>
|
Represents a collection of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/> objects.
|
</summary>
|
<typeparam name="T">The type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/> object this collection contains.</typeparam>
|
<typeparam name="TCustomElementData">The type used for Custom configuration elements in this collection.</typeparam>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElementCollection`2">
|
<summary>
|
Represents a collection of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/> objects.
|
</summary>
|
<typeparam name="T">The type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/> object this collection contains.</typeparam>
|
<typeparam name="TCustomElementData">The type used for Custom configuration elements in this collection.</typeparam>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.PolymorphicConfigurationElementCollection`1">
|
<summary>
|
Represents the base class from which all implementations of polymorphic configuration collections must derive.
|
</summary>
|
<typeparam name="T">The type contained in the collection.</typeparam>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1">
|
<summary>
|
Represents a collection of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/> objects.
|
</summary>
|
<typeparam name="T">A newable object that inherits from <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/>.</typeparam>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection">
|
<summary>
|
Interface that allows a <see cref="T:System.Configuration.ConfigurationElementCollection"/> to be merged.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection.ResetCollection(System.Collections.Generic.IEnumerable{System.Configuration.ConfigurationElement})">
|
<summary>
|
Resets the elements in the <see cref="T:System.Configuration.ConfigurationElementCollection"/> to the <see cref="T:System.Configuration.ConfigurationElement"/>s passed as <paramref name="configurationElements"/>.
|
</summary>
|
<param name="configurationElements">The new contents of this <see cref="T:System.Configuration.ConfigurationElementCollection"/>.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection.CreateNewElement(System.Type)">
|
<summary>
|
Creates a new <see cref="T:System.Configuration.ConfigurationElement"/> for the specifies <paramref name="configurationType"/>.
|
</summary>
|
<param name="configurationType">The type of <see cref="T:System.Configuration.ConfigurationElement"/> that should be created.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.ForEach(System.Action{`0})">
|
<summary>
|
Performs the specified action on each element of the collection.
|
</summary>
|
<param name="action">The action to perform.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.Get(System.Int32)">
|
<summary>
|
Gets the configuration element at the specified index location.
|
</summary>
|
<param name="index">The index location of the <see name="T"/> to return. </param>
|
<returns>The <see name="T"/> at the specified index. </returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.Add(`0)">
|
<summary>
|
Add an instance of <typeparamref name="T"/> to the collection.
|
</summary>
|
<param name="element">An instance of <typeparamref name="T"/>.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.Get(System.String)">
|
<summary>
|
Gets the named instance of <typeparamref name="T"/> from the collection.
|
</summary>
|
<param name="name">The name of the <typeparamref name="T"/> instance to retrieve.</param>
|
<returns>The instance of <typeparamref name="T"/> with the specified key; otherwise, <see langword="null"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.Contains(System.String)">
|
<summary>
|
Determines if the name exists in the collection.
|
</summary>
|
<param name="name">The name to search.</param>
|
<returns><see langword="true"/> if the name is contained in the collection; otherwise, <see langword="false"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.Remove(System.String)">
|
<summary>
|
Remove the named element from the collection.
|
</summary>
|
<param name="name">The name of the element to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.Clear">
|
<summary>
|
Clear the collection.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.GetEnumerator">
|
<summary>
|
Returns an enumerator that iterates through the collection.
|
</summary>
|
<returns>An enumerator that iterates through the collection.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.CreateNewElement">
|
<summary>
|
Creates a new instance of a <typeparamref name="T"/> object.
|
</summary>
|
<returns>A new <see cref="T:System.Configuration.ConfigurationElement"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection`1.GetElementKey(System.Configuration.ConfigurationElement)">
|
<summary>
|
Gets the element key for a specified configuration element when overridden in a derived class.
|
</summary>
|
<param name="element">The <see cref="T:System.Configuration.ConfigurationElement"/> to return the key for. </param>
|
<returns>An <see cref="T:System.Object"/> that acts as the key for the specified <see cref="T:System.Configuration.ConfigurationElement"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.PolymorphicConfigurationElementCollection`1.Reset(System.Configuration.ConfigurationElement)">
|
<summary>
|
Resets the internal state of the <see cref="T:System.Configuration.ConfigurationElement"/> object, including the locks and the properties collections.
|
</summary>
|
<param name="parentElement">The parent node of the configuration element.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.PolymorphicConfigurationElementCollection`1.OnDeserializeUnrecognizedElement(System.String,System.Xml.XmlReader)">
|
<summary>
|
Called when an unknown element is encountered while deserializing the <see cref="T:System.Configuration.ConfigurationElement"/> object.
|
</summary>
|
<param name="elementName">The name of the element.</param>
|
<param name="reader">The <see cref="T:System.Xml.XmlReader"/> used to deserialize the element.</param>
|
<returns><see langword="true"/> if the element was handled; otherwise, <see langword="false"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.PolymorphicConfigurationElementCollection`1.RetrieveConfigurationElementType(System.Xml.XmlReader)">
|
<summary>
|
When overriden in a class, get the configuration object for each <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/> object in the collection.
|
</summary>
|
<param name="reader">The <see cref="T:System.Xml.XmlReader"/> that is deserializing the element.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.PolymorphicConfigurationElementCollection`1.CreateNewElement">
|
<summary>
|
Creates a new <see cref="T:System.Configuration.ConfigurationElement"/>.
|
</summary>
|
<returns>A new <see cref="T:System.Configuration.ConfigurationElement"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.PolymorphicConfigurationElementCollection`1.CreateNewElement(System.String)">
|
<summary>
|
Creates a new named <see cref="T:System.Configuration.ConfigurationElement"/>.
|
</summary>
|
<param name="elementName">The name of the element to create.</param>
|
<returns>A new <see cref="T:System.Configuration.ConfigurationElement"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.PolymorphicConfigurationElementCollection`1.Unmerge(System.Configuration.ConfigurationElement,System.Configuration.ConfigurationElement,System.Configuration.ConfigurationSaveMode)">
|
<summary>
|
Reverses the effect of merging configuration information from different levels of the configuration hierarchy.
|
</summary>
|
<param name="sourceElement">A <see cref="T:System.Configuration.ConfigurationElement"/> object at the current level containing a merged view of the properties.</param>
|
<param name="parentElement">The parent <see cref="T:System.Configuration.ConfigurationElement"/> object of the current element, or a <see langword="null"/> reference (Nothing in Visual Basic) if this is the top level.</param>
|
<param name="saveMode">One of the <see cref="T:System.Configuration.ConfigurationSaveMode"/> values.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElementCollection`2.RetrieveConfigurationElementType(System.Xml.XmlReader)">
|
<summary>
|
Get the configuration object for each <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/> object in the collection.
|
</summary>
|
<param name="reader">The <see cref="T:System.Xml.XmlReader"/> that is deserializing the element.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomConfigurationElementCollection`2.RetrieveConfigurationElementType(System.Xml.XmlReader)">
|
<summary>
|
Get the configuration object for each <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/> object in the collection.
|
</summary>
|
<param name="reader">The <see cref="T:System.Xml.XmlReader"/> that is deserializing the element.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources">
|
<summary>
|
A strongly-typed resource class, for looking up localized strings, etc.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ResourceManager">
|
<summary>
|
Returns the cached ResourceManager instance used by this class.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.Culture">
|
<summary>
|
Overrides the current thread's CurrentUICulture property for all
|
resource lookups using this strongly typed resource class.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.AddApplicationSettingsTitle">
|
<summary>
|
Looks up a localized string similar to Add Application Settings.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.AddConfigurationSourcesTitle">
|
<summary>
|
Looks up a localized string similar to Add Configuration Settings.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.AddInstrumentationSettingsTitle">
|
<summary>
|
Looks up a localized string similar to Add Instrumentation Settings.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.AppSettingsSectionMetadataDescription">
|
<summary>
|
Looks up a localized string similar to Application Settings .
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.AppSettingsSectionMetadataDisplayName">
|
<summary>
|
Looks up a localized string similar to Application Settings.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.CallHandlerDataOrderDescription">
|
<summary>
|
Looks up a localized string similar to The position of the handler within the policy handler chain, starting from 1.
|
The default value is zero, which means that there is no explicit order specified for
|
the handler in relation to other handlers in the same handler chain..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.CallHandlerDataOrderDisplayName">
|
<summary>
|
Looks up a localized string similar to Order.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.CategoryGeneral">
|
<summary>
|
Looks up a localized string similar to General.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.CategoryLocalization">
|
<summary>
|
Looks up a localized string similar to Localization.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.CategoryName">
|
<summary>
|
Looks up a localized string similar to (name).
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationElementManageabilityProviderDataDescription">
|
<summary>
|
Looks up a localized string similar to A manageability provider for a configuration element..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationElementManageabilityProviderDataDisplayName">
|
<summary>
|
Looks up a localized string similar to Configuration Element Manageability Provider.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationElementManageabilityProviderDataNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the Configuration Element Manageability Provider..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationElementManageabilityProviderDataNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationElementManageabilityProviderDataTargetTypeDescription">
|
<summary>
|
Looks up a localized string similar to The type that is managed by the manageability provider..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationElementManageabilityProviderDataTargetTypeDisplayName">
|
<summary>
|
Looks up a localized string similar to Target Type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationElementManageabilityProviderDataTypeNameDescription">
|
<summary>
|
Looks up a localized string similar to The fully qualified type name of the Configuration Element Manageability Provider..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationElementManageabilityProviderDataTypeNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSectionManageabilityProviderDataDescription">
|
<summary>
|
Looks up a localized string similar to A manageability provider for a configuration section..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSectionManageabilityProviderDataDisplayName">
|
<summary>
|
Looks up a localized string similar to Configuration Section Manageability Provider.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSectionManageabilityProviderDataManageabilityProvidersDescription">
|
<summary>
|
Looks up a localized string similar to A collection of Manageability Providers that the receiver might require to provide
|
manageability to configuration elements..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSectionManageabilityProviderDataManageabilityProvidersDisplayName">
|
<summary>
|
Looks up a localized string similar to Manageability Providers.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSectionManageabilityProviderDataNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the Manageability Provider..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSectionManageabilityProviderDataNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSectionManageabilityProviderDataTypeNameDescription">
|
<summary>
|
Looks up a localized string similar to The fully qualified type name of the Manageability Provider..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSectionManageabilityProviderDataTypeNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceElementDescription">
|
<summary>
|
Looks up a localized string similar to The element that represents a configuration source ..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceElementDisplayName">
|
<summary>
|
Looks up a localized string similar to An element that contains configurtain information..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceElementNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the Configuration Source Element..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceElementNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceElementTypeNameDescription">
|
<summary>
|
Looks up a localized string similar to The fully qualified type name of the Configuration Source Element..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceElementTypeNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionDescription">
|
<summary>
|
Looks up a localized string similar to Configuration settings that determine the sources of configuration information for an application..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionDisplayName">
|
<summary>
|
Looks up a localized string similar to Configuration Sources.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionParentSourceDescription">
|
<summary>
|
Looks up a localized string similar to The name of the Configuration Source containing the section that this Redirected Section will override..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionParentSourceDisplayName">
|
<summary>
|
Looks up a localized string similar to Parent Source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionRedirectedSectionsDescription">
|
<summary>
|
Looks up a localized string similar to The list of Redirected Sections for this application configuration..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionRedirectedSectionsDisplayName">
|
<summary>
|
Looks up a localized string similar to Redirected Sections.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionSelectedSourceDescription">
|
<summary>
|
Looks up a localized string similar to The name of the default Configuration Source..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionSelectedSourceDisplayName">
|
<summary>
|
Looks up a localized string similar to Selected Source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionSourcesDescription">
|
<summary>
|
Looks up a localized string similar to The collection of defined configuration sources..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ConfigurationSourceSectionSourcesDisplayName">
|
<summary>
|
Looks up a localized string similar to Sources.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.CustomCallHandlerDataDescription">
|
<summary>
|
Looks up a localized string similar to A custom implementation of a Call Handler that is added to Enterprise Library..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.CustomCallHandlerDataDisplayName">
|
<summary>
|
Looks up a localized string similar to Custom Call Handler.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.CustomCallHandlerDataTypeNameDescription">
|
<summary>
|
Looks up a localized string similar to The fully qualified type name of the Custom Call Handler..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.CustomCallHandlerDataTypeNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.FileConfigurationSourceElementDescription">
|
<summary>
|
Looks up a localized string similar to A Configuration Source that reads configuration information from a disk file.
|
The file must contain XML data in the standard .NET configuration format..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.FileConfigurationSourceElementDisplayName">
|
<summary>
|
Looks up a localized string similar to File-based Configuration Source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.FileConfigurationSourceElementFilePathDescription">
|
<summary>
|
Looks up a localized string similar to The full path and name of the configuration file..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.FileConfigurationSourceElementFilePathDisplayName">
|
<summary>
|
Looks up a localized string similar to File Path.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.FileConfigurationSourceElementFilePathFilter">
|
<summary>
|
Looks up a localized string similar to Configuration files (*.config)|*.config|All Files (*.*)|*.*.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.FileConfigurationSourceElementNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the File-based Configuration Source..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.FileConfigurationSourceElementNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.FileConfigurationSourceElementTypeNameDescription">
|
<summary>
|
Looks up a localized string similar to The fully qualified type name of the File-based Configuration Source..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.FileConfigurationSourceElementTypeNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.InstrumentationConfigurationSectionApplicationInstanceNameDescription">
|
<summary>
|
Looks up a localized string similar to The unique name for the Application Instance to be used by the Instrumentation providers..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.InstrumentationConfigurationSectionApplicationInstanceNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Application Instance Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.InstrumentationConfigurationSectionDescription">
|
<summary>
|
Looks up a localized string similar to Configuration settings for Instrumentation for the entire application..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.InstrumentationConfigurationSectionDisplayName">
|
<summary>
|
Looks up a localized string similar to Instrumentation Settings.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.InstrumentationConfigurationSectionEventLoggingEnabledDescription">
|
<summary>
|
Looks up a localized string similar to Specifies if logging to Windows Event Log will take place when instrumented
|
events occur within Enterprise Library..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.InstrumentationConfigurationSectionEventLoggingEnabledDisplayName">
|
<summary>
|
Looks up a localized string similar to Event Logging Enabled.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.InstrumentationConfigurationSectionPerformanceCountersEnabledDescription">
|
<summary>
|
Looks up a localized string similar to Specifies if the Enterprise Library Performance Counters will be exposed and updated
|
when instrumented events occur within Enterprise Library..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.InstrumentationConfigurationSectionPerformanceCountersEnabledDisplayName">
|
<summary>
|
Looks up a localized string similar to Performance Counters Enabled.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.KeyValueConfigurationCollectionMetadataDescription">
|
<summary>
|
Looks up a localized string similar to Settings.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.KeyValueConfigurationCollectionMetadataDisplayName">
|
<summary>
|
Looks up a localized string similar to Settings.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.KeyValueConfigurationElementMetadataDescription">
|
<summary>
|
Looks up a localized string similar to A custom application settings, such as file paths or XML Web service URLs..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.KeyValueConfigurationElementMetadataDisplayName">
|
<summary>
|
Looks up a localized string similar to Setting.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.KeyValueConfigurationElementMetadataKeyDescription">
|
<summary>
|
Looks up a localized string similar to Key.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.KeyValueConfigurationElementMetadataKeyDisplayName">
|
<summary>
|
Looks up a localized string similar to Key.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.KeyValueConfigurationElementMetadataValueDescription">
|
<summary>
|
Looks up a localized string similar to Value.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.KeyValueConfigurationElementMetadataValueDisplayName">
|
<summary>
|
Looks up a localized string similar to Value.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementApplicationNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the application.
|
This used to determine the Registry path for the configuration information.
|
This value is required..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementApplicationNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Application Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementConfigurationManageabilityProvidersDescription">
|
<summary>
|
Looks up a localized string similar to The collection of registered types necessary to provide manageability by the configuration source..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementConfigurationManageabilityProvidersDisplayName">
|
<summary>
|
Looks up a localized string similar to Configuration Manageability Providers.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementDescription">
|
<summary>
|
Looks up a localized string similar to A configuration source that integrates with Group Policy to apply domain-wide or
|
local machine policy overrides to provide centralized configuration management capabilities..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementDisplayName">
|
<summary>
|
Looks up a localized string similar to Manageable Configuration Source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementEnableGroupPoliciesDescription">
|
<summary>
|
Looks up a localized string similar to Specifies if the configuration source will take account of domain-wide or
|
local machine policy overrides configured in the Registry through Group Policy settings..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementEnableGroupPoliciesDisplayName">
|
<summary>
|
Looks up a localized string similar to Group Policy Enabled.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementFilePathDescription">
|
<summary>
|
Looks up a localized string similar to The full path and name of the configuration file..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementFilePathDisplayName">
|
<summary>
|
Looks up a localized string similar to File Path.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the Manageable Configuration Source..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementTypeNameDescription">
|
<summary>
|
Looks up a localized string similar to The fully qualified type name of the Manageable Configuration Source..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.ManageableConfigurationSourceElementTypeNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NamedConfigurationElementDescription">
|
<summary>
|
Looks up a localized string similar to A configuration element in a collection that is keyed by the name..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NamedConfigurationElementDisplayName">
|
<summary>
|
Looks up a localized string similar to Named Configuration Element.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NamedConfigurationElementNameDescription">
|
<summary>
|
Looks up a localized string similar to The name used to identify this item..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NamedConfigurationElementNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NamedElementCollectionDescription">
|
<summary>
|
Looks up a localized string similar to A collection of Named Configuration elements..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NamedElementCollectionDisplayName">
|
<summary>
|
Looks up a localized string similar to Named Element Collection.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NameTypeConfigurationElementCollectionDescription">
|
<summary>
|
Looks up a localized string similar to A collection of Name Type Configuration elements..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NameTypeConfigurationElementCollectionDisplayName">
|
<summary>
|
Looks up a localized string similar to Name Type Configuration Element Collection.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NameTypeConfigurationElementDescription">
|
<summary>
|
Looks up a localized string similar to A configuration element in a collection that contains both a type and a name..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NameTypeConfigurationElementDisplayName">
|
<summary>
|
Looks up a localized string similar to Name Type Configuration Element.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NameTypeConfigurationElementNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the Name Type Configuration Element..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NameTypeConfigurationElementNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NameTypeConfigurationElementTypeNameDescription">
|
<summary>
|
Looks up a localized string similar to The fully qualified type name of the Name Type Configuration Element..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.NameTypeConfigurationElementTypeNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Type Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.PolymorphicConfigurationElementCollectionDescription">
|
<summary>
|
Looks up a localized string similar to A base class from which all implementations of polymorphic configuration collections derive..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.PolymorphicConfigurationElementCollectionDisplayName">
|
<summary>
|
Looks up a localized string similar to Polymorphic Configuration Element Collection.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.RedirectedSectionElementDescription">
|
<summary>
|
Looks up a localized string similar to A redirected section for the application configuration.
|
Each section of the configuration can be loaded from a different configuration source if required.
|
Each Redirected Section configured in this list will override the same entire section in
|
the default Configuration Source..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.RedirectedSectionElementDisplayName">
|
<summary>
|
Looks up a localized string similar to Redirected Section.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.RedirectedSectionElementNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the Redirected Section..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.RedirectedSectionElementNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.RedirectedSectionElementSourceNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the Configuration Source that will handle the redirected section.
|
Must be one of the Configuration Sources defined for the application..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.RedirectedSectionElementSourceNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Configuration Source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.SerializableConfigurationSectionDescription">
|
<summary>
|
Looks up a localized string similar to Represents a configuration section that can be serialized and deserialized to XML..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.SerializableConfigurationSectionDisplayName">
|
<summary>
|
Looks up a localized string similar to Serializable Configuration Section.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.SystemConfigurationSourceElementDescription">
|
<summary>
|
Looks up a localized string similar to A configuration source that reads configuration data from the default configuration file.
|
Typically this is App.config or Web.config, depending on the application type..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.SystemConfigurationSourceElementDisplayName">
|
<summary>
|
Looks up a localized string similar to System Configuration Source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.SystemConfigurationSourceElementNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the System Configuration Source..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.SystemConfigurationSourceElementNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.SystemConfigurationSourceElementTypeNameDescription">
|
<summary>
|
Looks up a localized string similar to The fully qualified type name of the System Configuration Source..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.SystemConfigurationSourceElementTypeNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementCollectionDescription">
|
<summary>
|
Looks up a localized string similar to A collection of Type Registration Provider elements..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementCollectionDisplayName">
|
<summary>
|
Looks up a localized string similar to Type Registration Provider Element Collection.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementDescription">
|
<summary>
|
Looks up a localized string similar to A provider for registering types..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementDisplayName">
|
<summary>
|
Looks up a localized string similar to Type Registration Provider Element.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the Type Registration Provider Element..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementProviderTypeNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the type that implements the Type Registration Provider Element..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementProviderTypeNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Provider Type Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementSectionNameDescription">
|
<summary>
|
Looks up a localized string similar to The name of the configuration section within the configuration file..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProviderElementSectionNameDisplayName">
|
<summary>
|
Looks up a localized string similar to Section Name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProvidersConfigurationSectionDescription">
|
<summary>
|
Looks up a localized string similar to The section of the configuration that specifies the Type Registration Providers for the application..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProvidersConfigurationSectionDisplayName">
|
<summary>
|
Looks up a localized string similar to Type Registration Providers Configuration Section.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProvidersConfigurationSectionTypeRegistrationProvidersDescription">
|
<summary>
|
Looks up a localized string similar to A collection of Type Registration providers..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DesignResources.TypeRegistrationProvidersConfigurationSectionTypeRegistrationProvidersDisplayName">
|
<summary>
|
Looks up a localized string similar to Type Registration Providers.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddApplicationBlockCommandAttribute">
|
<summary>
|
Attribute class used to decorate the design time view model with a Add Application Block command. <br/>
|
Add Application Block commands are added to the configuration tools main menu, underneath the 'Blocks' menu item.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute">
|
<summary>
|
Attribute used to decorate a designtime View Model element with an executable command. E.g. a context menu item that allows
|
the user to perform an action in the elements context.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute"/> class, specifying the Command Model Type.
|
</summary>
|
<remarks>
|
The Command Model Type should derive from the CommandModel class in the Configuration.Design assembly. <br/>
|
As this attribute can be applied to the configuration directly and we dont want to force a dependency on the Configuration.Design assembly <br/>
|
You can specify the Command Model Type in a loosy coupled fashion.
|
</remarks>
|
<param name="commandModelTypeName">The fully qualified name of the Command Model Type.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.#ctor(System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute"/> class, specifying the Command Model Type.
|
</summary>
|
<remarks>
|
The Command Model Type should derive from the CommandModel class in the Configuration.Design assmbly. <br/>
|
As this attribute can be applied to the configuration directly and we dont want to force a dependency on the Configuration.Design assembly <br/>
|
You can specify the Command Model Type in a loosy coupled fashion.
|
</remarks>
|
<param name="commandModelType">The Command Model Type.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.TitleResourceName">
|
<summary>
|
Gets or sets the name of the resource, used to return a localized title that will be shown for this command in the UI (User Interface).
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.TitleResourceType">
|
<summary>
|
Gets or sets the type of the resource, used to return a localized title that will be shown for this command in the UI (User Interface).
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.Title">
|
<summary>
|
Gets the title that will be shown for this command in the UI (User Interface).
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.Replace">
|
<summary>
|
Gets or sets the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandReplacement"/> options for this command.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.CommandPlacement">
|
<summary>
|
Gets or sets the <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.CommandPlacement"/> options for this command.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.CommandModelTypeName">
|
<summary>
|
Gets or Sets the Command Model Type Name for this command. <br/>
|
The Command Model Type will be used at runtime to display and execute the command.<br/>
|
Command Model Types should derive from the CommandModel class in the Configuration.Design assembly.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.CommandModelType">
|
<summary>
|
Gets the Command Model Type for this command. <br/>
|
The Command Model Type will be used at runtime to display and execute the command.<br/>
|
Command Model Types should derive from the CommandModel class in the Configuration.Design assembly.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.KeyGesture">
|
<summary>
|
Defines the keyboard gesture for this command.
|
</summary>
|
<example>
|
command.KeyGesture = "Ctrl+1";
|
</example>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandAttribute.TypeId">
|
<summary>
|
When implemented in a derived class, gets a unique identifier for this <see cref="T:System.Attribute"/>.
|
</summary>
|
<returns>
|
An <see cref="T:System.Object"/> that is a unique identifier for the attribute.
|
</returns>
|
<filterpriority>2</filterpriority>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddApplicationBlockCommandAttribute.#ctor(System.String,System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddApplicationBlockCommandAttribute"/> class.
|
</summary>
|
<param name="sectionName">The name of the configuration section that belongs to the application block that will be added.</param>
|
<param name="configurationSectionType">The type of the configuration section that belongs to the application block that will be added.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddApplicationBlockCommandAttribute.SectionName">
|
<summary>
|
Gets the name of the configuration section that belongs to the application block that will be added.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddApplicationBlockCommandAttribute.ConfigurationSectionType">
|
<summary>
|
Gets the type of the configuration section that belongs to the application block that will be added.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddSateliteProviderCommandAttribute">
|
<summary>
|
Attribute used to overwrite the Add Command for providers that depend on the availability of another block (Sattelite Providers).
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddSateliteProviderCommandAttribute.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddSateliteProviderCommandAttribute"/> specifying the block dependency by its configuration section name.<br/>
|
</summary>
|
<param name="sectionName">The name of the configuran section, used to identify the block dependency.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddSateliteProviderCommandAttribute.#ctor(System.String,System.Type,System.String,System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddSateliteProviderCommandAttribute"/> specifying the block dependency by its configuration section name and will assign the value of a default provider to the added element.<br/>
|
</summary>
|
<param name="sectionName">The name of the configuran section, used to identify the block dependency.</param>
|
<param name="defaultProviderConfigurationType">The configuration type of the element that declares the default proviiders name.</param>
|
<param name="defaultProviderConfigurationPropertyName">The property that will be used to determine the name of the default provider.</param>
|
<param name="sateliteProviderReferencePropertyName">The property on the created element that will be assigned the name of the default provider.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddSateliteProviderCommandAttribute.SectionName">
|
<summary>
|
Gets the section name of the block dependency.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddSateliteProviderCommandAttribute.DefaultProviderConfigurationType">
|
<summary>
|
If a configuration element exists that specifies a default property, gets the configuration type of the declaring element.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddSateliteProviderCommandAttribute.DefaultProviderConfigurationPropertyName">
|
<summary>
|
If a configuration element exists that specifies a default property, gets the property that contains the name of the default value.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AddSateliteProviderCommandAttribute.SateliteProviderReferencePropertyName">
|
<summary>
|
If the provider has a property that should be assigned the name of the default provider, gets the name of the property.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime">
|
<summary>
|
Container class for types and identifiers used to decorate the appSettings configuration schema with designtime information.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime.AppSettingsSectionName">
|
<summary>
|
Name of appSettings section.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime.ViewModelTypeNames">
|
<summary>
|
Container class for View Model Types used to decorate the appSettings configuration schema with designtime information.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime.ViewModelTypeNames.AppSettingsSectionViewModel">
|
<summary>
|
Type Name of the Section View Model used to display application settings.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime.MetadataTypes">
|
<summary>
|
This class supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime.MetadataTypes.AppSettingsSectionMetadata">
|
<summary>
|
This class supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime.MetadataTypes.KeyValueConfigurationCollectionMetadata">
|
<summary>
|
This class supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime.MetadataTypes.KeyValueConfigurationElementMetadata">
|
<summary>
|
This class supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime.MetadataTypes.KeyValueConfigurationElementMetadata.Key">
|
<summary>
|
This property supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.AppSettingsDesignTime.MetadataTypes.KeyValueConfigurationElementMetadata.Value">
|
<summary>
|
This property supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute">
|
<summary>
|
Indicates the base class or interface that must be assignable from the type specified in the property that this attribute decorates.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.#ctor(System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute"/> class with the specified <see cref="T:System.Type"/> object.
|
</summary>
|
<param name="baseType">
|
The <see cref="T:System.Type"/> to filter selections.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.#ctor(System.Type,System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute"/> class with the specified base <see cref="T:System.Type"/> object and configuration <see cref="T:System.Type"/>.
|
</summary>
|
<param name="baseType">The base <see cref="T:System.Type"/> to filter.</param>
|
<param name="configurationType">The configuration object <see cref="T:System.Type"/>.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.#ctor(System.Type,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypeSelectorIncludes)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute"/> class with the specified <see cref="T:System.Type"/> object and <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.TypeSelectorIncludes"/>.
|
</summary>
|
<param name="baseType">
|
The <see cref="T:System.Type"/> to filter selections.
|
</param>
|
<param name="typeSelectorIncludes">
|
One of the <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.TypeSelectorIncludes"/> values.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.#ctor(System.Type,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypeSelectorIncludes,System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute"/> class with the specified base <see cref="T:System.Type"/> object and configuration <see cref="T:System.Type"/>.
|
</summary>
|
<param name="typeSelectorIncludes">
|
One of the <see cref="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.typeSelectorIncludes"/> values.
|
</param>
|
<param name="baseType">The base <see cref="T:System.Type"/> to filter.</param>
|
<param name="configurationType">The configuration object <see cref="T:System.Type"/>.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.TypeSelectorIncludes">
|
<summary>
|
Gets the includes for the type selector.
|
</summary>
|
<value>
|
The includes for the type selector.
|
</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.BaseType">
|
<summary>
|
Gets the <see cref="T:System.Type"/> to filter selections.
|
</summary>
|
<value>
|
The <see cref="T:System.Type"/> to filter selections.
|
</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.BaseTypeAttribute.ConfigurationType">
|
<summary>
|
Gets the configuration object <see cref="T:System.Type"/>.
|
</summary>
|
<value>
|
The configuration object <see cref="T:System.Type"/>.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CloneableConfigurationElementTypeAttribute">
|
<summary>
|
Attribute class used to associate a <see cref="T:System.Configuration.ConfigurationElement"/> class with an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICloneableConfigurationElement"/> implementation.
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICloneableConfigurationElement"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CloneableConfigurationElementTypeAttribute.#ctor(System.Type)">
|
<summary>
|
Creates a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CloneableConfigurationElementTypeAttribute"/> class.
|
</summary>
|
<param name="cloneableConfigurationElementType">The type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICloneableConfigurationElement"/> that should be associated with the target <see cref="T:System.Configuration.ConfigurationElement"/> class.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CloneableConfigurationElementTypeAttribute.CloneableConfigurationElementType">
|
<summary>
|
Gets the type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICloneableConfigurationElement"/> that should be associated with the target <see cref="T:System.Configuration.ConfigurationElement"/> class.
|
</summary>
|
<value>
|
The type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICloneableConfigurationElement"/> that should be associated with the target <see cref="T:System.Configuration.ConfigurationElement"/> class.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesigntimeDefaultAttribute">
|
<summary>
|
Specifies a default value for a configuration property.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesigntimeDefaultAttribute.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesigntimeDefaultAttribute"/> class.
|
</summary>
|
<remarks>
|
The default value is a string representation which will be converted using <see cref="P:System.Globalization.CultureInfo.InvariantCulture"/>.
|
</remarks>
|
<param name="bindableDefaultValue">The string representation of the default value.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesigntimeDefaultAttribute.BindableDefaultValue">
|
<summary>
|
Gets the string reprentation of the default value.
|
</summary>
|
<value>
|
The string reprentation of the default value.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ConfigurationSourcesDesignTime">
|
<summary>
|
This class supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ConfigurationSourcesDesignTime.ViewModelTypeNames">
|
<summary>
|
This class supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ConfigurationSourcesDesignTime.ViewModelTypeNames.ConfigurationSourcesSectionViewModel">
|
<summary>
|
This field supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ConfigurationSourcesDesignTime.ViewModelTypeNames.ConfigurationSourceSectionViewModel">
|
<summary>
|
This field supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ConfigurationSourcesDesignTime.CommandTypeNames">
|
<summary>
|
This class supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ConfigurationSourcesDesignTime.CommandTypeNames.AddConfigurationSourcesBlockCommand">
|
<summary>
|
This field supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ConfigurationSourcesDesignTime.CommandTypeNames.ConfigurationSourceElementDeleteCommand">
|
<summary>
|
This field supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource">
|
<summary>
|
configuration source to support design-time configuration of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource"/>
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource">
|
<summary>
|
Represents a configuration source that retrieves configuration information from an arbitrary file.
|
</summary>
|
<remarks>
|
This configuration source uses a <see cref="T:System.Configuration.Configuration"/> object to deserialize
|
configuration, so the configuration file must be a valid .NET Framework configuration file.
|
</remarks>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource">
|
<summary>
|
Represents the implementation details for file-based configuration sources.
|
</summary>
|
<remarks>
|
This implementation deals with setting up the watcher over the configuration files to detect changes and update
|
the configuration representation. It also manages the change notification features provided by the file based
|
configuration sources.
|
</remarks>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceTest">
|
<summary>
|
This interface supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Augmented version of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> interface intended to be used by unit tests.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource">
|
<summary>
|
Represents a source for getting configuration information.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.GetSection(System.String)">
|
<summary>
|
Retrieves the specified <see cref="T:System.Configuration.ConfigurationSection"/>.
|
</summary>
|
<param name="sectionName">The name of the section to be retrieved.</param>
|
<returns>The specified <see cref="T:System.Configuration.ConfigurationSection"/>, or <see langword="null"/> (<b>Nothing</b> in Visual Basic)
|
if a section by that name is not found.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the configuration source and saves the configuration source.
|
</summary>
|
<remarks>
|
If a configuration section with the specified name already exists it will be replaced.
|
</remarks>
|
<param name="sectionName">The name by which the <paramref name="configurationSection"/> should be added.</param>
|
<param name="configurationSection">The configuration section to add.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Remove(System.String)">
|
<summary>
|
Removes a <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration source.
|
</summary>
|
<param name="sectionName">The name of the section to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.AddSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Adds a handler to be called when changes to the section named <paramref name="sectionName"/> are detected.
|
</summary>
|
<param name="sectionName">The name of the section to watch for.</param>
|
<param name="handler">The handler for the change event to add.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.RemoveSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Removes a handler to be called when changes to section <code>sectionName</code> are detected.
|
</summary>
|
<param name="sectionName">The name of the watched section.</param>
|
<param name="handler">The handler for the change event to remove.</param>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.SourceChanged">
|
<summary>
|
Event raised when any section in this configuration source changes.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceTest.ConfigSourceChanged(System.String)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceTest.ExternalConfigSourceChanged(System.String)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceTest.ConfigSourceWatcherMappings">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceTest.WatchedConfigSources">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceTest.WatchedSections">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.NullConfigSource">
|
<summary>
|
ConfigSource value for sections that existed in configuration but were later removed.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.#ctor(System.String,System.Boolean,System.Int32)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource"/> class.
|
</summary>
|
<param name="configurationFilepath">The path for the main configuration file.</param>
|
<param name="refresh"><b>true</b>if runtime changes should be refreshed, <b>false</b> otherwise.</param>
|
<param name="refreshInterval">The poll interval in milliseconds.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.GetSection(System.String)">
|
<summary>
|
Retrieves the specified <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration file, and starts watching for
|
its changes if not watching already.
|
</summary>
|
<param name="sectionName">The section name.</param>
|
<returns>The section, or <see langword="null"/> if it doesn't exist.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.AddSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Adds a handler to be called when changes to section <code>sectionName</code> are detected.
|
</summary>
|
<param name="sectionName">The name of the section to watch for.</param>
|
<param name="handler">The handler.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.RemoveSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Remove a handler to be called when changes to section <code>sectionName</code> are detected.
|
</summary>
|
<param name="sectionName">The name of the section to watch for.</param>
|
<param name="handler">The handler.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the configuration and saves the configuration source.
|
</summary>
|
<remarks>
|
If a configuration section with the specified name already exists it will be replaced.
|
If a configuration section was retrieved from an instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource"/>, a <see cref="T:System.InvalidOperationException"/> will be thrown.
|
</remarks>
|
<param name="sectionName">The name by which the <paramref name="configurationSection"/> should be added.</param>
|
<param name="configurationSection">The configuration section to add.</param>
|
<exception cref="T:System.InvalidOperationException">The configuration section was retrieved from an instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource"/> or <see cref="N:Microsoft.Practices.EnterpriseLibrary.Common.Configuration"/> and cannot be added to the current source.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.DoAdd(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
When implemented in a derived class, adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the configuration and saves the configuration source.
|
</summary>
|
<remarks>
|
If a configuration section with the specified name already exists it should be replaced.
|
</remarks>
|
<param name="sectionName">The name by which the <paramref name="configurationSection"/> should be added.</param>
|
<param name="configurationSection">The configuration section to add.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.Remove(System.String)">
|
<summary>
|
Removes a <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration and saves the configuration source.
|
</summary>
|
<param name="sectionName">The name of the section to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.DoRemove(System.String)">
|
<summary>
|
When implemented in a derived class, removes a <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration and saves the configuration source.
|
</summary>
|
<param name="sectionName">The name of the section to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.ConfigSourceChanged(System.String)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
<param name="configSource">The name of the updated configuration source.</param>
|
<devdoc>
|
Only needs to deal with concurrency to get the current sections and to update the watchers.
|
|
Rationale:
|
- Sections' are only added or updated.
|
- For this notification, all sections in the configuration file must be updated, and sections in external
|
files must be refreshed only if the config source changed.
|
- why not check after the original set of sections is retrieved?
|
-- Sections might have been added to the listener set after the original set is retrieved, but...
|
-- If they were added after the original set was retrieved, then they are up to date.
|
--- For this to happen, they couldn't have been read before the o.s., otherwise they would be a listener for them.
|
--- So, the retrieved information must be fresh (checked this with a test).
|
-- What about other changes?
|
--- Erased sections: only tested in the configuration file watching thread, because the meta configuration
|
is kept in the configuration file.
|
---- Even if the external file an external is deleted because of the deletion, and this change is processed
|
before the configuration file change, the refresh for the external section will refresh all the sections for the file and
|
notify a change, without need for checking the change. The change would later be picked up by the configuration file watcher
|
which will notify again. This shouldn't be a problem.
|
--- External sections with changed sources. If they existed before, they must have been in the configuration file and there
|
was an entry in the bookeeping data structures.
|
- Concurrent updates for sections values should be handled by the system.config fx
|
</devdoc>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.Dispose(System.Boolean)">
|
<summary>
|
Releases the resources used by the change watchers.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.Dispose">
|
<summary>
|
Releases the resources used by the change watchers.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.NotifyUpdatedSections(System.Collections.Generic.IEnumerable{System.String})">
|
<summary/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.DoGetSection(System.String)">
|
<summary>
|
Retrieves the specified <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration file.
|
</summary>
|
<param name="sectionName">The section name.</param>
|
<returns>The section, or <see langword="null"/> if it doesn't exist.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.OnSourceChanged(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs)">
|
<summary>
|
Raises the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.SourceChanged"/> event.
|
</summary>
|
<param name="configurationSourceChangedEventArgs">The argument for the raised event.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.RefreshAndValidateSections(System.Collections.Generic.IDictionary{System.String,System.String},System.Collections.Generic.IDictionary{System.String,System.String},System.Collections.Generic.ICollection{System.String}@,System.Collections.Generic.IDictionary{System.String,System.String}@)">
|
<summary>
|
Refreshes the configuration sections from the main configuration file and determines which sections have suffered notifications
|
and should be notified to registered handlers.
|
</summary>
|
<param name="localSectionsToRefresh">A dictionary with the configuration sections residing in the main configuration file that must be refreshed.</param>
|
<param name="externalSectionsToRefresh">A dictionary with the configuration sections residing in external files that must be refreshed.</param>
|
<param name="sectionsToNotify">A new collection with the names of the sections that suffered changes and should be notified.</param>
|
<param name="sectionsWithChangedConfigSource">A new dictionary with the names and file names of the sections that have changed their location.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.RefreshExternalSections(System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Refreshes the configuration sections from an external configuration file.
|
</summary>
|
<param name="sectionsToRefresh">A collection with the names of the sections that suffered changes and should be refreshed.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.ValidateArgumentsAndFileExists(System.String,System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Validates the parameters required to save a configuration section.
|
</summary>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.SourceChanged">
|
<summary>
|
Event raised when any section in this configuration source has changed.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource.ConfigurationFilePath">
|
<summary>
|
Gets the path of the configuration file for the configuration source.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IProtectedConfigurationSource">
|
<summary>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IProtectedConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection,System.String)">
|
<summary>
|
</summary>
|
<param name="sectionName"></param>
|
<param name="configurationSection"></param>
|
<param name="protectionProviderName"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource"/> class.
|
</summary>
|
<param name="configurationFilepath">The configuration file path. The path can be absolute or relative.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.#ctor(System.String,System.Boolean)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource"/> class that will refresh changes
|
according to the value of the <paramref name="refresh"/> parameter.
|
</summary>
|
<param name="configurationFilepath">The configuration file path. The path can be absolute or relative.</param>
|
<param name="refresh"><see langword="true"/> if changes to the configuration file should be notified.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.#ctor(System.String,System.Boolean,System.Int32)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource"/> that will refresh changes
|
according to the value of the <paramref name="refresh"/> parameter, polling every
|
<paramref name="refreshInterval"/> milliseconds.
|
</summary>
|
<param name="configurationFilepath">The configuration file path. The path can be absolute or relative.</param>
|
<param name="refresh"><see langword="true"/> if changes to the configuration file should be notified.</param>
|
<param name="refreshInterval">The poll interval in milliseconds.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.DoAdd(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the configuration and saves the configuration source.
|
</summary>
|
<remarks>
|
If a configuration section with the specified name already exists it will be replaced.
|
</remarks>
|
<param name="sectionName">The name by which the <paramref name="configurationSection"/> should be added.</param>
|
<param name="configurationSection">The configuration section to add.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.DoRemove(System.String)">
|
<summary>
|
Removes a <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration and saves the configuration source.
|
</summary>
|
<param name="sectionName">The name of the section to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection,System.String)">
|
<summary>
|
Adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the configuration and saves the configuration source using encryption.
|
</summary>
|
<remarks>
|
If a configuration section with the specified name already exists it will be replaced.<br/>
|
If a configuration section was retrieved from an instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource"/>, a <see cref="T:System.InvalidOperationException"/> will be thrown.
|
</remarks>
|
<param name="sectionName">The name by which the <paramref name="configurationSection"/> should be added.</param>
|
<param name="configurationSection">The configuration section to add.</param>
|
<param name="protectionProviderName">The name of the protection provider to use when encrypting the section.</param>
|
<exception cref="T:System.InvalidOperationException">The configuration section was retrieved from an instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileBasedConfigurationSource"/> or <see cref="N:Microsoft.Practices.EnterpriseLibrary.Common.Configuration"/> and cannot be added to the current source.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.Save(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Adds or replaces <paramref name="configurationSection"/> under name <paramref name="section"/> in the configuration and saves the configuration file.
|
</summary>
|
<param name="section">The name for the section.</param>
|
<param name="configurationSection">The configuration section to add or replace.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.Save(System.String,System.Configuration.ConfigurationSection,System.String)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Adds or replaces <paramref name="configurationSection"/> under name <paramref name="section"/> in the configuration
|
file and saves the configuration file using encryption.
|
</summary>
|
<param name="section">The name for the section.</param>
|
<param name="configurationSection">The configuration section to add or replace.</param>
|
<param name="protectionProvider">The name of the protection provider to use when encrypting the section.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.DoGetSection(System.String)">
|
<summary>
|
Retrieves the specified <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration file.
|
</summary>
|
<param name="sectionName">The section name.</param>
|
<returns>The section, or <see langword="null"/> if it doesn't exist.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.RefreshAndValidateSections(System.Collections.Generic.IDictionary{System.String,System.String},System.Collections.Generic.IDictionary{System.String,System.String},System.Collections.Generic.ICollection{System.String}@,System.Collections.Generic.IDictionary{System.String,System.String}@)">
|
<summary>
|
Refreshes the configuration sections from the main configuration file and determines which sections have
|
suffered notifications and should be notified to registered handlers.
|
</summary>
|
<param name="localSectionsToRefresh">A dictionary with the configuration sections residing in the main
|
configuration file that must be refreshed.</param>
|
<param name="externalSectionsToRefresh">A dictionary with the configuration sections residing in external
|
files that must be refreshed.</param>
|
<param name="sectionsToNotify">A new collection with the names of the sections that suffered changes and
|
should be notified.</param>
|
<param name="sectionsWithChangedConfigSource">A new dictionary with the names and file names of the sections
|
that have changed their location.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource.RefreshExternalSections(System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Refreshes the configuration sections from an external configuration file.
|
</summary>
|
<param name="sectionsToRefresh">A collection with the names of the sections that suffered changes and should
|
be refreshed.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource">
|
<summary>
|
Supports Enterprise Library design-time by providing ability to
|
retrieve, add, and remove sections.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource.GetLocalSection(System.String)">
|
<summary>
|
Retrieves a local section from the configuration source.
|
</summary>
|
<param name="sectionName"></param>
|
<returns>The configuration section or null if it does not contain the section.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource.AddLocalSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a local section to the configuration source.
|
</summary>
|
<param name="sectionName"></param>
|
<param name="section"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource.RemoveLocalSection(System.String)">
|
<summary>
|
Removes a local section from the configuration source.
|
</summary>
|
<param name="sectionName"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource"/> based on file path.
|
</summary>
|
<param name="configurationFilePath"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource.GetLocalSection(System.String)">
|
<summary>
|
Retrieves a local section from the configuration source.
|
</summary>
|
<param name="sectionName"></param>
|
<returns>The configuration section or null if it does not contain the section.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource.AddLocalSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a local section to the configuration source.
|
</summary>
|
<param name="sectionName"></param>
|
<param name="section"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource.RemoveLocalSection(System.String)">
|
<summary>
|
Removes a local section from the configuration source.
|
</summary>
|
<param name="sectionName"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource.CreateDesignSource(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource,System.String)">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource"/> based on <paramref name="rootSource"/> and <paramref name="filePath"/>.
|
</summary>
|
<param name="rootSource">The source that was used to open the main conifguration file.</param>
|
<param name="filePath">An absolute of relative path to the file to which the source should be created.</param>
|
<returns>A new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource"/>.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignConfigurationSource.ConfigurationFilePath">
|
<summary>
|
Gets the path of the configuration file for the configuration source.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.MergeableConfigurationCollectionTypeAttribute">
|
<summary>
|
Attribute class used to associate a <see cref="T:System.Configuration.ConfigurationElementCollection"/> class with an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection"/> implementation.
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.MergeableConfigurationCollectionTypeAttribute.#ctor(System.Type)">
|
<summary>
|
Creates a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.MergeableConfigurationCollectionTypeAttribute"/> class.
|
</summary>
|
<param name="mergeableConfigurationCollectionType">The type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection"/> that should be associated with the target <see cref="T:System.Configuration.ConfigurationElementCollection"/> class.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.MergeableConfigurationCollectionTypeAttribute.MergeableConfigurationCollectionType">
|
<summary>
|
Gets the type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection"/> that should be associated with the target <see cref="T:System.Configuration.ConfigurationElementCollection"/> class.
|
</summary>
|
<value>
|
The type of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection"/> that should be associated with the target <see cref="T:System.Configuration.ConfigurationElementCollection"/> class.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.NamePropertyAttribute">
|
<summary>
|
Attribute class that allows to specify a property that should be used as the Element View Model's name.<br/>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.NamePropertyAttribute.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.NamePropertyAttribute"/> class.
|
</summary>
|
<param name="propertyName">The reflection name of the property that will be used as the Element View Model's name.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.NamePropertyAttribute.PropertyName">
|
<summary>
|
Gets the reflection name of the property that will be used as the Element View Model's name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.NamePropertyAttribute.NamePropertyDisplayFormat">
|
<summary>
|
Gets the Display Format that will be used to display the name property.<br/>
|
The Display Format should be a Format-string with 1 argument:<Br/>
|
The token '{0}' will be replaced with the Name Properties value.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.OmitCustomAttributesPropertyAttribute">
|
<summary>
|
This attribute supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.PromoteCommandsAttribute">
|
<summary>
|
Attribute class that can be oved to offer a properties add-commands to the containing Element View Model.<br/>
|
This can be usefull for properties that contain a collection of providers, of which the Element Collection View Model is not shown in the UI (User Interface).
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EditorWithReadOnlyTextAttribute">
|
<summary>
|
Attribute that instructs the designtime to make the textbox for a property readonly. <br/>
|
This property can is used together with an <see cref="T:System.ComponentModel.EditorAttribute"/>, in which the created text box is readonly,
|
though the property can be edited by the editor.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EditorWithReadOnlyTextAttribute.#ctor(System.Boolean)">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EditorWithReadOnlyTextAttribute"/>.
|
</summary>
|
<param name="readonlyText"><see langword="true"/> if the textbox created for this property should be readonly, otherwise <see langword="false"/>.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EditorWithReadOnlyTextAttribute.ReadonlyText">
|
<summary>
|
Returns <see langword="true"/> if the textbox created for this property should be readonly, otherwise <see langword="false"/>.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.RegisterAsMetadataTypeAttribute">
|
<summary>
|
Registers a class as a metadata body class for another class.
|
</summary>
|
<remarks>
|
When applying metadata attributes to classes, the target class might not always allow itself to be anotated. <br/>
|
This attribute can be used to nominate another class to contain the metadata attributes. <br/>
|
The metadata type should follow the same structure as the target type and its members cab be decorated with the metadata attributes.<br/>
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.RegisterAsMetadataTypeAttribute.#ctor(System.Type)">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.RegisterAsMetadataTypeAttribute"/>.
|
</summary>
|
<param name="targetType">The type for which this class should contain metadata attributes.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.RegisterAsMetadataTypeAttribute.TargetType">
|
<summary>
|
Gets the type for which this class should contain metadata attributes.
|
</summary>
|
<value>
|
The type for which this class should contain metadata attributes.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypePickingCommandAttribute">
|
<summary>
|
Attribute class that is used to add a custom add command for a Element View Model.<br/>
|
The Type Picking Command displays a type picker prior to adding the target element and can use its result to initialize the added element.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypePickingCommandAttribute.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypePickingCommandAttribute"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypePickingCommandAttribute.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypePickingCommandAttribute"/> class.
|
</summary>
|
<param name="property">The clr-name of the property to which the selected type should be assigned. This property is expected to be of type <see cref="T:System.String"/>.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypePickingCommandAttribute.Property">
|
<summary>
|
Gets the clr-name of the property to which the selected type should be assigned.
|
</summary>
|
<value>
|
The clr-name of the property to which the selected type should be assigned.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandReplacement">
|
<summary>
|
Specifies whether a command replaces a default command.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandReplacement.DefaultAddCommandReplacement">
|
<summary>
|
Specifies that the command should be used to replace the default add command.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandReplacement.DefaultDeleteCommandReplacement">
|
<summary>
|
Specifies that the command should be used to replace the default delete command.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandReplacement.NoCommand">
|
<summary>
|
Specifies that the command should not be used to replace any default command.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement">
|
<summary>
|
Specifies the placement of a command. This can be either a top level menu, e.g.: <see cref="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.FileMenu"/> or <see cref="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.BlocksMenu"/> or
|
a context menu, e.g.: <see cref="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.ContextAdd"/>, <see cref="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.ContextCustom"/>.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.FileMenu">
|
<summary>
|
Specifies placement of the command in the top level file menu.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.BlocksMenu">
|
<summary>
|
Specifies placement of the command in the top level blocks menu.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.WizardMenu">
|
<summary>
|
Specifies placement of the command in the top level wizards menu.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.ContextAdd">
|
<summary>
|
Specifies placement of the command in the contextual add menu for an configuration element.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.ContextCustom">
|
<summary>
|
Specifies placement of the command in the custom commands menu for an configuration element.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommandPlacement.ContextDelete">
|
<summary>
|
Specifies placement of the command in the delete commands menu for an configuration element.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignTimeReadOnlyAttribute">
|
<summary>
|
Determines if the corresponding property is read-only at designtime.
|
</summary>
|
<remarks>
|
This attribute is used to mark properties that should be presented as read-only, but underlying code may change the value on.
|
<seealso cref="T:System.ComponentModel.ReadOnlyAttribute"/></remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignTimeReadOnlyAttribute.#ctor(System.Boolean)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignTimeReadOnlyAttribute"/> class.
|
</summary>
|
<param name="readOnly"><see langword="true"/> if the property should be read-only at designtime.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.DesignTimeReadOnlyAttribute.ReadOnly">
|
<summary>
|
Determines if the property is read-only by design-time.
|
Returns <see langword="true" /> if the property is read-only at design-time
|
and <see langword="false" /> otherwise.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EnvironmentalOverridesAttribute">
|
<summary>
|
Attribute class used to indicate whether a property can be overwritten per environment.<br/>
|
The default behavior is that any property can be overwritten.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EnvironmentalOverridesAttribute.#ctor(System.Boolean)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EnvironmentalOverridesAttribute"/> class.
|
</summary>
|
<param name="canOverride"><see langword="true"/> to specify the property can be overwritten per environment. Otherwise <see langword="false"/>.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EnvironmentalOverridesAttribute.CanOverride">
|
<summary>
|
<see langword="true"/> if the property can be overwritten per environment. Otherwise <see langword="false"/>.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EnvironmentalOverridesAttribute.CustomOverridesPropertyType">
|
<summary>
|
Specifies a custom property type for the overrides property.<br/>
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.EnvironmentalOverridesAttribute.StorageConverterType">
|
<summary>
|
Specifies a <see cref="T:System.ComponentModel.TypeConverter"/> that should be used to serialize the overriden value to the delta configuration file. <br/>
|
This can be used to overwrite a property that doesnt implement <see cref="T:System.IConvertible"/>. <br/>
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.FilteredFileNameEditorAttribute">
|
<summary>
|
Specifies additional metadata for the FilteredFileNameEditor editor.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.FilteredFileNameEditorAttribute.#ctor(System.Type,System.String)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.FilteredFileNameEditorAttribute"/> class with the <see cref="T:System.Type"/> containing the resources and the resource key.
|
</summary>
|
<param name="resourceType">The <see cref="T:System.Type"/> containing the resources.</param>
|
<param name="resourceKey">The resource key.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.FilteredFileNameEditorAttribute.Filter">
|
<summary>
|
Gets the filter for the dialog.
|
</summary>
|
<value>
|
The filter for the dialog.
|
</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.FilteredFileNameEditorAttribute.CheckFileExists">
|
<summary>
|
Gets or sets whether the Open File Dialog should only allow existing files to be selected.
|
</summary>
|
<value>
|
<see langword="true"/> if the Open File Dialog is used to open existing files. Otherwise <see langword="false"/>.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceCategoryAttribute">
|
<summary>
|
Represents a localized <see cref="T:System.ComponentModel.CategoryAttribute"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceCategoryAttribute.#ctor(System.Type,System.String)">
|
<summary>
|
Initialize a new instance of the <see cref="T:System.SRCategoryAttribute"/> class with the <see cref="T:System.Type"/> containing the resources and the resource name.
|
</summary>
|
<param name="category">The resources string name.</param>
|
<param name="resourceType">The <see cref="T:System.Type"/> containing the resource strings.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceCategoryAttribute.GetLocalizedString(System.String)">
|
<summary>
|
Gets the localized string based on the key.
|
</summary>
|
<param name="value">The key to the string resources.</param>
|
<returns>The localized string.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceCategoryAttribute.ResourceType">
|
<summary>
|
Gets the type that contains the resources.
|
</summary>
|
<value>
|
The type that contains the resources.
|
</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceCategoryAttribute.General">
|
<summary>
|
Returns a localized <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceCategoryAttribute"/> for the General category.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime">
|
<summary>
|
Class that contains common type names and metadata used by the designtime.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.CommandTypeNames">
|
<summary>
|
Class that contains common command types used by the designtime.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.CommandTypeNames.AddSatelliteProviderCommand">
|
<summary>
|
Type name of the AddSatelliteProviderCommand class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.CommandTypeNames.AddApplicationBlockCommand">
|
<summary>
|
Type name of the AddApplicationBlockCommand class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.CommandTypeNames.AddProviderUsingTypePickerCommand">
|
<summary>
|
Type name of the TypePickingCollectionElementAddCommand class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.CommandTypeNames.ExportAdmTemplateCommand">
|
<summary>
|
Type name of the ExportAdmTemplateCommand class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.CommandTypeNames.HiddenCommand">
|
<summary>
|
Type name of the HiddenCommand class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.CommandTypeNames.AddInstrumentationApplicationBlockCommand">
|
<summary>
|
Type name of the AddInstrumentationBlockCommand class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.CommandTypeNames.WizardCommand">
|
<summary>
|
Type name of the WizardCommand class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes">
|
<summary>
|
Class that contains common editor types used by the designtime.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.DatePickerEditor">
|
<summary>
|
Type name of the DatePickerEditor class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.CollectionEditor">
|
<summary>
|
Type name of the ElementCollectionEditor, declared class in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.UITypeEditor">
|
<summary>
|
Type name of the UITypeEditor class, declared in the System.Drawing Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.TypeSelector">
|
<summary>
|
Type name of the TypeSelectionEditor, declared class in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.FilteredFilePath">
|
<summary>
|
Type name of the FilteredFileNameEditor, declared class in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.FrameworkElement">
|
<summary>
|
Type name of the FrameworkElement, declared class in the PresentationFramework Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.MultilineText">
|
<summary>
|
Type name of the MultilineTextEditor class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.PopupTextEditor">
|
<summary>
|
Type name of the PopupTextEditor class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.Flags">
|
<summary>
|
Type name of the FlagsEditor class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.RegexTypeEditor">
|
<summary>
|
Type name of the RegexTypeEditor class, declared in the System.Design Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.ConnectionStringEditor">
|
<summary>
|
Type name of the ConnectionStringEditor class, declared in the System.Design Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.TemplateEditor">
|
<summary>
|
Type name of the TemplateEditor class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.EditorTypes.OverridesEditor">
|
<summary>
|
Type name of the IEnvironmentalOverridesEditor interface, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ViewModelTypeNames">
|
<summary>
|
Class that contains common view model types used by the designtime.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ViewModelTypeNames.TypeNameProperty">
|
<summary>
|
Type name of the TypeNameProperty class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ViewModelTypeNames.ConfigurationPropertyViewModel">
|
<summary>
|
Type name of the ConfigurationProperty class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ViewModelTypeNames.SectionViewModel">
|
<summary>
|
Type name of the SectionViewModel class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ViewModelTypeNames.InstrumentationViewModel">
|
<summary>
|
Type name of the InstrumentationViewModel class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ViewModelTypeNames.ManageableConfigurationSourceViewModel">
|
<summary>
|
Type name of the ManageableConfigurationSourceViewModel class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ViewModelTypeNames.CollectionEditorContainedElementProperty">
|
<summary>
|
Type name of the CollectionEditorContainedElementProperty class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ViewModelTypeNames.CollectionEditorContainedElementReferenceProperty">
|
<summary>
|
Type name of the CollectionEditorContainedElementReferenceProperty class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ViewModelTypeNames.RedirectedSectionSourceProperty">
|
<summary>
|
Type name of the RedirectedSectionSourceProperty class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ConverterTypeNames">
|
<summary>
|
Class that contains common converter types used by the designtime runtime.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ConverterTypeNames.RedirectedSectionNameConverter">
|
<summary>
|
Type name of the RedirectedSectionNameConverter class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.MetadataTypes">
|
<summary>
|
Class that contains common metadata classes used by the designtime.<br/>
|
This class supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.MetadataTypes.RedirectedSectionElementMetadata">
|
<summary>This class supports the Enterprise Library infrastructure and is not intended to be used directly from your code.</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.MetadataTypes.RedirectedSectionElementMetadata.Name">
|
<summary>This property supports the Enterprise Library infrastructure and is not intended to be used directly from your code.</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ValidationTypeNames">
|
<summary>
|
Class that contains common validation types used by the designtime.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ValidationTypeNames.FileWritableValidator">
|
<summary>
|
Type name of the FileWritableValidator class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ValidationTypeNames.FileValidator">
|
<summary>
|
Type name of the FilePathValidator class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ValidationTypeNames.PathExistsValidator">
|
<summary>
|
Type name of the FilePathExistsValidator class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ValidationTypeNames.RequiredFieldValidator">
|
<summary>
|
Type name of the RequiredFieldValidator class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ValidationTypeNames.TypeValidator">
|
<summary>
|
Type name of the TypeValidator class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ValidationTypeNames.SelectedSourceValidator">
|
<summary>
|
Type name of the SelectedSourceValidator class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.ValidationTypeNames.NameValueCollectionValidator">
|
<summary>
|
Type name of the NameValueCollectionValidator class, declared in the Configuration.DesignTime Assembly.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.SectionType">
|
<summary>
|
Type names for well known Enterprise Library <see cref="T:System.Configuration.ConfigurationSection"/> elements.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.SectionType.LoggingSettings">
|
<summary>
|
Type name for the LoggingSettings section.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.SectionType.DatabaseSettings">
|
<summary>
|
Type name for the DatabaseSettings section.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.CommonDesignTime.SectionType.ExceptionHandlingSettings">
|
<summary>
|
Type name for the ExceptionHandlingSettings section.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute">
|
<summary>
|
Attribute class used to indicate that the property is a reference to provider. <br/>
|
Reference properties will show an editable dropdown that allows the referred element to be selected.<br/>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute"/> class.
|
</summary>
|
<param name="targetTypeName">The configuration type name of the provider that used as a reference.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute.#ctor(System.String,System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute"/> class.
|
</summary>
|
<param name="scopeTypeName">The name of a configuration type that contains the references.</param>
|
<param name="targetTypeName">The configuration type name of the provider that used as a reference.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute.#ctor(System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute"/> class.
|
</summary>
|
<param name="targetType">The configuration type of the provider that used as a reference.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute.#ctor(System.Type,System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute"/> class.
|
</summary>
|
<param name="scopeType">The configuration type that contains the references.</param>
|
<param name="targetType">The configuration type of the provider that used as a reference.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute.ScopeType">
|
<summary>
|
Gets the configuration type that contains the references.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute.ScopeIsDeclaringElement">
|
<summary>
|
Gets or sets a boolean indicating whether only providers can be used that are contained in the current Element View Model.
|
</summary>
|
<value>
|
<see langword="true"/> if only providers can be used that are contained in the current Element View Model. Otherwise <see langword="false"/>.
|
</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ReferenceAttribute.TargetType">
|
<summary>
|
Gets the configuration type of the provider that used as a reference.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDescriptionAttribute">
|
<summary>
|
A customized version of <see cref="T:System.ComponentModel.DescriptionAttribute"/> that can
|
load the string from assembly resources instead of just a hard-wired
|
string.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDescriptionAttribute.#ctor">
|
<summary>
|
Create a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDescriptionAttribute"/> where
|
the type and name of the resource is set via properties.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDescriptionAttribute.#ctor(System.Type,System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDescriptionAttribute"/> class.
|
</summary>
|
<param name="resourceType">Type used to locate the assembly containing the resources.</param>
|
<param name="resourceName">Name of the entry in the resource table.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDescriptionAttribute.ResourceType">
|
<summary>
|
A type contained in the assembly we want to get our display name from.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDescriptionAttribute.ResourceName">
|
<summary>
|
Name of the string resource containing our display name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDescriptionAttribute.Description">
|
<summary>
|
Gets the description for a property, event, or public void method that takes no arguments stored in this attribute.
|
</summary>
|
<returns>
|
The display name.
|
</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDisplayNameAttribute">
|
<summary>
|
A customized version of <see cref="T:System.ComponentModel.DisplayNameAttribute"/> that can
|
load the string from assembly resources instead of just a hard-wired
|
string.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDisplayNameAttribute.#ctor">
|
<summary>
|
Create a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDisplayNameAttribute"/> where
|
the type and name of the resource is set via properties.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDisplayNameAttribute.#ctor(System.Type,System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDisplayNameAttribute"/> class.
|
</summary>
|
<param name="resourceType">Type used to locate the assembly containing the resources.</param>
|
<param name="resourceName">Name of the entry in the resource table.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDisplayNameAttribute.ResourceType">
|
<summary>
|
A type contained in the assembly we want to get our display name from.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDisplayNameAttribute.ResourceName">
|
<summary>
|
Name of the string resource containing our display name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ResourceDisplayNameAttribute.DisplayName">
|
<summary>
|
Gets the display name for a property, event, or public void method that takes no arguments stored in this attribute.
|
</summary>
|
<returns>
|
The display name.
|
</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.HandlesSectionAttribute">
|
<summary>
|
Indicates that this assembly handles the <see cref="T:System.Configuration.ConfigurationSection"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.HandlesSectionAttribute.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.HandlesSectionAttribute"/> class.
|
</summary>
|
<param name="sectionName"></param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.HandlesSectionAttribute.SectionName">
|
<summary>
|
Name of the section handled by this assembly.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.HandlesSectionAttribute.ClearOnly">
|
<summary>
|
Indicates this section should be cleared during save, but there is no
|
direct handler for it.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypeSelectorIncludes">
|
<summary>
|
Provides attributes for the filter of types.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypeSelectorIncludes.None">
|
<summary>
|
No filter are applied to types.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypeSelectorIncludes.AbstractTypes">
|
<summary>
|
Inclue abstract types in the filter.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypeSelectorIncludes.Interfaces">
|
<summary>
|
Inclue interfaces in the filter.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypeSelectorIncludes.BaseType">
|
<summary>
|
Inclue base types in the filter.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypeSelectorIncludes.NonpublicTypes">
|
<summary>
|
Inclue non public types in the filter.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.TypeSelectorIncludes.All">
|
<summary>
|
Include all types in the filter.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ValidationAttribute">
|
<summary>
|
Defines the type of attribute to apply this configuration property or field.
|
</summary>
|
<remarks>
|
This attribute is applied to create validators for use in the configuration design-time.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ValidationAttribute.#ctor(System.String)">
|
<summary>
|
Creates an instance of ValidationAttribute with the validator type specified by <see cref="T:System.String"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ValidationAttribute.#ctor(System.Type)">
|
<summary>
|
Creates an instance of the ValidationAttribute with the validator type specified by <see cref="T:System.Type"/>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ValidationAttribute.CreateValidator">
|
<summary>
|
Creates a validator objects. This is expected to return a Validator type from
|
the Microsoft.Practices.EnterpriseLibrary.Configuration.Design namespace.
|
</summary>
|
<returns></returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ValidationAttribute.ValidatorType">
|
<summary>
|
Retrieves the validator <see cref="T:System.Type"/>.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ValidationAttribute.TypeId">
|
<summary>
|
When implemented in a derived class, gets a unique identifier for this <see cref="T:System.Attribute"/>.
|
</summary>
|
<returns>
|
An <see cref="T:System.Object"/> that is a unique identifier for the attribute.
|
</returns>
|
<filterpriority>2</filterpriority>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ElementValidationAttribute">
|
<summary>
|
Indicates an element level validator.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ElementValidationAttribute.#ctor(System.String)">
|
<summary>
|
Creates an instance of ElementValidationAttribute with the validator type specified by <see cref="T:System.String"/>.
|
</summary>
|
<param name="validatorTypeName"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ElementValidationAttribute.#ctor(System.Type)">
|
<summary>
|
Creates an instance of the ElementValidationAttribute with the validator type specified by <see cref="T:System.Type"/>
|
</summary>
|
<param name="validatorType"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ElementValidationAttribute.CreateValidator">
|
<summary>
|
Creates a validator objects. This is expected to return a Validator type from
|
the Microsoft.Practices.EnterpriseLibrary.Configuration.Design namespace.
|
</summary>
|
<returns></returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ElementValidationAttribute.ValidatorType">
|
<summary>
|
Retrieves the validator <see cref="T:System.Type"/>.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.Validation.ElementValidationAttribute.TypeId">
|
<summary>
|
When implemented in a derived class, gets a unique identifier for this <see cref="T:System.Attribute"/>.
|
</summary>
|
<returns>
|
An <see cref="T:System.Object"/> that is a unique identifier for the attribute.
|
</returns>
|
<filterpriority>2</filterpriority>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ViewModelAttribute">
|
<summary>
|
Attribute class used to specify a specific View Model derivement or visual representation to be used on the target element.
|
</summary>
|
<remarks>
|
|
<para>The View Model Type should derive from the ElementViewModel or Property class in the Configuration.Design assembly. <br/>
|
As this attribute can be applied to the configuration directly and we dont want to force a dependency on the Configuration.Design assembly <br/>
|
You can specify the View Model Type in a loosy coupled fashion, passing a qualified name of the type.</para>
|
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ViewModelAttribute.#ctor(System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ViewModelAttribute"/> class.
|
</summary>
|
<param name="modelType">The type of the View Model that should be used for the annotated element.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ViewModelAttribute.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ViewModelAttribute"/> class.
|
</summary>
|
<param name="modelTypeName">The type name of the View Model that should be used for the annotated element.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.ViewModelAttribute.ModelType">
|
<summary>
|
Gets the View Model Type that should be used to bind the annotated element to its view.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.WizardCommandAttribute">
|
<summary>
|
Marks the annotated class as a configuration wizard that can be found
|
by the configuration design time tools.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.WizardCommandAttribute.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.WizardCommandAttribute"/>
|
with the default wizard command model type specified.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.WizardCommandAttribute.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.WizardCommandAttribute"/>
|
with the command model type specified as a string.
|
</summary>
|
<param name="commandModelTypeName"></param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.WizardCommandAttribute.#ctor(System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.WizardCommandAttribute"/> with
|
the command model type specified by <see cref="T:System.Type"/>.
|
</summary>
|
<param name="commandModelType"></param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.WizardCommandAttribute.WizardType">
|
<summary>
|
The type of the wizard to instantiate must derive from WizardModel or will result on an error at runtime.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.WizardCommandAttribute.WizardTypeName">
|
<summary>
|
The name of the type of the wizard to instantiate.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnumConverterWithExclusiveStandardValues`1">
|
<summary>
|
Type converter used to work around enums with enums wrongly marked as "flags".
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnumConverterWithExclusiveStandardValues`1.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnumConverterWithExclusiveStandardValues`1"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnumConverterWithExclusiveStandardValues`1.GetStandardValuesExclusive(System.ComponentModel.ITypeDescriptorContext)">
|
<summary>
|
Indicates where the standard values are exclusive.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Fluent.IConfigureTypeRegistrations">
|
<summary>
|
Fluent interface that allows to add <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instances.
|
</summary>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Fluent.IConfigureTypeRegistrations.AddTypeRegistrationsProviderNamed(System.String)">
|
<summary>
|
Adds a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instance to configuration source builder. <br/>
|
</summary>
|
<param name="typeRegistrationsProviderName">The name of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instance.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Fluent.IConfigureTypeRegistration">
|
<summary>
|
Fluent interface used to configure a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instance.
|
</summary>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Fluent.IConfigureTypeRegistration.ForType``1">
|
<summary>
|
Specifies the type of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instance that should be used to retrieve type registrations.
|
</summary>
|
<typeparam name="TTypeRegistrationsProvider">The type of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instance that should be used to retrieve type registrations.</typeparam>
|
<returns>Fluent interface that allows to add more type registration providers.</returns>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Fluent.IConfigureTypeRegistration.ForType(System.Type)">
|
<summary>
|
Specifies the type of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instance that should be used to retrieve type registrations.
|
</summary>
|
<param name="typeRegistrationProvider">The type of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instance that should be used to retrieve type registrations.</param>
|
<returns>Fluent interface that allows to add more type registration providers.</returns>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Fluent.IConfigureTypeRegistration.ForSection(System.String)">
|
<summary>
|
Specifies the name of the configuration section that implements <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>. <br/>
|
</summary>
|
<param name="sectionName">The name of the configuration section that implements <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>. </param>
|
<returns>Fluent interface that allows to add more type registration providers.</returns>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderConfigurationSourceBuilderExtension">
|
<summary>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder"/> extensions to support creation of type registration provider settings.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderConfigurationSourceBuilderExtension.ConfigureTypeRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder)">
|
<summary>
|
Main entry point to configure a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection"/> section.
|
</summary>
|
<param name="configurationSourceBuilder">The builder interface to extend.</param>
|
<returns>A fluent interface that allows to add <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instances.</returns>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderConfigurationSourceBuilderExtension.ConfigureEmptyTypeRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder)">
|
<summary>
|
Main entry point to configure a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection"/> section with no
|
default type registrations.
|
</summary>
|
<param name="configurationSourceBuilder">The builder interface to extend.</param>
|
<returns>A fluent interface that allows to add <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> instances.</returns>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException">
|
<summary>
|
Exception class for exceptions that occur when reading configuration metadata from a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection"/>.
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> class.
|
</summary>
|
<param name="message">A message that describes why this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> exception was thrown.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException.#ctor(System.String,System.Exception)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> class.
|
</summary>
|
<param name="message">A message that describes why this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> exception was thrown.</param>
|
<param name="innerException">The inner exception that caused this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> exception to be thrown.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException.#ctor(System.String,System.Exception,System.String,System.Int32)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> class.
|
</summary>
|
<param name="message">A message that describes why this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> exception was thrown.</param>
|
<param name="innerException">The inner exception that caused this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> exception to be thrown.</param>
|
<param name="filename">The path to the configuration file that caused this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> exception to be thrown.</param>
|
<param name="line">The line number within the configuration file at which this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> exception was thrown.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceErrorsException"/> class.
|
</summary>
|
<param name="info">The object that holds the information to be serialized.</param>
|
<param name="context">The contextual information about the source or destination.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler">
|
<summary>
|
Implements hierarchical merge behavior to <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> implementations.<br/>
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceHandler"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler"/>.
|
</summary>
|
<param name="localSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> instance that should be extended.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler"/>.
|
</summary>
|
<param name="localSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> instance that should be extended.</param>
|
<param name="parentSource">An <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> instance the <paramref name="localSource"/> should be merged with.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler.Initialize">
|
<summary>
|
Performs intialization logic for this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler.DoRefresh">
|
<summary>
|
Performs re-intialization logic for this <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.HierarchicalConfigurationSourceHandler.DoCheckGetSection(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Checks whether the result of a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.GetSection(System.String)"/> should be merged.<br/>
|
If the call should be merged, performs the merge behavior and returns the resulting <see cref="T:System.Configuration.ConfigurationSection"/> intance.<br/>
|
If the call should not be merged returns <paramref name="configurationSection"/>.
|
</summary>
|
<param name="sectionName">The name of the section that was retrieved from configuration.</param>
|
<param name="configurationSection">The section that was retrieved from configuration.</param>
|
<returns>The resulting <see cref="T:System.Configuration.ConfigurationSection"/> instance.</returns>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.GetSection(System.String)"/>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICloneableConfigurationElement">
|
<summary>
|
Interface used to implement custom clone behavior for a <see cref="T:System.Configuration.ConfigurationElement"/>.
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSectionCloner"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ICloneableConfigurationElement.CreateFullClone">
|
<summary>
|
Creates a deep clone of the current <see cref="T:System.Configuration.ConfigurationElement"/> instance.
|
</summary>
|
<returns>
|
A deep clone of the current <see cref="T:System.Configuration.ConfigurationElement"/> instance.
|
</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.MergeableConfigurationCollectionFactory">
|
<summary>
|
Factory for creating <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection"/>s.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.MergeableConfigurationCollectionFactory.GetCreateMergeableCollection(System.Configuration.ConfigurationElementCollection)">
|
<summary>
|
Creates a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IMergeableConfigurationElementCollection"/> based on a ConfigurationElementCollection type.
|
</summary>
|
<param name="collection"></param>
|
<returns></returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.RedirectedSectionElement">
|
<summary>
|
Configuration element for a redirected section.<br/>
|
The <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement.Name"/> property is used to identify the redireced section, based on its section name.<br/>
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection"/>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.RedirectedSectionElement.SourceName">
|
<summary>
|
Gets the name of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceElement"/> which contains the configuration section.
|
</summary>
|
<value>
|
The name of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceElement"/> which contains the configuration section.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SectionChangedEventArgs`1">
|
<summary>
|
Event argument passed when a configuration section signals that it has changed.
|
</summary>
|
<typeparam name="TSection">Type of the configuration section class that changed.
|
</typeparam>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SectionChangedEventArgs`1.#ctor(`0,Microsoft.Practices.ServiceLocation.IServiceLocator)">
|
<summary>
|
Create an instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SectionChangedEventArgs`1"/> class
|
that wraps the given section.
|
</summary>
|
<param name="section">Configuration section that changed.</param>
|
<param name="container"><see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> that's been configured with
|
the contents of the <paramref name="section"/>.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SectionChangedEventArgs`1.Section">
|
<summary>
|
The configuration section that changed.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SectionChangedEventArgs`1.Container">
|
<summary>
|
Container that can be used to resolve newly configured objects.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection">
|
<summary>
|
Contains settings to determine which <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> to configure the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnterpriseLibraryContainer"/> with.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SerializableConfigurationSection">
|
<summary>
|
Represents a configuration section that can be serialized and deserialized to XML.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SerializableConfigurationSection.GetSchema">
|
<summary>
|
Returns the XML schema for the configuration section.
|
</summary>
|
<returns>A string with the XML schema, or <see langword="null"/> (<b>Nothing</b>
|
in Visual Basic) if there is no schema.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SerializableConfigurationSection.ReadXml(System.Xml.XmlReader)">
|
<summary>
|
Updates the configuration section with the values from an <see cref="T:System.Xml.XmlReader"/>.
|
</summary>
|
<param name="reader">The <see cref="T:System.Xml.XmlReader"/> that reads the configuration source located at the element that describes the configuration section.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SerializableConfigurationSection.WriteXml(System.Xml.XmlWriter)">
|
<summary>
|
Writes the configuration section values as an XML element to an <see cref="T:System.Xml.XmlWriter"/>.
|
</summary>
|
<param name="writer">The <see cref="T:System.Xml.XmlWriter"/> that writes to the configuration source.</param>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.SectionName">
|
<summary>The section name under which this configuration section is expected to be found.</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.CachingTypeRegistrationProviderName">
|
<summary>The Type Registration Provider name for the Caching Application Block</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.CryptographyTypeRegistrationProviderName">
|
<summary>The Type Registration Provider name for the Cryptography Application Block</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.ExceptionHandlingTypeRegistrationProviderName">
|
<summary>The Type Registration Provider name for the Exception Handling Application Block</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.InstrumentationTypeRegistrationProviderName">
|
<summary>The Type Registration Provider name for Instrumentation Configuration</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.LoggingTypeRegistrationProviderName">
|
<summary>The Type Registration Provider name for the Logging Application Block</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.PolicyInjectionTypeRegistrationProviderName">
|
<summary>The Type Registration Provider name for the Policy Injection Application Block</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.SecurityTypeRegistrationProviderName">
|
<summary>The Type Registration Provider name for the Security Application Block</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.DataAccessTypeRegistrationProviderName">
|
<summary>The Type Registration Provider name for the Data Access Application Block</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.ValidationTypeRegistrationProviderName">
|
<summary>The Type Registration Provider name for the Validation Application Block</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProvidersConfigurationSection.TypeRegistrationProviders">
|
<summary>
|
Gets the collection of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/> configured in this section.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.AssemblyQualifiedTypeNameConverter">
|
<summary>
|
Represents a configuration converter that converts a string to <see cref="T:System.Type"/> based on a fully qualified name.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.AssemblyQualifiedTypeNameConverter.ConvertTo(System.ComponentModel.ITypeDescriptorContext,System.Globalization.CultureInfo,System.Object,System.Type)">
|
<summary>
|
Returns the assembly qualified name for the passed in Type.
|
</summary>
|
<param name="context">The container representing this System.ComponentModel.TypeDescriptor.</param>
|
<param name="culture">Culture info for assembly</param>
|
<param name="value">Value to convert.</param>
|
<param name="destinationType">Type to convert to.</param>
|
<returns>Assembly Qualified Name as a string</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.AssemblyQualifiedTypeNameConverter.ConvertFrom(System.ComponentModel.ITypeDescriptorContext,System.Globalization.CultureInfo,System.Object)">
|
<summary>
|
Returns a type based on the assembly qualified name passed in as data.
|
</summary>
|
<param name="context">The container representing this System.ComponentModel.TypeDescriptor.</param>
|
<param name="culture">Culture info for assembly.</param>
|
<param name="value">Data to convert.</param>
|
<returns>Type of the data</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames">
|
<summary>
|
A set of string constants listing the names of the configuration
|
sections used by the standard set of Entlib blocks.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.Cryptography">
|
<summary>
|
Crypto block section name
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.Data">
|
<summary>
|
Data Access Application Block custom settings
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.ExceptionHandling">
|
<summary>
|
Exception Handling Application Block section name
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.Caching">
|
<summary>
|
Caching Application Block section name
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.Security">
|
<summary>
|
Security Application Block section name
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.Logging">
|
<summary>
|
Logging Application Block section name
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.Instrumentation">
|
<summary>
|
Instrumentation section name
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.PolicyInjection">
|
<summary>
|
Policy injection section name
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.Validation">
|
<summary>
|
Validation section name
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.DataRegistrationProviderLocatorType">
|
<summary>
|
Not actually a section name, this is the type name used to get the
|
TypeRegistrationProviderLocatorStrategy used to retrieve information
|
for the Data Access Application Block.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.BlockSectionNames.ValidationRegistrationProviderLocatorType">
|
<summary>
|
Not actually a section name, this is the type name used to get the
|
TypeRegistrationProviderLocatorStrategy used to retrieve information
|
for the Validation Application Block.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ByteArrayTypeConverter">
|
<summary>
|
Represents a configuration converter that converts a byte array to and from a string representation by using base64 encoding.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ByteArrayTypeConverter.CanConvertFrom(System.ComponentModel.ITypeDescriptorContext,System.Type)">
|
<summary>
|
Returns whether this converter can convert an object of the given type to the type of this converter.
|
</summary>
|
<param name="context">An <see cref="T:System.ComponentModel.ITypeDescriptorContext"/> object.</param>
|
<param name="sourceType">A <see cref="T:System.Type"/> that represents the type you want to convert from. </param>
|
<returns><see langword="true"/> if this converter can perform the conversion; otherwise, <see langword="falase"/>. </returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ByteArrayTypeConverter.ConvertFrom(System.ComponentModel.ITypeDescriptorContext,System.Globalization.CultureInfo,System.Object)">
|
<summary>
|
Converts the given value to the type of this converter.
|
</summary>
|
<param name="context">An <see cref="T:System.ComponentModel.ITypeDescriptorContext"/> object.</param>
|
<param name="culture">A <see cref="T:System.Globalization.CultureInfo"/> object.</param>
|
<param name="value">An <see cref="T:System.Object"/> that represents the converted value. </param>
|
<returns>An <see cref="T:System.Object"/> that represents the converted value. </returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ByteArrayTypeConverter.CanConvertTo(System.ComponentModel.ITypeDescriptorContext,System.Type)">
|
<summary>
|
Returns whether this converter can convert the object to the specified type.
|
</summary>
|
<param name="context">An <see cref="T:System.ComponentModel.ITypeDescriptorContext"/> object.</param>
|
<param name="destinationType">A <see cref="T:System.Type"/> that represents the type you want to convert to..</param>
|
<returns><b>true</b> if the converter can convert to the specified type, <b>false</b> otherwise.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ByteArrayTypeConverter.ConvertTo(System.ComponentModel.ITypeDescriptorContext,System.Globalization.CultureInfo,System.Object,System.Type)">
|
<summary>
|
Converts the given value object to the specified type, using the arguments.
|
</summary>
|
<param name="context">An <see cref="T:System.ComponentModel.ITypeDescriptorContext"/> object.</param>
|
<param name="culture">A <see cref="T:System.Globalization.CultureInfo"/> object.</param>
|
<param name="value">The <see cref="T:System.Object"/> to convert.</param>
|
<param name="destinationType">The <see cref="T:System.Type"/> to convert the value parameter to.</param>
|
<returns>The converted value.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationFileSourceWatcher">
|
<summary>
|
Watcher for configuration sections in configuration files.
|
</summary>
|
<remarks>
|
This implementation uses a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher"/> to watch for changes
|
in the configuration files.
|
</remarks>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceWatcher">
|
<summary>
|
Reacts to changes on the medium on which a set of configuration sections are serialized.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceWatcher.#ctor(System.String,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceWatcher"/> class.
|
</summary>
|
<param name="configSource">The identification of the medium.</param>
|
<param name="refresh"><b>true</b> if changes should be notified, <b>false</b> otherwise.</param>
|
<param name="changed">The callback for changes notification.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceWatcher.StartWatching">
|
<summary>
|
Starts watching for changes on the serialization medium.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceWatcher.StopWatching">
|
<summary>
|
Stops watching for changes on the serialization medium.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceWatcher.ConfigSource">
|
<summary>
|
Gets or sets the identification of the medium where the watched set of configuration sections is stored.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceWatcher.WatchedSections">
|
<summary>
|
Gets or sets the collection of watched sections.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceWatcher.Watcher">
|
<summary>
|
Gets the watcher over the serialization medium.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationFileSourceWatcher.#ctor(System.String,System.String,System.Boolean,System.Int32,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationFileSourceWatcher"/> class.
|
</summary>
|
<param name="configurationFilepath">The path for the configuration file to watch.</param>
|
<param name="configSource">The identification of the configuration source.</param>
|
<param name="refresh"><b>true</b> if changes should be notified, <b>false</b> otherwise.</param>
|
<param name="refreshInterval">The poll interval in milliseconds.</param>
|
<param name="changed">The callback for changes notification.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationFileSourceWatcher.GetFullFileName(System.String,System.String)">
|
<summary>
|
Gets the full file name associated to the configuration source.
|
</summary>
|
<param name="configurationFilepath">The path for the main configuration file.</param>
|
<param name="configSource">The configuration source to watch.</param>
|
<returns>The path to the configuration file to watch. It will be the same as <paramref name="configurationFilepath"/>
|
if <paramref name="configSource"/> is empty, or the full path for <paramref name="configSource"/> considered as a
|
file name relative to the main configuration file.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationFileSourceWatcher.Watcher">
|
<summary>
|
Gets the watcher over the serialization medium.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs">
|
<summary>
|
Event arguments describing which sections have changed in a configuration source.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs"/> class.
|
</summary>
|
<param name="configurationSource">Configuration source that changed.</param>
|
<param name="changedSectionNames">Sequence of the section names in <paramref name="configurationSource"/>
|
that have changed.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.ServiceLocation.IServiceLocator,System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Initializes a new instance of the <see cref="T:System.EventArgs"/> class.
|
</summary>
|
<param name="configurationSource">Configuration source that changed.</param>
|
<param name="container"><see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> object that has been configured with the
|
contents of <paramref name="configurationSource"/>.</param>
|
<param name="changedSectionNames">Sequence of the section names in <paramref name="configurationSource"/>
|
that have changed.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs.ConfigurationSource">
|
<summary>
|
The configuration source that has changed.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs.Container">
|
<summary>
|
The container that has been configured with the new
|
configuration.
|
</summary>
|
<remarks>If this event is received directly from a
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> this property will
|
be null. Otherwise it will reference a valid container
|
that has been configured with the contents of the updated
|
configuration source.</remarks>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs.ChangedSectionNames">
|
<summary>
|
The set of section names that have changed.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceElement">
|
<summary>
|
Represents the configuration settings that describe an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceElement.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceElement"/> class with default values.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceElement.#ctor(System.String,System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceElement"/> class with a name and an type.
|
</summary>
|
<param name="name">The instance name.</param>
|
<param name="type">The type for the represented <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceElement.CreateSource">
|
<summary>
|
Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> configured with the receiver's settings.
|
</summary>
|
<returns>A new configuration source.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceElement.CreateDesignSource(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource)">
|
<summary>
|
Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource"/> configured based on this configuration element.
|
</summary>
|
<returns>Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource"/> or null if this source does not have design-time support.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceFactory">
|
<summary>
|
Contains factory methods to create configuration sources.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceFactory.Create(System.String)">
|
<summary>
|
Creates a new configuration sources based on the configuration information from the application's default
|
configuration file.
|
</summary>
|
<param name="name">The name for the desired configuration source.</param>
|
<returns>The new configuration source instance described in the configuration file.</returns>
|
<exception cref="T:System.Configuration.ConfigurationErrorsException">when no configuration information is found for name <paramref name="name"/>.</exception>
|
<exception cref="T:System.ArgumentNullException">when <paramref name="name"/> is null or empty.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceFactory.Create">
|
<summary>
|
Creates a new configuration sources based on the default configuration information from the
|
application's default configuration file.
|
</summary>
|
<returns>The new configuration source instance described as the default in the configuration file,
|
or a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource"/> if the is no configuration sources configuration.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection">when there is a configuration section but it does not define
|
a default configurtion source, or when the configuration for the defined default configuration source is not found.</exception>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection">
|
<summary>
|
Configuration section for the configuration sources.
|
</summary>
|
<remarks>
|
This configuration must reside in the application's default configuration file.
|
</remarks>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection.SectionName">
|
<summary>
|
This field supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection.GetConfigurationSourceSection">
|
<summary>
|
Returns the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection"/> from the application's default configuration file.
|
</summary>
|
<returns>The section from the configuration file, or <see langword="null"/> (<b>Nothing</b> in Visual Basic) if the section is not present in the configuration file.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection.SelectedSource">
|
<summary>
|
Gets or sets the name for the default configuration source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection.ParentSource">
|
<summary>
|
Gets or sets the name for the parent configuration source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection.Sources">
|
<summary>
|
Gets the collection of defined configuration sources.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection.RedirectedSections">
|
<summary>
|
Gets the collection of redirected sections.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler">
|
<summary>
|
Event handler called after a configuration has changed.
|
</summary>
|
<param name="sender">
|
<para>The source of the event.</para>
|
</param>
|
<param name="e">
|
<para>A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventArgs"/> that contains the event data.</para>
|
</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventArgs">
|
<summary>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventArgs.#ctor(System.String)">
|
<summary>
|
<para>Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventArgs"/> class with the section name</para>
|
</summary>
|
<param name="sectionName"><para>The section name of the changes.</para></param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventArgs.SectionName">
|
<summary>
|
<para>Gets the section name where the changes occurred.</para>
|
</summary>
|
<value>
|
<para>The section name where the changes occurred.</para>
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationElementTypeAttribute">
|
<summary>
|
Indicates the configuration object type that is used for the attributed object.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationElementTypeAttribute.#ctor">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationElementTypeAttribute"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationElementTypeAttribute.#ctor(System.Type)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationElementTypeAttribute"/> class with the configuration object type.
|
</summary>
|
<param name="configurationType">The <see cref="T:System.Type"/> of the configuration object.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationElementTypeAttribute.#ctor(System.String)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationElementTypeAttribute"/> class with the configuration object type.
|
</summary>
|
<param name="typeName">The <see cref="T:System.Type"/> name of the configuration object.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationElementTypeAttribute.ConfigurationType">
|
<summary>
|
Gets the <see cref="T:System.Type"/> of the configuration object.
|
</summary>
|
<value>
|
The <see cref="T:System.Type"/> of the configuration object.
|
</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationElementTypeAttribute.TypeName">
|
<summary>
|
Gets <see cref="T:System.Type"/> name of the configuration object.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationFileChangedEventArgs">
|
<summary>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationFileChangedEventArgs.#ctor(System.String,System.String)">
|
<summary>
|
<para>Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventArgs"/> class with the
|
configuration file and the section name.</para>
|
</summary>
|
<param name="configurationFile"><para>The configuration file where the change occured.</para></param>
|
<param name="sectionName"><para>The section name of the changes.</para></param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationFileChangedEventArgs.ConfigurationFile">
|
<summary>
|
<para>Gets the configuration file of the data that changed.</para>
|
</summary>
|
<value>
|
<para>The configuration file of the data that changed.</para>
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigSectionLocator">
|
<summary>
|
A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> implementation that looks up
|
a provider by looking for the named configuration section in the given <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>.
|
If found, tries to cast the config section to <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider">
|
<summary>
|
This class encapsulates the logic used to find the type registration providers
|
in the current application.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider">
|
<summary>
|
This interface represents an object that can return configuration information
|
used to configure a container to resolve Entlib objects.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider.GetRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to configure
|
the container.
|
</summary>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> containing
|
the configuration information.</param>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider.GetUpdatedRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to reconfigure
|
the container after a configuration source has changed.
|
</summary>
|
<remarks>If there are no reregistrations, return an empty sequence.</remarks>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> containing
|
the configuration information.</param>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider.#ctor">
|
<summary>
|
Create a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> instance
|
without a name.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider.#ctor(System.String)">
|
<summary>
|
Create a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> instance.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider.GetRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to configure
|
the container.
|
</summary>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider.GetUpdatedRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to reconfigure
|
the container after a configuration source has changed.
|
</summary>
|
<remarks>If there are no reregistrations, return an empty sequence.</remarks>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> containing
|
the configuration information.</param>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider.CreateDefaultProvider">
|
<summary>
|
Creates a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> that will return all the
|
configuration for entlib blocks.
|
</summary>
|
<returns>The locator.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider.CreateDefaultProvider(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource)">
|
<summary>
|
Creates a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> that will return all the
|
configuration for entlib blocks.
|
</summary>
|
<param name="configurationSource">Configuration source containing any customizations
|
to the locator list.</param>
|
<param name="reconfiguringEventSource">Event source notifying of container reconfiguration events.</param>
|
<returns>The locator.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider.Name">
|
<summary>
|
Every locator has a name associated with it so that it can be added and removed
|
from composites. This property returns that name.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigSectionLocator.#ctor(System.String)">
|
<summary>
|
Construct an instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigSectionLocator"/> that will
|
look for the given <paramref name="sectionName"/>.
|
</summary>
|
<param name="sectionName">Section name in configuration to look for.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigSectionLocator.#ctor(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource)">
|
<summary>
|
Construct an instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigSectionLocator"/> that
|
will look for the given <paramref name="sectionName"/>. It also
|
registers for the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource.ContainerReconfiguring"/>
|
event, and will request updated type registrations from the section
|
at that time.
|
</summary>
|
<param name="sectionName">Section name in configuration to look for.</param>
|
<param name="reconfiguringEventSource">Event source to signal when reconfiguration is needed.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigSectionLocator.GetRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to configure
|
the container.
|
</summary>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConfigSectionLocator.GetUpdatedRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to reconfigure
|
the container after a configuration source has changed.
|
</summary>
|
<remarks>If there are no reregistrations, return an empty sequence.</remarks>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> containing
|
the configuration information.</param>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Container">
|
<summary>
|
A static marker class to denote types constructed by the container when registering a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Container.Resolved``1">
|
<summary>
|
Indicates a type to be resolved from a container.
|
</summary>
|
<typeparam name="T">The type to resolve from the container.</typeparam>
|
<returns>The type resolved</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Container.Resolved``1(System.String)">
|
<summary>
|
Indicates a type to be resolved by name from a container.
|
</summary>
|
<typeparam name="T">The type to resolve from the container.</typeparam>
|
<param name="name">The name to use when resolving the type.</param>
|
<returns>The type resolved.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Container.ResolvedIfNotNull``1(System.String)">
|
<summary>
|
Indicates a type to be resolved by name from a container, if the name is not null.
|
</summary>
|
<typeparam name="T">The type to resolve from the container.</typeparam>
|
<param name="name">The name to use when resolving the type.</param>
|
<returns>The type resolved.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Container.ResolvedEnumerable``1(System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Indicates an enumberable set to be resolved from a container using the names supplied
|
in <paramref name="names"/>.
|
</summary>
|
<typeparam name="T">The type to resolve from the container.</typeparam>
|
<param name="names">The set of names to use when resolving from the container.</param>
|
<returns></returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1">
|
<summary>
|
Class that can be used as a base class for instance factories.
|
</summary>
|
<remarks>
|
This class is used to create instances of types compatible with <typeparamref name="T"/> described
|
by a configuration source.
|
</remarks>
|
<typeparam name="T">Type of instance to create</typeparam>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1.#ctor(Microsoft.Practices.ServiceLocation.IServiceLocator)">
|
<summary>
|
Create an instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1"/> that resolves objects
|
using the supplied <paramref name="container"/>.
|
</summary>
|
<param name="container"><see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> to use to resolve objects.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Create an instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1"/>. A container will be
|
constructed under the hood and be initialized with the information in <paramref name="configurationSource"/>.
|
</summary>
|
<param name="configurationSource">Configuration information.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1.#ctor">
|
<summary>
|
Create an instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1"/> that resolves objects
|
through the Entlib default container.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1.CreateDefault">
|
<summary>
|
Returns a new instance of <typeparamref name="T"/> based on the default instance configuration.
|
</summary>
|
<returns>
|
A new instance of <typeparamref name="T"/>.
|
</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1.Create(System.String)">
|
<summary>
|
Returns an new instance of <typeparamref name="T"/> based on the configuration for <paramref name="name"/>.
|
</summary>
|
<param name="name">The name of the required instance.</param>
|
<returns>
|
A new instance of <typeparamref name="T"/>.
|
</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerBasedInstanceFactory`1.Dispose">
|
<summary>
|
Releases resources currently held by this object.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedEnumerableParameter">
|
<summary>
|
A parameter representing a set of named items to be resolved by the container.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue">
|
<summary>
|
Represents a strategy to retrieve a value to inject.
|
</summary>
|
<remarks>
|
These strategies can either represent values known at container configuration time or
|
values that need to be resolved during object construction.
|
</remarks>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter"/>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue.#ctor(System.Linq.Expressions.Expression)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue"/> class with a <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue.Expression"/>.
|
</summary>
|
<param name="expression">The <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue.Expression"/> representing the value to inject.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue.Expression">
|
<summary>
|
Gets the <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue.Expression"/> representing the value to inject.
|
</summary>
|
<remarks>
|
Concrete strategies interpret the expression to provide relevant registration data.
|
</remarks>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue.Type">
|
<summary>
|
Gets the <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue.Type"/> of the value to inject.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedEnumerableParameter.Names">
|
<summary>
|
The set of names to resolve in the container.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedEnumerableParameter.ElementType">
|
<summary>
|
Enumeration type
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter">
|
<summary>
|
Represents a construction parameter resolved through the container.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter.#ctor(System.Linq.Expressions.MethodCallExpression)">
|
<summary>
|
Initializes the construction parameter from the <see cref="T:System.Linq.Expressions.MethodCallExpression"/>. This method call expression
|
expected to be respresented through the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Container"/> static marker class.
|
</summary>
|
<remarks>
|
|
Given a class Example defined as:
|
|
public class Example
|
{
|
public Example(Argument arg);
|
}
|
|
A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration`1"/> and <see cref="T:System.Linq.Expressions.LambdaExpression"/> for this configuration might appear as follows:
|
new TypeRegistration<Example>(() => new Example(Container.Resolved<Argument>("SomeName"));
|
|
During construction of the Example class, Argument will be resolved and injected by the container.
|
The <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Container.Resolved``1"/> marker interface is used to represent
|
this requirement to a container configurator and is translated to a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter"/>.
|
</remarks>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Container"/>
|
<param name="expression">The method expression representing the type to resolve and named value.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ContainerResolvedParameter.Name">
|
<summary>
|
The name to use when resolving the type represented by the method call expression.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.InjectedProperty">
|
<summary>
|
Represents a property injected in a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/>.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.InjectedProperty.PropertyName">
|
<summary>
|
Gets the name of the injected property.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.InjectedProperty.PropertyValue">
|
<summary>
|
Gets the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue"/> describing the value injected through the property.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.RegistrationExpressionBuilder">
|
<summary>
|
Builds expression used in <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> for custom and standard Enterprise Library objects.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.RegistrationExpressionBuilder.BuildExpression(System.Type,System.Collections.Specialized.NameValueCollection)">
|
<summary>
|
Builds a <see cref="T:System.Linq.Expressions.LambdaExpression"/> expected for custom Enterprise Library objects based on the supplied type's object
|
and provide attributes.
|
</summary>
|
<remarks>
|
The <paramref name="typeToBuild"/> must supply an accessible constructor that takes a single parameter of type <see cref="T:System.Collections.Specialized.NameValueCollection"/>.
|
</remarks>
|
<param name="typeToBuild">The object type to build the expression around.</param>
|
<param name="attributes">Attributes to pass to the constructor of <paramref name="typeToBuild"/></param>
|
<returns>A <see cref="T:System.Linq.Expressions.LambdaExpression"/> that defines the construction of <paramref name="typeToBuild"/> in a <see cref="T:System.Linq.Expressions.NewExpression"/>.</returns>
|
<exception cref="T:System.ArgumentException">Is thrown if the <paramref name="typeToBuild"/> does not provide a proper constructor.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.RegistrationExpressionBuilder.BuildNewExpression(System.Type,System.Collections.Specialized.NameValueCollection)">
|
<summary>
|
Builds a <see cref="T:System.Linq.Expressions.NewExpression"/> expected for custom Enterprise Library objects based on the supplied type's object
|
and provide attributes.
|
</summary>
|
<remarks>
|
The <paramref name="typeToBuild"/> must supply an accessible constructor that takes a single parameter of type <see cref="T:System.Collections.Specialized.NameValueCollection"/>.
|
</remarks>
|
<param name="typeToBuild">The object type to build the expression around.</param>
|
<param name="attributes">Attributes to pass to the constructor of <paramref name="typeToBuild"/></param>
|
<returns>A <see cref="T:System.Linq.Expressions.NewExpression"/> that defines the construction of <paramref name="typeToBuild"/> in a <see cref="T:System.Linq.Expressions.NewExpression"/>.</returns>
|
<exception cref="T:System.ArgumentException">Is thrown if the <paramref name="typeToBuild"/> does not provide a proper constructor.</exception>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeLoadingLocator">
|
<summary>
|
A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> implementation that
|
loads a type by name, and returns an instance of that type as the provider.
|
</summary>
|
<remarks>
|
This is primarily used to support the Data Access Application Block's configuration provider, which
|
has to pull stuff from several spots. Also, we load by name rather than
|
using a type object directly to avoid a compile time dependency from Common on the
|
Data assembly.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeLoadingLocator.#ctor(System.String)">
|
<summary>
|
Construct a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeLoadingLocator"/> that will use the
|
type named in <paramref name="typeName"/> as the provider.
|
</summary>
|
<param name="typeName">type to construct as a provider. This type must have a single argument
|
constructor that takes an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> parameter.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeLoadingLocator.#ctor(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerReconfiguringEventSource)">
|
<summary>
|
Construct a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeLoadingLocator"/> that will use the
|
type named in <paramref name="typeName"/> as the provider.
|
</summary>
|
<param name="typeName">type to construct as a provider. This type must have a single argument
|
constructor that takes an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> parameter.</param>
|
<param name="reconfiguringEventSource">The event source containing events raised when the configuration source is changed.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeLoadingLocator.GetRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to configure
|
the container.
|
</summary>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeLoadingLocator.GetUpdatedRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to reconfigure
|
the container after a configuration source has changed.
|
</summary>
|
<remarks>If there are no reregistrations, return an empty sequence.</remarks>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> containing
|
the configuration information.</param>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration">
|
<summary>
|
Represents a container registration entry as a <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.LambdaExpression"/> and additional metadata.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.#ctor(System.Linq.Expressions.LambdaExpression)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> class with a <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.LambdaExpression"/>
|
as the model for injection.
|
</summary>
|
<param name="expression">The <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.LambdaExpression"/> representing the injection.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.#ctor(System.Linq.Expressions.LambdaExpression,System.Type)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> class with a <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.LambdaExpression"/>
|
as the model for injection.
|
</summary>
|
<param name="expression">The <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.LambdaExpression"/> representing the injection.</param>
|
<param name="serviceType">The service type to register the implementation against.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.DefaultName(System.Type)">
|
<summary>
|
Returns the default name for a type that will be returned if no name
|
is otherwise specified.
|
</summary>
|
<param name="serviceType">Type that was registered.</param>
|
<returns>Default name that will be used.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.DefaultName``1">
|
<summary>
|
Returns the default name for a type that will be returned if no name
|
is otherwise specified.
|
</summary>
|
<typeparam name="TServiceType">Type that was registered.</typeparam>
|
<returns>Default name that will be used.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.ImplementationType">
|
<summary>
|
Gets the <see cref="T:System.Type"/> for the registration entry.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.NewExpressionBody">
|
<summary>
|
Returns the expression body representing the creation constructor call.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.ServiceType">
|
<summary>
|
Gets the <see cref="T:System.Type"/> for which the <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.ImplementationType"/> provides an implementation.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.Name">
|
<summary>
|
Gets the name under which the entry should be registered to the container.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.IsPublicName">
|
<summary>
|
Is this registration for a type that is part of a public API? If
|
true, configurators should not transform the name in any way. If
|
false, this is an internal implementation class that users will not
|
be resolving directly, and as such the name can be manipulated safely
|
without interfering with the public API.
|
</summary>
|
<remarks>Some containers have restrictions on the allowed names (for example,
|
many require names to be globally unique). Some object names need to be
|
left alone (for example, Database or Exception policies) becuase that is
|
what the user will use to get those objects. Other names (like for instrumentation
|
providers) are internal and can be freely changed by the configurator as
|
needed to fit into the container.</remarks>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.LambdaExpression">
|
<summary>
|
Gets <see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.LambdaExpression"/> representing the injection.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.IsDefault">
|
<summary>
|
Gets <see langword="true"/> if the registration is to be considered the default for the service type,
|
<see langword="false"/> otherwise.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.Lifetime">
|
<summary>
|
The required lifetime for this service implementation.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.ConstructorParameters">
|
<summary>
|
Gets the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ParameterValue"/> instances describing values injected through the constructor.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration.InjectedProperties">
|
<summary>
|
Gets the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.InjectedProperty"/> instances describing values injected to properties.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration`1">
|
<summary>
|
Represents a container registration entry as a <see cref="T:System.Linq.Expressions.LambdaExpression"/> and additional metadata for constructing a specific type.
|
</summary>
|
<typeparam name="T">The service type registered with the container</typeparam>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration`1.#ctor(System.Linq.Expressions.Expression{System.Func{`0}})">
|
<summary>
|
Initializes the TypeRegistration with a <see cref="T:System.Linq.Expressions.LambdaExpression"/> for T.
|
</summary>
|
<param name="expression"><see cref="T:System.Linq.Expressions.LambdaExpression"/> that providing the construction model for T.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationLifetime">
|
<summary>
|
A set of values indicating what the lifetime of service implementations
|
in the container should be.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationLifetime.Singleton">
|
<summary>
|
This implementation should be stored by the container and it should return
|
the same object for each request.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationLifetime.Transient">
|
<summary>
|
A new instance should be returned for each request.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.CompositeTypeRegistrationsProviderLocator">
|
<summary>
|
A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> that provides a composite
|
over a collection of individual <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/>s.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.CompositeTypeRegistrationsProviderLocator.#ctor(System.Collections.Generic.IEnumerable{Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider})">
|
<summary>
|
Create the composite with the list of locators to use.
|
</summary>
|
<param name="locators">The locators.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.CompositeTypeRegistrationsProviderLocator.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider[])">
|
<summary>
|
Create the composite with the list of locators to use.
|
</summary>
|
<param name="locators">The locators.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.CompositeTypeRegistrationsProviderLocator.GetRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to configure
|
the container.
|
</summary>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.CompositeTypeRegistrationsProviderLocator.GetUpdatedRegistrations(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Return the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects needed to reconfigure
|
the container after a configuration source has changed.
|
</summary>
|
<remarks>If there are no reregistrations, return an empty sequence.</remarks>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> containing
|
the configuration information.</param>
|
<returns>The sequence of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Unity.UnityContainerConfigurator">
|
<summary>
|
The <see cref="T:Microsoft.Practices.Unity.UnityContainer"/> specific configurator for <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> entries.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Unity.UnityContainerConfigurator.#ctor(Microsoft.Practices.Unity.IUnityContainer)">
|
<summary>
|
Initializer for the configurator.
|
</summary>
|
<param name="container">The <see cref="T:Microsoft.Practices.Unity.IUnityContainer"/> to configure.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Unity.UnityContainerConfigurator.RegisterAllCore(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider)">
|
<summary>
|
Consume the set of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> objects and
|
configure the associated container.
|
</summary>
|
<param name="configurationSource">Configuration source to read registrations from.</param>
|
<param name="rootProvider"><see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> that knows how to
|
read the <paramref name="configurationSource"/> and return all relevant type registrations.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Unity.UnityContainerConfigurator.RegisterUpdates(System.Collections.Generic.IEnumerable{Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration})">
|
<summary>
|
When overridden in a derived class, this method should reconfigure the container
|
with the provided <paramref name="updatedRegistrations"/>.
|
</summary>
|
<param name="updatedRegistrations">The new type registrations to apply to the container.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Unity.UnityContainerConfigurator.GetLocator">
|
<summary>
|
When overridden in a derived class, this method should return an implementation
|
of <see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> that wraps the actual container.
|
</summary>
|
<returns>The <see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> that objects can use to re-resolve
|
dependencies after the container has been reconfigured.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Unity.UnityContainerConfigurator.Register(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration)">
|
<summary>
|
Registers the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistration"/> entry with the container.
|
</summary>
|
<param name="registrationEntry">The type registration entry to add to the container.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConstantParameterValue">
|
<summary>
|
Represents an injected parameter value that can be determined at the time of container configuration.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConstantParameterValue.#ctor(System.Linq.Expressions.Expression)">
|
<summary>
|
Initializes a value parameter with the specified expression to be evaluated when providing the value parameter.
|
</summary>
|
<param name="expression">The expression representing the value to provide to the parameter.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ConstantParameterValue.Value">
|
<summary>
|
The parameter value to inject.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1">
|
<summary>
|
Generic helper class for custom provider configuration objects.
|
</summary>
|
<remarks>
|
The helper class encapsulates the logic to manage an unknown set of properties in <see cref="T:System.Configuration.ConfigurationElement"/>s.
|
This logic cannot be inherited by the configuration objects because these objects must inherit from the base configuration
|
object type for the hierarchy of providers the configuration object represents.
|
</remarks>
|
<typeparam name="T">The type of the custom provider configuration object.</typeparam>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.propertiesCollection">
|
<summary>
|
Collection of managed properties
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.#ctor(`0)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1"/> class for a configuration object.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.HandleIsModified">
|
<summary>
|
Concrete implementation of <see cref="M:System.Configuration.ConfigurationElement.IsModified"/>.
|
</summary>
|
<returns><b>true</b> if the managed element has been modified.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.HandleOnDeserializeUnrecognizedAttribute(System.String,System.String)">
|
<summary>
|
Concrete implementation of <see cref="M:System.Configuration.ConfigurationElement.OnDeserializeUnrecognizedAttribute(System.String,System.String)"/>.
|
</summary>
|
<param name="name">The name of the unrecognized attribute.</param>
|
<param name="value">The value of the unrecognized attribute.</param>
|
<returns><code>true</code> when an unknown attribute is encountered while deserializing.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.HandleReset(System.Configuration.ConfigurationElement)">
|
<summary>
|
Concrete implementation of <see cref="M:System.Configuration.ConfigurationElement.Reset(System.Configuration.ConfigurationElement)"/>.
|
</summary>
|
<param name="parentElement">The parent node of the configuration element.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.HandleSetAttributeValue(System.String,System.String)">
|
<summary>
|
Sets the value to the specified attribute and updates the properties collection.
|
</summary>
|
<param name="key">The key of the attribute to set.</param>
|
<param name="value">The value to set for the attribute.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.HandleUnmerge(System.Configuration.ConfigurationElement,System.Configuration.ConfigurationElement,System.Configuration.ConfigurationSaveMode)">
|
<summary>
|
Concrete implementation of <see cref="M:System.Configuration.ConfigurationElement.Unmerge(System.Configuration.ConfigurationElement,System.Configuration.ConfigurationElement,System.Configuration.ConfigurationSaveMode)"/>.
|
</summary>
|
<param name="sourceElement">A <see cref="T:System.Configuration.ConfigurationElement"/> object at the current level containing a merged view of the properties.</param>
|
<param name="parentElement">The parent <see cref="T:System.Configuration.ConfigurationElement"/> object, or a <see langword="null"/> reference if this is the top level.</param>
|
<param name="saveMode">A <see cref="T:System.Configuration.ConfigurationSaveMode"/> object that determines which property values to include.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.IsKnownPropertyName(System.String)">
|
<summary>
|
Returns whether the property name is known in advance, i.e. it is not a dynamic property.
|
</summary>
|
<param name="propertyName">The property name.</param>
|
<returns><b>true</b> if the property is known in advance, <b>false</b> otherwise.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.Attributes">
|
<summary>
|
Gets the collection of custom attributes.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.CustomProviderDataHelper`1.Properties">
|
<summary>
|
Gets a <see cref="T:System.Configuration.ConfigurationPropertyCollection"/> of the properties that are defined for this configuration element when implemented in a derived class.
|
</summary>
|
<value>
|
A <see cref="T:System.Configuration.ConfigurationPropertyCollection"/> of the properties that are defined for this configuration element when implemented in a derived class.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource">
|
<summary>
|
Represents a configuration source that is backed by a dictionary of named objects.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.sections">
|
<summary>
|
This field supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.eventHandlers">
|
<summary>
|
This field supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.GetSection(System.String)">
|
<summary>
|
Retrieves the specified <see cref="T:System.Configuration.ConfigurationSection"/>.
|
</summary>
|
<param name="sectionName">The name of the section to be retrieved.</param>
|
<returns>The specified <see cref="T:System.Configuration.ConfigurationSection"/>, or <see langword="null"/> (<b>Nothing</b> in Visual Basic)
|
if a section by that name is not found.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the configuration source.
|
</summary>
|
<remarks>
|
If a configuration section with the specified name already exists it will be replaced.
|
</remarks>
|
<param name="name">The name by which the <paramref name="section"/> should be added.</param>
|
<param name="section">The configuration section to add.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.Remove(System.String)">
|
<summary>
|
Removes a <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration source.
|
</summary>
|
<param name="sectionName">The name of the section to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.Contains(System.String)">
|
<summary>
|
Determines if a section name exists in the source.
|
</summary>
|
<param name="name">The section name to find.</param>
|
<returns><b>true</b> if the section exists; otherwise, <b>false</b>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.AddSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Adds a handler to be called when changes to the section named <paramref name="sectionName"/> are detected.
|
</summary>
|
<param name="sectionName">The name of the section to watch for.</param>
|
<param name="handler">The handler for the change event to add.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.RemoveSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Removes a handler to be called when changes to section <code>sectionName</code> are detected.
|
</summary>
|
<param name="sectionName">The name of the watched section.</param>
|
<param name="handler">The handler for the change event to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.OnSourceChangedEvent(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceChangedEventArgs)">
|
<summary>
|
Raises the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.SourceChanged"/> event.
|
</summary>
|
<param name="args">Event arguments</param>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource.SourceChanged">
|
<summary>
|
Raised when anything in the source changes.
|
</summary>
|
<remarks>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.DictionaryConfigurationSource"/> does not report any
|
configuration change events.
|
</remarks>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSourceElement">
|
<summary>
|
Represents the configuration settings that describe a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSourceElement.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSourceElement"/> class with a default name and an empty path.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSourceElement.#ctor(System.String,System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSourceElement"/> class with a name and an path.
|
</summary>
|
<param name="name">The instance name.</param>
|
<param name="filePath">The file path.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSourceElement.CreateSource">
|
<summary>
|
Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource"/> configured with the receiver's settings.
|
</summary>
|
<returns>A new configuration source.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSourceElement.CreateDesignSource(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource)">
|
<summary>
|
Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource"/> configured based on this configuration element.
|
</summary>
|
<returns>Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource"/> or null if this source does not have design-time support.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSourceElement.FilePath">
|
<summary>
|
Gets or sets the file path. This is a required field.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.GenericEnumeratorWrapper`1">
|
<devdoc>
|
Represents a genereic enumerator for the NamedElementCollection.
|
</devdoc>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCategory">
|
<summary>
|
Represents a category on an ADM template file.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCategory.#ctor(System.String)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCategory"/> class.
|
</summary>
|
<param name="categoryName">
|
The categor name.
|
</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCategory.Categories">
|
<summary>
|
Gest the list of sub categories.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCategory.Name">
|
<summary>
|
Gets the name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCategory.Policies">
|
<summary>
|
Gets the list of policies in a category.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCheckboxPart">
|
<summary>
|
Represents a CHECKBOX part on an ADM template.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart">
|
<summary>
|
Represents a part in an ADM template.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.PartStartTemplate">
|
<summary>
|
The part start template.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.PartEndTemplate">
|
<summary>
|
The part end template.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.ValueNameTemplate">
|
<summary>
|
The part value name.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.KeyNameTemplate">
|
<summary>
|
The part key name.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.#ctor(System.String,System.String,System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart"/> class.
|
</summary>
|
<param name="partName">The name for the part.</param>
|
<param name="keyName">The registry key for part, or <see langword="null"/>
|
if no key name is required for the part.</param>
|
<param name="valueName">The name for the registry value for the part.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.Write(System.IO.TextWriter)">
|
<summary>
|
Writes the part the <paramref name="writer"/>.
|
</summary>
|
<param name="writer">
|
The <see cref="T:System.IO.TextWriter"/> to write.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.WritePart(System.IO.TextWriter)">
|
<summary>
|
Writes the text representing the part to the <paramref name="writer"/>.
|
</summary>
|
<param name="writer">The <see cref="T:System.IO.TextWriter"/> to where the text for the part should be written to.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.KeyName">
|
<summary>
|
Gets the registry key for the part, or <see langword="null"/> if no key name is required for the part.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.PartName">
|
<summary>
|
Gets the name for the part.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.ValueName">
|
<summary>
|
Gets the name for the registry value for the part.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart.PartTypeTemplate">
|
<summary>
|
Gest the template representing the type of the part.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCheckboxPart.WritePart(System.IO.TextWriter)">
|
<summary>
|
Writes the text representing the part to the <paramref name="writer"/>.
|
</summary>
|
<param name="writer">The <see cref="T:System.IO.TextWriter"/> to where the text for the part should be written to.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCheckboxPart.CheckedByDefault">
|
<summary>
|
Gets the indication of whether the checkbox should be checked by default.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCheckboxPart.ValueForOn">
|
<summary>
|
Gets the indication of whether a value for the checked state should be added.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCheckboxPart.ValueForOff">
|
<summary>
|
Gets the indication of whether a value for the unchecked state should be added.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCheckboxPart.PartTypeTemplate">
|
<summary>
|
Gest the template representing the type of the part.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmComboBoxPart">
|
<summary>
|
Represents a COMBOBOX part on an ADM template.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmEditTextPart">
|
<summary>
|
Represents an EDITTEXT part on an ADM template.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmEditTextPart.#ctor(System.String,System.String,System.String,System.String,System.Int32,System.Boolean)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmEditTextPart"/> class.
|
</summary>
|
<param name="partName">The name for the part.</param>
|
<param name="keyName">The registry key for part, or <see langword="null"/>
|
if no key name is required for the part.</param>
|
<param name="valueName">The name for the registry value for the part.</param>
|
<param name="defaultValue">The default value for the part, or <see langword="null"/>
|
if no default value is available.</param>
|
<param name="maxlen">The maximum length for the part's value.</param>
|
<param name="required">The indication of whether values for the part are required.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmEditTextPart.WritePart(System.IO.TextWriter)">
|
<summary>
|
Writes the text representing the part to the <paramref name="writer"/>.
|
</summary>
|
<param name="writer">The <see cref="T:System.IO.TextWriter"/> to where the text for the part should be written to.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmEditTextPart.DefaultValue">
|
<summary>
|
Gets the default value for the part, or <see langword="null"/>
|
if no default value is available.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmEditTextPart.Maxlen">
|
<summary>
|
Gets the maximum length for the part's value.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmEditTextPart.Required">
|
<summary>
|
Gets the indication of whether values for the part are required.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmEditTextPart.PartTypeTemplate">
|
<summary>
|
Gest the template representing the type of the part.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmComboBoxPart.WritePart(System.IO.TextWriter)">
|
<summary>
|
Writes the text representing the part to the <paramref name="writer"/>.
|
</summary>
|
<param name="writer">The <see cref="T:System.IO.TextWriter"/> to where the text for the part should be written to.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmComboBoxPart.Suggestions">
|
<summary>
|
Gets the list of suggested values for the part.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmComboBoxPart.PartTypeTemplate">
|
<summary>
|
Gest the template representing the type of the part.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContent">
|
<summary>
|
Represents the contents of an ADM template file.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContent.#ctor">
|
<summary>
|
Initializes a new empty instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContent.AddCategory(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmCategory)">
|
<summary>
|
Add a category to the content
|
</summary>
|
<param name="category">The category to add.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContent.Write(System.IO.TextWriter)">
|
<summary>
|
Writes the contents represented by the receiver to <paramref name="writer"/>.
|
</summary>
|
<param name="writer">The <see cref="T:System.IO.TextWriter"/> to where the contents should be written.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContent.Categories">
|
<summary>
|
Gets the categories.
|
</summary>
|
<value>
|
The categories.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder">
|
<summary>
|
Represents the process of building the contents of an ADM file.
|
</summary>
|
<remarks>
|
During the building process categories and policies are started and ended: several levels of nested categories
|
can be started, but only one level of policies are allowed. When a category or policy is started, it becomes the current
|
until it is ended.
|
Parts are added to the current policy; parts are not started and stopped.
|
</remarks>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AvailableValueName">
|
<summary>
|
String representing the name of the registry value that represents the availability of a configuration element.
|
</summary>
|
<remarks>
|
The value names for policies are set to this name.
|
</remarks>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.NoneListItem">
|
<summary>
|
String representing the value for a <see langword="null"/> value in a drop down list.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.#ctor">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContent)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> class.
|
</summary>
|
<param name="content">The content that will be built.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddCheckboxPart(System.String,System.String,System.Boolean)">
|
<summary>
|
Adds a checkbox part to the current policy, with values for "on" and "off" states.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="checkedByDefault">Whether the new part should be checked by default.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddCheckboxPart(System.String,System.String,System.Boolean,System.Boolean,System.Boolean)">
|
<summary>
|
Adds a checkbox part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="checkedByDefault">Whether the new part should be checked by default.</param>
|
<param name="valueForOn">Whether a value should be set for the checked state.</param>
|
<param name="valueForOff">Whether a value should be set for the unchecked state.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddCheckboxPart(System.String,System.String,System.String,System.Boolean,System.Boolean,System.Boolean)">
|
<summary>
|
Adds a checkbox part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="keyName">The registry key for the part, to override its policy's key.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="checkedByDefault">Whether the new part should be checked by default.</param>
|
<param name="valueForOn">Whether a value should be set for the checked state.</param>
|
<param name="valueForOff">Whether a value should be set for the unchecked state.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddComboBoxPart(System.String,System.String,System.String,System.Int32,System.Boolean,System.String[])">
|
<summary>
|
Adds a combo box part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="defaultValue">The default value for the new part, or <see langword="null"/> if there is no such default value.</param>
|
<param name="maxlen">The max length for the new part's values</param>
|
<param name="required">Whether values for the new part are mandatory.</param>
|
<param name="suggestions">The suggested values for the new part.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddComboBoxPart(System.String,System.String,System.String,System.String,System.Int32,System.Boolean,System.String[])">
|
<summary>
|
Adds a combo box part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="keyName">The registry key for the part, to override its policy's key.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="defaultValue">The default value for the new part, or <see langword="null"/> if there is no such default value.</param>
|
<param name="maxlen">The max length for the new part's values</param>
|
<param name="required">Whether values for the new part are mandatory.</param>
|
<param name="suggestions">The suggested values for the new part.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddDropDownListPart(System.String,System.String,System.Collections.Generic.IEnumerable{Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListItem},System.String)">
|
<summary>
|
Adds a new drop down list part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="items">The list of items to include in the new part.</param>
|
<param name="defaultValue">The default value for the new part, or <see langword="null"/> if there is no such default value.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddDropDownListPart(System.String,System.String,System.String,System.Collections.Generic.IEnumerable{Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListItem},System.String)">
|
<summary>
|
Adds a new drop down list part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="keyName">The registry key for the part, to override its policy's key.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="items">The list of items to include in the new part.</param>
|
<param name="defaultValue">The default value for the new part, or <see langword="null"/> if there is no such default value.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddDropDownListPartForEnumeration``1(System.String,System.String,``0)">
|
<summary>
|
Adds a new drop down list part to the current policy with items representing an enumeration's values.
|
</summary>
|
<typeparam name="T">The enumeration type.</typeparam>
|
<param name="partName">The name for the new part.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="defaultValue">The default value for the new part.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddDropDownListPartForEnumeration``1(System.String,System.String,System.String,``0)">
|
<summary>
|
Adds a new drop down list part to the current policy with items representing an enumeration's values.
|
</summary>
|
<typeparam name="T">The enumeration type.</typeparam>
|
<param name="partName">The name for the new part.</param>
|
<param name="keyName">The registry key for the part, to override its policy's key.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="defaultValue">The default value for the new part.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddDropDownListPartForNamedElementCollection``1(System.String,System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection{``0},System.String,System.Boolean)">
|
<summary>
|
Adds a new drop down list part to the current policy with items representing the elements in a configuration
|
elements collection.
|
</summary>
|
<typeparam name="T">The base class for the configuration elements in the collection.</typeparam>
|
<param name="partName">The name for the new part.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="elements">The collection of configuration elements.</param>
|
<param name="defaultElementName">The name for the default element, or <see langword="null"/> if there is no such default name.</param>
|
<param name="allowNone">Whether an additional entry to represent that no element is selected should be added.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
<devdoc>
|
FxCop message CA1004 is supressed because it seems like the rule does not detect the
|
existing 'elements' method parameter that uses the generic parameter T.
|
</devdoc>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddDropDownListPartForNamedElementCollection``1(System.String,System.String,System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection{``0},System.String,System.Boolean)">
|
<summary>
|
Adds a new drop down list part to the current policy with items representing the elements in a configuration
|
elements collection.
|
</summary>
|
<typeparam name="T">The base class for the configuration elements in the collection.</typeparam>
|
<param name="partName">The name for the new part.</param>
|
<param name="keyName">The registry key for the part, to override its policy's key.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="elements">The collection of configuration elements.</param>
|
<param name="defaultElementName">The name for the default element, or <see langword="null"/> if there is no such default name.</param>
|
<param name="allowNone">Whether an additional entry to represent that no element is selected should be added.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
<devdoc>
|
FxCop message CA1004 is supressed because it seems like the rule does not detect the
|
existing 'elements' method parameter that uses the generic parameter T.
|
</devdoc>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddEditTextPart(System.String,System.String,System.String,System.Int32,System.Boolean)">
|
<summary>
|
Adds a new edit text part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="defaultValue">The default value for the new part, or <see langword="null"/> if there is no such default value.</param>
|
<param name="maxlen">The max length for the new part's values</param>
|
<param name="required">Whether values for the new part are mandatory.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddEditTextPart(System.String,System.String,System.String,System.String,System.Int32,System.Boolean)">
|
<summary>
|
Adds a new edit text part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="keyName">The registry key for the part, to override its policy's key.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="defaultValue">The default value for the new part, or <see langword="null"/> if there is no such default value.</param>
|
<param name="maxlen">The max length for the new part's values</param>
|
<param name="required">Whether values for the new part are mandatory.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddNumericPart(System.String,System.String,System.Nullable{System.Int32})">
|
<summary>
|
Adds a new numeric part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="defaultValue">The default value for the new part, or <see langword="null"/> if there is no such default value.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddNumericPart(System.String,System.String,System.String,System.Nullable{System.Int32})">
|
<summary>
|
Adds a new numeric part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="keyName">The registry key for the part, to override its policy's key.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="defaultValue">The default value for the new part, or <see langword="null"/> if there is no such default value.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddNumericPart(System.String,System.String,System.String,System.Nullable{System.Int32},System.Nullable{System.Int32},System.Nullable{System.Int32})">
|
<summary>
|
Adds a new numeric part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<param name="keyName">The registry key for the part, to override its policy's key.</param>
|
<param name="valueName">The value name for the new part.</param>
|
<param name="defaultValue">The default value for the new part, or <see langword="null"/>
|
if there is no such default value.</param>
|
<param name="minValue">The minimum value, or <see langword="null"/>
|
if there is no minimum value.</param>
|
<param name="maxValue">The maximum value, or <see langword="null"/>
|
if there is no maximum value.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddPart(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart)">
|
<summary>
|
Add a part to the builder.
|
</summary>
|
<param name="part">
|
The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPart"/> to add.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.AddTextPart(System.String)">
|
<summary>
|
Adds a new text part to the current policy.
|
</summary>
|
<param name="partName">The name for the new part.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.EndCategory">
|
<summary>
|
Ends the current category.
|
</summary>
|
<remarks>
|
If the current category has a parent category, the parent category is made the current category.
|
</remarks>
|
<exception cref="T:System.InvalidOperationException">when there is no current category.</exception>
|
<exception cref="T:System.InvalidOperationException">when there is an unfinished policy being built.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.EndPolicy">
|
<summary>
|
Ends the current policy.
|
</summary>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.GetContent">
|
<summary>
|
Gets the content for the builder.
|
</summary>
|
<returns>
|
A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContent"/> object.
|
</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.StartCategory(System.String)">
|
<summary>
|
Starts a new category in the built content and makes it the current category.
|
</summary>
|
<param name="categoryName">The name for the new category</param>
|
<remarks>
|
The category is created as a child of the current category, or as a top level category if there is
|
no such current category.
|
</remarks>
|
<exception cref="T:System.InvalidOperationException">when there is an unfinished policy being built.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder.StartPolicy(System.String,System.String)">
|
<summary>
|
Starts a new policy on the current category.
|
</summary>
|
<param name="policyName">The name for the new policy.</param>
|
<param name="policyKey">The registry key for the new policy.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current category.</exception>
|
<exception cref="T:System.InvalidOperationException">when there is an unfinished policy being built.</exception>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListItem">
|
<summary>
|
Represents an item in a drop down list.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListItem.#ctor(System.String,System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListItem"/> class.
|
</summary>
|
<param name="name">The item name.</param>
|
<param name="value">The item value.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListItem.Name">
|
<summary>
|
Gets the name of the item.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListItem.Value">
|
<summary>
|
Gets the value of the item.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart">
|
<summary>
|
Represents a DROPDOWNLIST part on an ADM template.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.DropDownListTemplate">
|
<summary>
|
The drop down list template.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.ItemListStartTemplate">
|
<summary>
|
The item list start template.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.ListItemTemplate">
|
<summary>
|
The list item template.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.DefaultListItemTemplate">
|
<summary>
|
The default list item template.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.ItemListEndTemplate">
|
<summary>
|
The end list template.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.#ctor(System.String,System.String,System.String,System.Collections.Generic.IEnumerable{Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListItem},System.String)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart"/> class.
|
</summary>
|
<param name="partName">The part name.</param>
|
<param name="keyName">The key name.</param>
|
<param name="valueName">The value name.</param>
|
<param name="items">The items.</param>
|
<param name="defaultValue">The default value.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.WritePart(System.IO.TextWriter)">
|
<summary>
|
Writes the text representing the part to the <paramref name="writer"/>.
|
</summary>
|
<param name="writer">The <see cref="T:System.IO.TextWriter"/> to where the text for the part should be written to.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.DefaultValue">
|
<summary>
|
Gets the default value for the part.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.Items">
|
<summary>
|
Gets the list of name/value pairs for the part.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmDropDownListPart.PartTypeTemplate">
|
<summary>
|
Gest the template representing the type of the part.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdministrativeTemplateGenerator">
|
<summary>
|
Encapsulates the process to generate the ADM template contents to represent the configuration
|
information contained in a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>, delegating to registered
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> instances the generation of the
|
specific contents for each section.
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdministrativeTemplateGenerator.GenerateAdministrativeTemplateContent(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String,System.Collections.Generic.IDictionary{System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider})">
|
<summary>
|
Generates the ADM template contents that represent the configuration information in
|
<paramref name="configurationSource"/>
|
</summary>
|
<param name="configurationSource">The configuration source holding the configuration sections.</param>
|
<param name="applicationName">The ApplicationName to be used when generating the ADM policy keys.</param>
|
<param name="manageabilityProviders">The mapping from section names to the
|
<returns>The generated content.</returns>
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> instances that generate the ADM contents.</param>
|
<remarks>Both MACHINE and USER policies are generated.</remarks>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmNumericPart">
|
<summary>
|
Represents a NUMERIC part in an ADM template.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmNumericPart.WritePart(System.IO.TextWriter)">
|
<summary>
|
Writes the text representing the part to the <paramref name="writer"/>.
|
</summary>
|
<param name="writer">The <see cref="T:System.IO.TextWriter"/> to where the text for the part should be written to.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmNumericPart.DefaultValue">
|
<summary>
|
Gets the default value for the part, or <see langword="null"/>
|
if no default value is available.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmNumericPart.MaxValue">
|
<summary>
|
Gets the maximum value for the part, or <see langword="null"/>
|
if no maximum value is available.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmNumericPart.MinValue">
|
<summary>
|
Gets the minimum value for the part, or <see langword="null"/>
|
if no minimum value is available.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmNumericPart.PartTypeTemplate">
|
<summary>
|
Gest the template representing the type of the part.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPolicy">
|
<summary>
|
Represents a policy in an ADM template.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPolicy.KeyName">
|
<summary>
|
Gets the registry key for the policy.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPolicy.Parts">
|
<summary>
|
Gets the parts for the policy.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPolicy.Name">
|
<summary>
|
Gets the name for the policy.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmPolicy.ValueName">
|
<summary>
|
Gets the registry value name for the policy, or <see langword="null"/> if no value name is required for the policy.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmTextPart">
|
<summary>
|
Represents a TEXT part in an ADM template.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmTextPart.#ctor(System.String)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmTextPart"/> class.
|
</summary>
|
<param name="partName">
|
The name of the part.
|
</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmTextPart.PartTypeTemplate">
|
<summary>
|
Gest the template representing the type of the part.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeNotificationCoordinator">
|
<summary>
|
Represents a coordinator for configuration change notifications.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeNotificationCoordinator.AddSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Add a section handler for a section.
|
</summary>
|
<param name="sectionName">
|
The name of the section.
|
</param>
|
<param name="handler">
|
The handler to add.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeNotificationCoordinator.NotifyUpdatedSections(System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Notify updated configuration sections.
|
</summary>
|
<param name="sectionsToNotify">
|
The name of the sections to notify.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeNotificationCoordinator.RemoveSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Remove a section change handler.
|
</summary>
|
<param name="sectionName">
|
The section to remove the handler.
|
</param>
|
<param name="handler">
|
The handler to remove.
|
</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator">
|
<summary>
|
Manages the configuration file watchers for a collection of configuration sections.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.MainConfigurationFileSource">
|
<summary>
|
The main configuration file source.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.#ctor(System.String,System.Boolean)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeNotificationCoordinator"/> class.
|
</summary>
|
<param name="mainConfigurationFileName">The main configuration file.</param>
|
<param name="refresh">true to refresh configuration; otherwise, false.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.Dispose">
|
<summary>
|
Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.IsWatchingConfigSource(System.String)">
|
<summary>
|
Determines if the configuration source is being watched.
|
</summary>
|
<param name="configSource">
|
The configuration source.
|
</param>
|
<returns>
|
true if the source is being watched; otherwise, false.
|
</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.OnConfigurationChanged(System.Object,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventArgs)">
|
<summary>
|
Raises the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.ConfigurationChanged"/> event.
|
</summary>
|
<param name="sender">The sender of the event.</param>
|
<param name="args">The event arguments.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.RemoveWatcherForConfigSource(System.String)">
|
<summary>
|
Removes a watcher for the configuration source.
|
</summary>
|
<param name="configSource">
|
The source to remove the watcher.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.SetWatcherForConfigSource(System.String)">
|
<summary>
|
Sets a watcher for a configuration source.
|
</summary>
|
<param name="configSource">
|
The configuration source to watch.
|
</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.WatchedConfigSources">
|
<summary>
|
Gets a collection of watch configuration sources.
|
</summary>
|
<value>
|
A collection of watch configuration sources.
|
</value>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator.ConfigurationChanged">
|
<summary>
|
Event to notify when configuration changes.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider">
|
<summary>
|
Represents the behavior required to provide Group Policy updates for a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/>.
|
</summary>
|
<remarks>
|
Subclasses define the implementation necessary to provide manageability for a specific type of configuration
|
element.
|
Element providers are usually necessary when dealing with collections of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NameTypeConfigurationElement"/>,
|
as the concrete type of the elements in the collections is only known at runtime, and it is possible that
|
the elements are defined in 'extension' assemblies.
|
Element providers are registered with the configuration element types they provide manageability to using
|
the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderAttribute"/> attribute, which is bound to assemblies.
|
Element providers are also responsible for generating the ADM instructions that describe the policies that can be
|
used to override the values in the configuration elements. Usually the ADM instructions generated by element providers
|
consist of a single policy with parts that map to the specific configuration element instance of the type the provider
|
manages. This is not mandatory, however, and the ADM instructions generated by element providers must be consistent
|
with the ADM structure determined by the section provider that interacts with them.
|
ADM instructions must be generated for each element instance in a given context, using the elements' names to build
|
each instruction key.
|
</remarks>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderAttribute"/>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider.PolicyValueName">
|
<summary>
|
The name of the value used to hold policy enablement status.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,System.Configuration.ConfigurationElement,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM instructions that describe the policies that can be used to override the properties of
|
a specific instance of the configuration element type managed by the receiver.
|
</summary>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="configurationObject">The configuration object instance.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="parentKey">The key path for which the generated instructions' keys must be subKeys of.</param>
|
<remarks>
|
ADM instructions are generated on a per-instance basis.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider.OverrideWithGroupPolicies(System.Configuration.ConfigurationElement,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationObject"/>'s properties with the Group Policy values from the
|
registry, if any.
|
</summary>
|
<param name="configurationObject">The configuration object for instances that must be managed.</param>
|
<param name="readGroupPolicies"><see langword="true"/> if Group Policy overrides must be applied; otherwise,
|
<see langword="false"/>.</param>
|
<param name="machineKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration element at the machine level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<param name="userKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration element at the user level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<returns><see langword="true"/> if the policy settings do not disable the configuration element, otherwise
|
<see langword="false"/>.</returns>
|
<exception cref="T:System.ArgumentException">when the type of <paramref name="configurationObject"/> is not
|
the type.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider.LogExceptionWhileOverriding(System.Exception)">
|
<summary>
|
Logs an error detected while overriding a configuration object with policy values.
|
</summary>
|
<param name="exception">The exception representing the error.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderAttribute">
|
<summary>
|
Specifies which <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> must be used to provide manageability
|
for instances a given <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/> subclass.
|
</summary>
|
<remarks>
|
Manageability providers for configuration elements are registered both to the configuration element type
|
and the manageability provider for the configuration section where the configuration element resides.
|
The attribute is bound to assemblies.
|
</remarks>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderAttribute.#ctor(System.Type,System.Type,System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderAttribute"/> class.
|
</summary>
|
<param name="manageabilityProviderType">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> type.</param>
|
<param name="targetType">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/> type.
|
</param>
|
<param name="sectionManageabilityProviderType">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> type.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderAttribute.ManageabilityProviderType">
|
<summary>
|
Gets the registered <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderAttribute.TargetType">
|
<summary>
|
Gets the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/> type
|
for which the registered <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> type provides manageability.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderAttribute.SectionManageabilityProviderType">
|
<summary>
|
Gets the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> registered to manage the
|
section where the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/>
|
instances managed by the registered <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> type reside.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1">
|
<summary>
|
Provides a default implementation for <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> that
|
processes policy overrides, performing appropriate logging of
|
policy processing errors.
|
</summary>
|
<typeparam name="T">The managed configuration element type. Must inherit from <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/>.
|
</typeparam>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.#ctor">
|
<summary>
|
|
</summary>
|
<remarks>Default to ReadOnly</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,System.Configuration.ConfigurationElement,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM instructions that describe the policies that can be used to override the properties of
|
a specific instance of the configuration element type managed by the receiver.
|
</summary>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="configurationObject">The configuration object instance.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="parentKey">The key path for which the generated instructions' keys must be subKeys of.</param>
|
<remarks>
|
Class <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1"/> provides a default implementation for this method that
|
calls the strongly-typed
|
<see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)"/>
|
method.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM instructions that describe the policies that can be used to override the properties of
|
a specific instance of the configuration element type managed by the receiver.
|
</summary>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="configurationObject">The configuration object instance.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="elementPolicyKeyName">The key for the element's policies.</param>
|
<remarks>
|
The default implementation for this method creates a policy, using
|
<see cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.ElementPolicyNameTemplate"/> to create the policy name and invoking
|
<see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.AddElementAdministrativeTemplateParts(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)"/>
|
to add the policy parts.
|
Subclasses managing objects that must not create a policy must override this method to just add the parts.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.AddElementAdministrativeTemplateParts(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM parts that represent the properties of
|
a specific instance of the configuration element type managed by the receiver.
|
</summary>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="configurationObject">The configuration object instance.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="elementPolicyKeyName">The key for the element's policies.</param>
|
<remarks>
|
Subclasses managing objects that must not create a policy will likely need to include the elements' keys when creating the parts.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.AddCheckboxPartsForFlagsEnumeration``1(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,System.String,``0)">
|
<summary>
|
Adds a new drop down list part to the current policy with items representing an enumeration's values.
|
</summary>
|
<typeparam name="TEnum">The enumeration type.</typeparam>
|
<param name="contentBuilder">The content builder.</param>
|
<param name="keyName">The registry key for the part, to override its policy's key.</param>
|
<param name="defaultValue">The default value for the new part.</param>
|
<exception cref="T:System.InvalidOperationException">when there is no current policy.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.OverrideWithGroupPolicies(System.Configuration.ConfigurationElement,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationObject"/>'s properties with the Group Policy values from the
|
registry, if any.
|
</summary>
|
<param name="configurationObject">The configuration object for instances that must be managed.</param>
|
<param name="readGroupPolicies"><see langword="true"/> if Group Policy overrides must be applied; otherwise,
|
<see langword="false"/>.</param>
|
<param name="machineKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration element at the machine level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<param name="userKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration element at the user level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<returns><see langword="true"/> if the policy settings do not disable the configuration element, otherwise
|
<see langword="false"/>.</returns>
|
<exception cref="T:System.ArgumentException">when the type of <paramref name="configurationObject"/> is not
|
the type <typeparamref name="T"/>.</exception>
|
<remarks>
|
Provides a default implementation that performs appropriate logging of errors when processing
|
policy overrides.
|
</remarks>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider.OverrideWithGroupPolicies(System.Configuration.ConfigurationElement,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">ConfigurationElementManageabilityProvider.OverrideWithGroupPolicies</seealso>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.OverrideWithGroupPolicies(`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationObject"/>'s properties with the Group Policy values from the
|
registry.
|
</summary>
|
<param name="configurationObject">The configuration object for instances that must be managed.</param>
|
<param name="policyKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration element.</param>
|
<remarks>Subclasses implementing this method must retrieve all the override values from the registry
|
before making modifications to the <paramref name="configurationObject"/> so any error retrieving
|
the override values will cancel policy processing.</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.GetFlagsEnumOverride``1(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,System.String)">
|
<summary>
|
|
</summary>
|
<typeparam name="TEnum"></typeparam>
|
<param name="policyKey"></param>
|
<param name="propertyName"></param>
|
<returns></returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.ElementPolicyNameTemplate">
|
<summary>
|
Gets the template for the name of the policy associated to the object.
|
</summary>
|
<remarks>
|
Elements that override
|
<see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)"/>
|
to avoid creating a policy must still override this property.
|
</remarks>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationInstanceConfigurationAccessor">
|
<summary>
|
Represents a configuration accessor for system configuration (.NET configuration).
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IConfigurationAccessor">
|
<summary>
|
Defines an accessor for configuration.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IConfigurationAccessor.GetSection(System.String)">
|
<summary>
|
Get a configuration section based on name.
|
</summary>
|
<param name="sectionName">The name of the configuration section.</param>
|
<returns>The <see cref="T:System.Configuration.ConfigurationSection"/> for the name.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IConfigurationAccessor.RemoveSection(System.String)">
|
<summary>
|
Remove a configuration section.
|
</summary>
|
<param name="sectionName">The name of the section to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IConfigurationAccessor.GetRequestedSectionNames">
|
<summary>
|
Gets the section names for the requested configuration.
|
</summary>
|
<returns>
|
A collection of configuration names.
|
</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationInstanceConfigurationAccessor.#ctor(System.Configuration.Configuration)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationInstanceConfigurationAccessor"/> with the configuration to access.
|
</summary>
|
<param name="configuration">
|
The configuration to access.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationInstanceConfigurationAccessor.GetRequestedSectionNames">
|
<summary>
|
Gets the section names for the requested configuration.
|
</summary>
|
<returns>
|
A collection of configuration names.
|
</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationInstanceConfigurationAccessor.GetSection(System.String)">
|
<summary>
|
Get a configuration section based on name.
|
</summary>
|
<param name="sectionName">The name of the configuration section.</param>
|
<returns>The <see cref="T:System.Configuration.ConfigurationSection"/> for the name.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationInstanceConfigurationAccessor.RemoveSection(System.String)">
|
<summary>
|
Remove a configuration section.
|
</summary>
|
<param name="sectionName">The name of the section to remove.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider">
|
<summary>
|
Represents the behavior required to provide Group Policy updates for a <see cref="T:System.Configuration.ConfigurationSection"/>.
|
</summary>
|
<remarks>
|
Subclasses define the implementation necessary to provide manageability for a specific type of configuration
|
section.
|
Section providers delegate the manageability support for internal configuration elements to registered instances
|
of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> when collections of heterogeneous elements are involved
|
and the concrete type of the configuration elements is unknown in advance.
|
Section providers are registered with the configuration section name they provide manageability to using
|
the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderAttribute"/> attribute, which is bound to assemblies.
|
Section providers are also responsible for generating the ADM instructions that describe the policies that can be
|
used to override the values for all the configuration settings in the section. Usually the ADM instructions generated
|
for a section consist of a policy for block-wide settings and one policy for each configuration element in a collection;
|
however some sections might require a different structure. Manageability providers for elements in a section must be
|
consistent with the ADM structure defined by the section's manageability provider.
|
</remarks>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderAttribute"/>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.PolicyValueName">
|
<summary>
|
The name of the value used to hold policy enablement status.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.#ctor(System.Collections.Generic.IDictionary{System.Type,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider})">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> class with a
|
given set of manageability providers for the elements in the section's collections.
|
</summary>
|
<param name="providers">The mapping from configuration element type to
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/>.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,System.Configuration.ConfigurationSection,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM instructions that describe the policies that can be used to override the configuration
|
information represented by a configuration section.
|
</summary>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="configurationObject">The configuration section instance.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="applicationName">The key path for which the generated instructions' keys must be sub keys of.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.AddAdministrativeTemplateDirectivesForElement``1(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,``0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM instructions that describe the policies that can be used to override the configuration
|
information for the element using the supplied element manageability provider.
|
</summary>
|
<typeparam name="T">The base type for the configuration element.</typeparam>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="element">The configuration element.</param>
|
<param name="subProvider">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> used to append the ADM instructions
|
for the element.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="parentKey">The key path for which the generated instructions' keys must be sub keys of.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.AddElementsPolicies``1(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection{``0},Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String,System.String)">
|
<summary>
|
Adds the ADM instructions that describe the policies that can be used to override the configuration
|
information for the elements in a collection of configuration elements, using the registered element
|
manageability providers for each element.
|
</summary>
|
<remarks>
|
A new category and one policy for each element in the collection are generated; the element manageability
|
providers are responsible for generating the policies.
|
Elements for which no manageability provider is registered are ignored.
|
</remarks>
|
<typeparam name="T">The base type for the configuration elements collection.</typeparam>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="elements">The collection of configuration elements.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="parentKey">The key path for which the generated instructions' keys must be sub keys of.</param>
|
<param name="categoryName">The name for the category where the generated policies will be created.</param>
|
<devdoc>
|
FxCop message CA1004 is supressed because it seems like the rule does not detect the
|
existing 'elements' method parameter that uses the generic parameter T.
|
</devdoc>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.GetPolicyKey(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Returns the registry key that represents a policy.
|
</summary>
|
<param name="machineKey">The key for the policy on the machine tree.</param>
|
<param name="userKey">The key for the policy on the user tree.</param>
|
<returns>The <paramref name="machineKey"/> if it is not <see langword="null"/> and
|
it represents a policy; otherwise the <paramref name="machineKey"/> if it is not
|
<see langword="null"/> and it represents a policy, otherwise <see langword="null"/>.</returns>
|
<seealso cref="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.IsPolicyKey">IRegistryKey.IsPolicyKey</seealso>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.GetSubProvider(System.Type)">
|
<summary>
|
Returns the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> instance registered
|
for type <paramref name="configurationObjectType"/>.
|
</summary>
|
<param name="configurationObjectType">The configuration element type of the instance needing management.</param>
|
<returns>The manageability provider registered to manage the type, or <see langword="null"/>
|
if no provider is registered for the type.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.LoadRegistrySubKeys(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey@,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey@)">
|
<summary>
|
Utility method that loads sub keys at the machine and user level.
|
</summary>
|
<param name="subKeyName">The name of the required sub key.</param>
|
<param name="machineKey">The parent key at the machine level, or <see langword="null"/>
|
if there is no registry key.</param>
|
<param name="userKey">The parent key at the user level, or <see langword="null"/>
|
if there is no registry key.</param>
|
<param name="machineSubKey">When this method returns, contains a reference to the sub key of
|
<paramref name="machineKey"/> named <paramref name="subKeyName"/>, or <see langword="null"/>
|
if either machineKey is <see langword="null"/> or it does not have a sub key with
|
the requested name.</param>
|
<param name="userSubKey">When this method returns, contains a reference to the sub key of
|
<paramref name="userKey"/> named <paramref name="subKeyName"/>, or <see langword="null"/>
|
if either userKey is <see langword="null"/> or it does not have a sub key with
|
the requested name.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.LogExceptionWhileOverriding(System.Exception)">
|
<summary>
|
Logs an error detected while overriding a configuration object with policy values.
|
</summary>
|
<param name="exception">The exception representing the error.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.OverrideWithGroupPolicies(System.Configuration.ConfigurationSection,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationObject"/>'s and its internal configuration elements' properties
|
with the Group Policy values from the registry, if any.
|
</summary>
|
<param name="configurationObject">The configuration section that must be managed.</param>
|
<param name="readGroupPolicies"><see langword="true"/> if Group Policy overrides must be applied; otherwise,
|
<see langword="false"/>.</param>
|
<param name="machineKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the machine level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<param name="userKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the user level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<returns><see langword="true"/> if the policy settings do not disable the configuration section, otherwise
|
<see langword="false"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.OverrideWithGroupPolicies``1(``0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the properties for the configuration element.
|
</summary>
|
<typeparam name="T">The base type for the configuration elements collection.</typeparam>
|
<param name="element">The configuration element.</param>
|
<param name="subProvider">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> used to override the element's
|
properties.</param>
|
<param name="readGroupPolicies"><see langword="true"/> if Group Policy overrides must be applied; otherwise,
|
<see langword="false"/>.</param>
|
<param name="machineKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the machine level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<param name="userKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the user level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<returns><see langword="true"/> if the policy settings do not disable the configuration element, otherwise
|
<see langword="false"/>.</returns>
|
<remarks>
|
This method assumes a specific layout for the policy values: there is a registry key representing the collection
|
of elements, and a sub key with the policy values for each element. An element's sub key may also contains a value
|
stating whether the policy for an element is disabled; in that case the element is removed from the collection.
|
Such a layout for the policy values can be constructed manually, or method
|
<see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.AddElementsPolicies``1(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection{``0},Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String,System.String)"/> can be invoked during the construction
|
of the ADM template to generate it.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.OverrideWithGroupPoliciesForElementCollection``1(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection{``0},System.String,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the properties for the configuration elements in the given collection.
|
</summary>
|
<typeparam name="T">The base type for the configuration elements collection.</typeparam>
|
<param name="elements">The collection of configuration elements.</param>
|
<param name="keyName">The name of the sub key where the policy values for the elements in the collection
|
reside.</param>
|
<param name="readGroupPolicies"><see langword="true"/> if Group Policy overrides must be applied; otherwise,
|
<see langword="false"/>.</param>
|
<param name="machineKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the machine level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<param name="userKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the user level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<remarks>
|
This method assumes a specific layout for the policy values: there is a registry key representing the collection
|
of elements, and a sub key with the policy values for each element. An element's sub key may also contains a value
|
stating whether the policy for an element is disabled; in that case the element is removed from the collection.
|
Such a layout for the policy values can be constructed manually, or method
|
<see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.AddElementsPolicies``1(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedElementCollection{``0},Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String,System.String)"/> can be invoked during the construction
|
of the ADM template to generate it.
|
</remarks>
|
<devdoc>
|
FxCop message CA1004 is supressed because it seems like the rule does not detect the
|
existing 'elements' method parameter that uses the generic parameter T.
|
</devdoc>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.ReleaseRegistryKeys(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey[])">
|
<summary>
|
Utility method that closes registry keys.
|
</summary>
|
<param name="keys">The registry keys to close.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider.Providers">
|
<summary>
|
Gets the mapping from configuration element type to
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/>
|
</summary>
|
<value>
|
The mapping from configuration element type to
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/>
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderAttribute">
|
<summary>
|
Specifies which <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> must be used to provide manageability
|
for a configuration section.
|
</summary>
|
<remarks>
|
Manageability providers for configuration sections are registered to configuration section name.
|
The attribute is bound to assemblies.
|
</remarks>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderAttribute.#ctor(System.String,System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderAttribute"/> class.
|
</summary>
|
<param name="sectionName">The name of the section that needs manageability.</param>
|
<param name="manageabilityProviderType">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> type.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderAttribute.SectionName">
|
<summary>
|
Gets the name of the <see cref="T:System.Configuration.ConfigurationSection"/> for which the registered
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> type provides manageability.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderAttribute.ManageabilityProviderType">
|
<summary>
|
Gets the registered <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> type.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1">
|
<summary>
|
Provides a default base implementation for <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> that
|
processes policy override processing, performing appropriate logging of
|
policy processing errors, from policy override processing for configuration objects
|
contained by the section.
|
</summary>
|
<typeparam name="T"></typeparam>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1.#ctor(System.Collections.Generic.IDictionary{System.Type,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider})">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1"/> class with a
|
given set of manageability providers for the elements in the section's collections.
|
</summary>
|
<param name="subProviders">The mapping from configuration element type to
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/>.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,System.Configuration.ConfigurationSection,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM instructions that describe the policies that can be used to override the configuration
|
information represented by a configuration section.
|
</summary>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="configurationObject">The configuration section instance.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="applicationName">The key path for which the generated instructions' keys must be sub keys of.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM instructions that describe the policies that can be used to override the configuration
|
information represented by a configuration section.
|
</summary>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="configurationSection">The configuration section instance.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="sectionKey">The root key for the section's policies.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1.OverrideWithGroupPolicies(System.Configuration.ConfigurationSection,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationObject"/>'s and its internal configuration elements' properties
|
with the Group Policy values from the registry, if any.
|
</summary>
|
<param name="configurationObject">The configuration section that must be managed.</param>
|
<param name="readGroupPolicies"><see langword="true"/> if Group Policy overrides must be applied; otherwise,
|
<see langword="false"/>.</param>
|
<param name="machineKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the machine level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<param name="userKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the user level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<returns><see langword="true"/> if the policy settings do not disable the configuration section, otherwise
|
<see langword="false"/>.</returns>
|
<exception cref="T:System.ArgumentException">when the type of <paramref name="configurationObject"/> is not
|
the type <typeparamref name="T"/>.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1.OverrideWithGroupPoliciesForConfigurationSection(`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationSection"/>'s properties with the Group Policy values from
|
the registry.
|
</summary>
|
<param name="configurationSection">The configuration section that must be managed.</param>
|
<param name="policyKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides.</param>
|
<remarks>Subclasses implementing this method must retrieve all the override values from the registry
|
before making modifications to the <paramref name="configurationSection"/> so any error retrieving
|
the override values will cancel policy processing.</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1.OverrideWithGroupPoliciesForConfigurationElements(`0,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationSection"/>'s configuration elements' properties
|
with the Group Policy values from the registry, if any.
|
</summary>
|
<param name="configurationSection">The configuration section that must be managed.</param>
|
<param name="readGroupPolicies"><see langword="true"/> if Group Policy overrides must be applied; otherwise,
|
<see langword="false"/>.</param>
|
<param name="machineKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the machine level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<param name="userKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the user level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<remarks>Errors detected while processing policy overrides for the configuration elements in the section
|
must be logged but processing for other objects must not be interrupted.</remarks>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1.SectionCategoryName">
|
<summary>
|
Gets the name of the category that represents the whole configuration section.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProviderBase`1.SectionName">
|
<summary>
|
Gets the name of the managed configuration section.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationElementManageabilityProviderData">
|
<summary>
|
Represents the configuration settings that describe an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationElementManageabilityProviderData.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationElementManageabilityProviderData"/> class with default values.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationElementManageabilityProviderData.#ctor(System.String,System.Type,System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationElementManageabilityProviderData"/> class.
|
</summary>
|
<param name="name">The name of the configuration element.</param>
|
<param name="providerType">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> type.</param>
|
<param name="targetType">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/> type that is managed by the provider type.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationElementManageabilityProviderData.TargetType">
|
<summary>
|
Gets or sets the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NamedConfigurationElement"/> type that is managed by the provider type.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationSectionManageabilityProviderData">
|
<summary>
|
Represents the configuration settings that describe an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationSectionManageabilityProviderData.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationSectionManageabilityProviderData"/> class with default values.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationSectionManageabilityProviderData.#ctor(System.String,System.Type)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationElementManageabilityProviderData"/> class.
|
</summary>
|
<param name="sectionName">The name for the configuration section that is managed by the provider type.</param>
|
<param name="providerType">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> type.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationSectionManageabilityProviderData.ManageabilityProviders">
|
<summary>
|
Gets the collection of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationElementManageabilityProviderData"/> that represent
|
the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> instances that the
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> instance represented by the receiver might require
|
to provide manageability to configuration elements.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement">
|
<summary>
|
Represents the configuration settings that describe a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource"/>.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.MinimumApplicationNameLength">
|
<summary>
|
Represents the minimum application name length allowed.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.MaximumApplicationNameLength">
|
<summary>
|
Represents the maximumapplication name length allowed.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement"/> class with default values.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.#ctor(System.String,System.String,System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement"/> class.
|
</summary>
|
<param name="name">The instance name.</param>
|
<param name="filePath">The path to the configuration file.</param>
|
<param name="applicationName">The name that identifies the application consuming the configuration information.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.#ctor(System.String,System.String,System.String,System.Boolean)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement"/> class.
|
</summary>
|
<param name="name">The instance name.</param>
|
<param name="filePath">The path to the configuration file.</param>
|
<param name="applicationName">The name that identifies the application consuming the configuration information.</param>
|
<param name="enableGroupPolicies"><see langword="true"/> if Group Policy overrides must be appliedby the represented
|
configuration source; otherwise, <see langword="false"/>.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.CreateSource">
|
<summary>
|
Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource"/> configured with the receiver's settings.
|
</summary>
|
<returns>A new configuration source.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.OnDeserializeUnrecognizedAttribute(System.String,System.String)">
|
<summary>
|
Gets a value indicating whether an unknown attribute is encountered during deserialization.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.CreateDesignSource(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource)">
|
<summary>
|
Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource"/> configured based on this configuration element.
|
</summary>
|
<returns>Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Design.IDesignConfigurationSource"/> or null if this source does not have design-time support.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.FilePath">
|
<summary>
|
Gets or sets the file path.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.ApplicationName">
|
<summary>
|
Gets or sets the application. This is a required field.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.EnableGroupPolicies">
|
<summary>
|
Gets or sets the value for GP enablement.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageableConfigurationSourceElement.ConfigurationManageabilityProviders">
|
<summary>
|
Gets the collection of registered <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> types
|
necessary to provide manageability by the represented configuration source.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.CustomProviderDataManageabilityProvider`1">
|
<summary>
|
Base class for <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> implementations that provide manageability
|
support for custom provider's configuration.
|
</summary>
|
<typeparam name="T">The custon provider's configuration element type.</typeparam>
|
<remarks>
|
The basic configuration for a custom provider includes the provider type and a collection of attributes.
|
</remarks>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.CustomProviderDataManageabilityProvider`1.AttributesPropertyName">
|
<summary>
|
Name for the value holding the policy overrides for the custom provider's attributes.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.CustomProviderDataManageabilityProvider`1.ProviderTypePropertyName">
|
<summary>
|
Name for the value holding the policy overrides for the custom provider's type.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.CustomProviderDataManageabilityProvider`1.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.CustomProviderDataManageabilityProvider`1"/> class with a
|
policy name template.
|
</summary>
|
<param name="policyTemplate">The template to use when generating the policy associated to a custom provider
|
configuration instance.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.CustomProviderDataManageabilityProvider`1.AddElementAdministrativeTemplateParts(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM parts that represent the properties of
|
a specific instance of the configuration element type managed by the receiver.
|
</summary>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="configurationObject">The configuration object instance.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="elementPolicyKeyName">The key for the element's policies.</param>
|
<remarks>
|
Subclasses that manage custom provider's configuration objects with additional properties may
|
override this method to add the corresponding parts.
|
</remarks>
|
<seealso cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProviderBase`1.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.CustomProviderDataManageabilityProvider`1.GenerateAttributesString(System.Collections.Specialized.NameValueCollection)">
|
<summary>
|
Returns a string with the encoded key/value pairs that represent the <paramref name="attributes"/> collection.
|
</summary>
|
<param name="attributes">The collection of attributes.</param>
|
<returns>The encoded representation of the attributes collection.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.CustomProviderDataManageabilityProvider`1.OverrideWithGroupPolicies(`0,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationObject"/>'s properties with the Group Policy values from the
|
registry.
|
</summary>
|
<param name="configurationObject">The configuration object for instances that must be managed.</param>
|
<param name="policyKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration element.</param>
|
<remarks>Subclasses that manage custom provider's configuration objects with additional properties may
|
override this method to override these properties.</remarks>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.CustomProviderDataManageabilityProvider`1.ElementPolicyNameTemplate">
|
<summary>
|
Gets the template for the name of the policy associated to the object.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistration">
|
<summary>
|
Represents a Group Policy notification registration to watch Group Policy notifications.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistration.#ctor">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistration"/> object.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistration.Dispose">
|
<summary>
|
Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistration.MachinePolicyEvent">
|
<summary>
|
Gets the machine policy event.
|
</summary>
|
<value>
|
An <see cref="T:System.Threading.AutoResetEvent"/> for the machine policy.
|
</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistration.UserPolicyEvent">
|
<summary>
|
Gets the user policy event.
|
</summary>
|
<value>
|
An <see cref="T:System.Threading.AutoResetEvent"/> for the user policy.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistrationBuilder">
|
<summary>
|
Represents a builder for Group Policy notification registration.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistrationBuilder.CreateRegistration">
|
<summary>
|
Creates the registration.
|
</summary>
|
<returns>
|
A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistration"/> object.
|
</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher">
|
<summary>
|
The policy watcher can be started and stopped many times. To deal with this, when a watcher thread is started
|
it is given an 'exit' event that will be signaled when the thread needs to be stopped. Once the thread is started
|
it own the exit event, and will release it when it terminates. More than one watching thread may be active at the
|
same time, having different exit events, if the old watching thread doesn't get processing time before the new
|
thread is started; when the old thread gets to run it will consume the signaled exit event and finish.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IGroupPolicyWatcher">
|
<summary>
|
Defines a watcher for Group Policy.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IGroupPolicyWatcher.StartWatching">
|
<summary>
|
Starts watching Group Policy.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IGroupPolicyWatcher.StopWatching">
|
<summary>
|
Stops watching Group Policy.
|
</summary>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IGroupPolicyWatcher.GroupPolicyUpdated">
|
<summary>
|
The event to update the policy.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher.#ctor">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyNotificationRegistrationBuilder)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher"/> class with a registration builder.
|
</summary>
|
<param name="registrationBuilder">
|
The builder used to create the registration for Group Policy.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher.Dispose">
|
<summary>
|
Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher.Finalize">
|
<summary>
|
Allows an <see cref="T:System.Object"></see> to attempt to free resources and perform other cleanup operations before the <see cref="T:System.Object"></see> is reclaimed by garbage collection.
|
</summary>\
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher.StartWatching">
|
<summary>
|
Starts watching Group Policy.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher.StopWatching">
|
<summary>
|
Stops watching Group Policy.
|
</summary>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyWatcher.GroupPolicyUpdated">
|
<summary>
|
The event to update the policy.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.GroupPolicyUpdateDelegate">
|
<summary>
|
The delegate used to update the Group Policy based on machine.
|
</summary>
|
<param name="machine">The machine where Group Policy is updated.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IManageabilityHelper">
|
<summary>
|
Defines a helper for manageability configuration.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IManageabilityHelper.UpdateConfigurationManageability(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IConfigurationAccessor)">
|
<summary>
|
Updates configuration management from the given configuration.
|
</summary>
|
<param name="configurationAccessor">
|
The accessor for the configuration.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IManageabilityHelper.UpdateConfigurationSectionManageability(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IConfigurationAccessor,System.String)">
|
<summary>
|
Updates configuration management from the given configuration in the given section.
|
</summary>
|
<param name="configurationAccessor">
|
The accessor for the configuration.
|
</param>
|
<param name="sectionName">
|
The section to update.
|
</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey">
|
<summary>
|
Represents a key for manageability configuration implementation.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey.ApplicationName">
|
<summary>
|
Gets or sets the application name.
|
</summary>
|
<value>
|
The application name.
|
</value>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey.EnableGroupPolicies">
|
<summary>
|
Gets or sets weather to enable Group Policies.
|
</summary>
|
<value>
|
true to enable Group Policies; otherwise false.
|
</value>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey.FileName">
|
<summary>
|
Gets or sets the configuration file name.
|
</summary>
|
<value>
|
The configuration file name.
|
</value>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey.#ctor(System.String,System.String,System.Boolean)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey"/> struct.
|
</summary>
|
<param name="fileName">The configuration file name.</param>
|
<param name="applicationName">The application name.</param>
|
<param name="enableGroupPolicies">true to enable Group Policy; otherwise, false.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKeyComparer">
|
<summary>
|
A comparer for an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKeyComparer.Equals(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey)">
|
<summary>
|
Determines whether the specified objects are equal.
|
</summary>
|
|
<returns>
|
true if the specified objects are equal; otherwise, false.
|
</returns>
|
|
<param name="y">The second object of type T to compare.</param>
|
<param name="x">The first object of type T to compare.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKeyComparer.GetHashCode(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ImplementationKey)">
|
<summary>
|
Returns a hash code for the specified object.
|
</summary>
|
|
<returns>
|
A hash code for the specified object.
|
</returns>
|
|
<param name="obj">The <see cref="T:System.Object"></see> for which a hash code is to be returned.</param>
|
<exception cref="T:System.ArgumentNullException">The type of obj is a reference type and obj is null.</exception>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Installer">
|
<summary>
|
Installer for the WMI objects defined in the assembly.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.CommonWmiInstaller">
|
<summary>
|
This member supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Provides the installer for the Core library, installing WMI Events and event log sources defined for this library.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.CommonWmiInstaller.#ctor">
|
<summary>
|
Initializes the installer.
|
This member supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.CommonWmiInstaller.components">
|
<summary>
|
Required designer variable.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.CommonWmiInstaller.Dispose(System.Boolean)">
|
<summary>
|
Clean up any resources being used.
|
</summary>
|
<param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.CommonWmiInstaller.InitializeComponent">
|
<summary>
|
Required method for Designer support - do not modify
|
the contents of this method with the code editor.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider">
|
<summary>
|
Represents a instrumentation configuration section provider.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider.EventLoggingEnabledPropertyName">
|
<summary>
|
The name of the property to determine if event logging is enabled.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider.PerformanceCountersEnabledPropertyName">
|
<summary>
|
The name of the property to determine if performance counters is enabled.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider.#ctor(System.Collections.Generic.IDictionary{System.Type,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider})">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider"/> class.
|
</summary>
|
<param name="subProviders">The sub providers.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider.AddAdministrativeTemplateDirectives(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder,Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource,System.String)">
|
<summary>
|
Adds the ADM instructions that describe the policies that can be used to override the configuration
|
information represented by a configuration section.
|
</summary>
|
<param name="contentBuilder">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Adm.AdmContentBuilder"/> to which the Adm instructions are to be appended.</param>
|
<param name="configurationSection">The configuration section instance.</param>
|
<param name="configurationSource">The configuration source from where to get additional configuration
|
information, if necessary.</param>
|
<param name="sectionKey">The root key for the section's policies.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider.OverrideWithGroupPoliciesForConfigurationElements(Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationSection"/>'s configuration elements' properties
|
with the Group Policy values from the registry, if any.
|
</summary>
|
<param name="configurationSection">The configuration section that must be managed.</param>
|
<param name="readGroupPolicies"><see langword="true"/> if Group Policy overrides must be applied; otherwise,
|
<see langword="false"/>.</param>
|
<param name="machineKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the machine level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
<param name="userKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides for the
|
configuration section at the user level, or <see langword="null"/>
|
if there is no such registry key.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider.OverrideWithGroupPoliciesForConfigurationSection(Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey)">
|
<summary>
|
Overrides the <paramref name="configurationSection"/>'s properties with the Group Policy values from
|
the registry.
|
</summary>
|
<param name="configurationSection">The configuration section that must be managed.</param>
|
<param name="policyKey">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey"/> which holds the Group Policy overrides.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider.SectionCategoryName">
|
<summary>
|
Gets the name of the category that represents the whole configuration section.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.InstrumentationConfigurationSectionManageabilityProvider.SectionName">
|
<summary>
|
Gets the name of the managed configuration section.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryAccessor">
|
<summary>
|
Provides access to the registry.
|
</summary>
|
<remarks>
|
This interface allows for unit testing without requiring access to the machine's registry.
|
</remarks>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryAccessor.CurrentUser">
|
<summary>
|
Gets registry key HKCU.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryAccessor.LocalMachine">
|
<summary>
|
Gets registry key HKLM.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey">
|
<summary>
|
Provides access to a registry key sub keys and values.
|
</summary>
|
<remarks>
|
This interface allows for unit testing without requiring access to the machine's registry.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.Close">
|
<summary>
|
Closes the registry key.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.GetBoolValue(System.String)">
|
<summary>
|
Gets the Boolean value represented by the value for requested name in the registry key.
|
</summary>
|
<remarks>
|
An integer value of 1 is considered <langword>true</langword>, any other
|
value is considered <langword>false</langword>.
|
</remarks>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The Boolean value for the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not an integer representing a boolean.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.GetEnumValue``1(System.String)">
|
<summary>
|
Gets the enum value for the given name.
|
</summary>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The enum value of type <typeparamref name="T"/> represented by the value
|
for the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not an string, or it is a string value but it is not a
|
valid value name for enum type <typeparamref name="T"/>.</exception>
|
<typeparam name="T">The enum type.</typeparam>
|
<devdoc>
|
FxCop message CA1004 is supressed because the T parameter is used to drive the
|
type of the method return value, so it is not possible to provide a method
|
parameter that enables generic parameter inference.
|
</devdoc>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.GetIntValue(System.String)">
|
<summary>
|
Gets the integer value for the given name.
|
</summary>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The integer value for the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not an integer.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.GetStringValue(System.String)">
|
<summary>
|
Gets the string value for the given name.
|
</summary>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The string value for the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not a string.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.GetTypeValue(System.String)">
|
<summary>
|
Gets the <see cref="T:System.Type"/> value for the given name.
|
</summary>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The instance of <see cref="T:System.Type"/> represented by the value for
|
the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not an string, or it is a string value but it is not a
|
valid type name.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.GetValueNames">
|
<summary>
|
Gets the names for the values.
|
</summary>
|
<returns>The value names.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.OpenSubKey(System.String)">
|
<summary>
|
Gets the sub key for the given key name.
|
</summary>
|
<param name="name">The name fo the key to get.</param>
|
<returns>The sub key with the requested name if it exists; otherwise <see langword="null"/>.
|
</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.IsPolicyKey">
|
<summary>
|
Gets the indication of whether the registry key represents a policy.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryKey.Name">
|
<summary>
|
Gets the full name of the registry key.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairEncoder">
|
<summary>
|
Represents the logic to encode key/value pairs into a string of semicolon separated entries.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairEncoder.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairEncoder"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairEncoder.AppendKeyValuePair(System.String,System.String)">
|
<summary>
|
Adds a key/value pair to the encoded string being built.
|
</summary>
|
<param name="key">The key of the pair.</param>
|
<param name="value">The value of the pair.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairEncoder.GetEncodedKeyValuePairs">
|
<summary>
|
Gets the encoded key/value pairs string built.
|
</summary>
|
<returns></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairEncoder.EncodeKeyValuePair(System.String,System.String)">
|
<summary>
|
Returns a string representing a single encoded key/value pair.
|
</summary>
|
<param name="key">The key of the pair.</param>
|
<param name="value">The value of the pair.</param>
|
<returns>The encoded key/value pair.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairEncoder.EncodeKeyValuePair(System.String,System.String,System.Boolean)">
|
<summary>
|
Returns a string representing a single encoded key/value pair with semicolons escaped if
|
appropriate.
|
</summary>
|
<param name="key">The key of the pair.</param>
|
<param name="value">The value of the pair.</param>
|
<param name="escapeSemicolons"><see langword="true"/> if semicolons should be escaped;
|
otherwise <see langword="false"/>.</param>
|
<returns>The encoded key/value pair.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairParser">
|
<summary>
|
Helper class to extract a key/value pair collection from an encoded string of semicolon
|
separated key/value pairs.
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairEncoder"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairParser.ExtractKeyValueEntries(System.String,System.Collections.Generic.IDictionary{System.String,System.String})">
|
<summary>
|
Extracts the key/value pairs encoded in <paramref name="attributes"/>,
|
adding them to <paramref name="attributesDictionary"/>.
|
</summary>
|
<param name="attributes">The string where the key/value pairs are encoded.</param>
|
<param name="attributesDictionary">The dictionary where the extracted key/value pairs should be added.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.KeyValuePairParser.DecodeKeyValuePair(System.String,System.String@,System.String@)">
|
<summary>
|
|
</summary>
|
<param name="keyValue"></param>
|
<param name="key"></param>
|
<param name="value"></param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityExtensionsLogger">
|
<summary>
|
Provides logging services to the Enterprise Library Manageability Extensions.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityExtensionsLogger.LogExceptionWhileOverriding(System.Exception)">
|
<summary>
|
Logs an error detected while overriding a configuration object with policy values.
|
</summary>
|
<param name="exception">The exception representing the error.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityExtensionsLogger.LogException(System.Exception,System.String)">
|
<summary>
|
Logs an error.
|
</summary>
|
<param name="exception">The exception representing the error.</param>
|
<param name="title">The title that describes the error.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityHelper">
|
<summary>
|
Represents a manageability configuration helper.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityHelper.#ctor(System.Collections.Generic.IDictionary{System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider},System.Boolean,System.String)">
|
<summary>
|
Initialize a new instance of a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityHelper"/> class.
|
</summary>
|
<param name="manageabilityProviders">The manageability propvodiers.</param>
|
<param name="readGroupPolicies">true to read Group Policies; otherwise, false.</param>
|
<param name="applicationName">The application name.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityHelper.#ctor(System.Collections.Generic.IDictionary{System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider},System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IRegistryAccessor,System.String)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityHelper"/> class.
|
</summary>
|
<param name="manageabilityProviders">The manageability providers.</param>
|
<param name="readGroupPolicies">true to read Group Policies; otherwise, false.</param>
|
<param name="registryAccessor">A registry accessor.</param>
|
<param name="applicationName">The application name.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityHelper.BuildSectionKeyName(System.String,System.String)">
|
<summary>
|
Builds the section key name.
|
</summary>
|
<param name="applicationName">
|
The application name.
|
</param>
|
<param name="sectionName">
|
The section name.
|
</param>
|
<returns>
|
The section key name.
|
</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityHelper.UpdateConfigurationManageability(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IConfigurationAccessor)">
|
<summary>
|
Updates configuration management from the given configuration.
|
</summary>
|
<param name="configurationAccessor">
|
The accessor for the configuration.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityHelper.UpdateConfigurationSectionManageability(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IConfigurationAccessor,System.String)">
|
<summary>
|
Updates configuration management from the given configuration in the given section.
|
</summary>
|
<param name="configurationAccessor">
|
The accessor for the configuration.
|
</param>
|
<param name="sectionName">
|
The section to update.
|
</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageabilityHelper.ManageabilityProviders">
|
<summary>
|
Gets the manageability providers.
|
</summary>
|
<value>
|
The manageability providers.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource">
|
<summary>
|
Represents a configuration source that retrieves configuration information from an arbitrary file, overrides
|
the configuration information with values from the registry's Group Policy keys.
|
</summary>
|
<remarks>
|
This configuration source uses a <see cref="T:System.Configuration.Configuration"/> object to deserialize configuration, so
|
the configuration file must be a valid .NET Framework configuration file.
|
Multiple instances of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource"/> can be created with a given configuration; however
|
instances with the same configuration will share the same configuration objects.
|
</remarks>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.#ctor(System.String,System.Collections.Generic.IDictionary{System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider},System.Boolean,System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource"/> class.
|
</summary>
|
<param name="configurationFilePath">The configuration file path. The path can be absolute or relative.</param>
|
<param name="manageabilityProviders">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> that will
|
provide manageability for each configuration section.</param>
|
<param name="readGroupPolicies"><see langword="true"/> if Group Policy overrides must be applied; otherwise,
|
<see langword="false"/>.</param>
|
<param name="applicationName">The name of the running application. This name is used to look for policy overrides.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource"/> class with the implementation.
|
</summary>
|
<param name="implementation">
|
A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation"/> to use.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the configuration and saves the configuration source.
|
</summary>
|
<remarks>
|
This operation is not implemented.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.AddSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Adds a handler to be called when changes to section <code>sectionName</code> are detected.
|
This call should always be followed by a <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.RemoveSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)"/>. Failure to remove change
|
handlers will result in .NET resource leaks.
|
</summary>
|
<param name="sectionName">The name of the section to watch for.</param>
|
<param name="handler">The handler.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.GetSection(System.String)">
|
<summary>
|
Retrieves the specified <see cref="T:System.Configuration.ConfigurationSection"/>.
|
</summary>
|
<param name="sectionName">The name of the section to be retrieved.</param>
|
<returns>The specified <see cref="T:System.Configuration.ConfigurationSection"/>, or <see langword="null"/>
|
if a section by that name is not found.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.Remove(System.String)">
|
<summary>
|
Removes a <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration and saves the configuration source.
|
</summary>
|
<remarks>
|
This operation is not implemented.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.RemoveSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Remove a handler to be called when changes to section <code>sectionName</code> are detected.
|
This class should always follow a call to <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.AddSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)"/>. Failure
|
to call these methods in pairs will result in .NET resource leaks.
|
</summary>
|
<param name="sectionName">The name of the section to watch for.</param>
|
<param name="handler">The handler.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.ResetAllImplementations">
|
<summary>
|
Public for testing purposes.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.Implementation">
|
<summary>
|
Gets the implementation for configuration source.
|
</summary>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSource.SourceChanged">
|
<summary>
|
Event raised when any section in this configuration source has changed.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation">
|
<summary>
|
Represents a manageable configuration source (like Group Policy).
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation.#ctor(System.String,System.Boolean,System.Collections.Generic.IDictionary{System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider},System.Boolean,System.String)">
|
<summary>
|
Initialize a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation"/> class.
|
</summary>
|
<param name="configurationFilePath">The path to the configuration file.</param>
|
<param name="refresh">true to refresh configuration; otherwise, false.</param>
|
<param name="manageabilityProviders">The providers used for managment.</param>
|
<param name="readGroupPolicies">true to read Group Policy; otherwise, false.</param>
|
<param name="applicationName">The name of the application.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation.#ctor(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IManageabilityHelper,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IGroupPolicyWatcher,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeNotificationCoordinator)">
|
<summary>
|
Initialize a new instance o the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation"/> class.
|
</summary>
|
<param name="configurationFilePath">The configuration file path.</param>
|
<param name="manageabilityHelper">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IManageabilityHelper"/> to use.</param>
|
<param name="groupPolicyWatcher">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.IGroupPolicyWatcher"/> to use.</param>
|
<param name="watcherCoordinator">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeWatcherCoordinator"/> to use.</param>
|
<param name="notificationCoordinator">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationChangeNotificationCoordinator"/> to use.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation.AddSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Adds a change handler for a section.
|
</summary>
|
<param name="sectionName">
|
The section to add the handler.
|
</param>
|
<param name="handler">
|
The handler to add.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation.Dispose">
|
<summary>
|
Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation.GetSection(System.String)">
|
<summary>
|
Get the configuration section.
|
</summary>
|
<param name="sectionName">The section name to get.</param>
|
<returns>A <see cref="T:System.Configuration.ConfigurationSection"/> for the section name.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation.RemoveSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Removes a change handler from a section.
|
</summary>
|
<param name="sectionName">
|
The section to remove the handler.
|
</param>
|
<param name="handler">
|
The handler to remove.
|
</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation.ManageabilityHelper">
|
<summary>
|
Gets the manageability helper for the source.
|
</summary>
|
<value>
|
The manageability helper for the source.
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceSingletonHelper">
|
<summary>
|
Manages the singleton <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation"/> instance for a given
|
file name, application name and Group Policy enablement combination.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceSingletonHelper.#ctor">
|
<summary>
|
Initialzie a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceSingletonHelper"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceSingletonHelper.#ctor(System.Boolean)">
|
<summary>
|
Initialize a new instace of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceSingletonHelper"/> class.
|
</summary>
|
<param name="refresh">
|
true to support refreshing; otherwise, false.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceSingletonHelper.Dispose">
|
<summary>
|
Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceSingletonHelper.GetInstance(System.String,System.Collections.Generic.IDictionary{System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider},System.Boolean,System.String)">
|
<summary>
|
Gets a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation"/> for a configuration.
|
</summary>
|
<param name="configurationFilePath">The path to a configuration file.</param>
|
<param name="manageabilityProviders">The list of managment providers.</param>
|
<param name="readGroupPolicies">true to read Group Policies; otherwise, false.</param>
|
<param name="applicationName">The name of the application.</param>
|
<returns>A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ManageableConfigurationSourceImplementation"/> object.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ParseHelper">
|
<summary>
|
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ParseHelper.ParseEnum``1(System.String,System.Boolean)">
|
<summary>
|
|
</summary>
|
<typeparam name="T"></typeparam>
|
<param name="value"></param>
|
<param name="throwIfInvalid"></param>
|
<returns></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ParseHelper.TryParseEnum``1(System.String,``0@)">
|
<summary>
|
Attempt to parse a string into the given Enum type,
|
returning whether conversion was successful.
|
</summary>
|
<typeparam name="T">Enum type to convert to.</typeparam>
|
<param name="value">String to convert.</param>
|
<param name="result">Converted result if successful.</param>
|
<returns>true if conversion was successful, false if it failed.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ParseHelper.ParseType(System.String,System.Boolean)">
|
<summary>
|
|
</summary>
|
<param name="value"></param>
|
<param name="throwIfInvalid"></param>
|
<returns></returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources">
|
<summary>
|
A strongly-typed resource class, for looking up localized strings, etc.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ResourceManager">
|
<summary>
|
Returns the cached ResourceManager instance used by this class.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.Culture">
|
<summary>
|
Overrides the current thread's CurrentUICulture property for all
|
resource lookups using this strongly typed resource class.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ConfigurationElementNotInstrumentationConfigurationSection">
|
<summary>
|
Looks up a localized string similar to Expected an instance of InstrumentationConfigurationSection..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ConfigurationElementOfWrongType">
|
<summary>
|
Looks up a localized string similar to Expected and instance of '{0}' but got an instance of '{1}' instead..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.CustomProviderAttributesPartName">
|
<summary>
|
Looks up a localized string similar to Attributes.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.CustomProviderTypePartName">
|
<summary>
|
Looks up a localized string similar to Type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmBuildingNoCurrentCategory">
|
<summary>
|
Looks up a localized string similar to A started category is required to perform the operation..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmBuildingNoCurrentPolicy">
|
<summary>
|
Looks up a localized string similar to A started policy is required to perform the operation..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmBuildingPolicyNotFinished">
|
<summary>
|
Looks up a localized string similar to A policy construction is in process..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmBuildingProcessNotFinished">
|
<summary>
|
Looks up a localized string similar to The built content is requested but there are outstanding categories being built..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmDefaultValueAboveMaxValue">
|
<summary>
|
Looks up a localized string similar to The default value is above the max value for part '{0}' on policy '{1}': {2} versus {3}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmDefaultValueBelowMinValue">
|
<summary>
|
Looks up a localized string similar to The default value is below the min value for part '{0}' on policy '{1}': {2} versus {3}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmDefaultValueLongerThanMaxlen">
|
<summary>
|
Looks up a localized string similar to The default value for part '{0}' on policy '{1}' is longer than the max length {2}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmInvalidCharactersInRegistryKey">
|
<summary>
|
Looks up a localized string similar to Registry key path contains invalid characters or is missing parts: '{0}'.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmInvalidDefaultValue">
|
<summary>
|
Looks up a localized string similar to The default value is invalid: '{0}'.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmInvalidMaxlen">
|
<summary>
|
Looks up a localized string similar to The max len of {2} is invalid on part '{0}' for policy '{1}'. The allowed values are 0-1024..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmInvalidName">
|
<summary>
|
Looks up a localized string similar to String '{0}' is not a valid name on an ADM template..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmInvalidSuggestion">
|
<summary>
|
Looks up a localized string similar to The suggestion is invalid: '{0}'.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmMinValueLargerThanMaxValue">
|
<summary>
|
Looks up a localized string similar to Min value is larger than max value for part '{0}' on policy '{1}': {2} versus {3}..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmNumericConstraintOutsideRange">
|
<summary>
|
Looks up a localized string similar to The numeric constraint '{2}' for part '{0}' on policy '{1}' is outside the allowed range. The valued values are 0-999999999. .
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmRegistryKeyPathSegmentTooLong">
|
<summary>
|
Looks up a localized string similar to Path segment over 255 chars in length for registry key: '{0}'.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionAdmRegistryValueNameTooLong">
|
<summary>
|
Looks up a localized string similar to Registry value name over 255 chars in length: '{0}'.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionApplicationNameTooLong">
|
<summary>
|
Looks up a localized string similar to The application name cannot be longer than 255 characters..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionArgumentEmpty">
|
<summary>
|
Looks up a localized string similar to The parameter is an empty string.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionCannotLockGroupPolicy">
|
<summary>
|
Looks up a localized string similar to Group policy processing could not be locked prior to reading the registry.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionConfigurationLoadFileNotFound">
|
<summary>
|
Looks up a localized string similar to The configuration file {0} could not be found..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionErrorOnCallbackForSectionUpdate">
|
<summary>
|
Looks up a localized string similar to Exception caught from callback for change on section '{0}' calling method '{1}'.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionErrorWhileOverriding">
|
<summary>
|
Looks up a localized string similar to An error was detected while a configuration element's properties were being overriden with policy values..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionMissingRegistryValue">
|
<summary>
|
Looks up a localized string similar to There is no value with name '{1}' on key '{0}'..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionRegistryValueNotEnumValue">
|
<summary>
|
Looks up a localized string similar to The value for '{1}' on key '{0}' is not a valid value name for enum type '{2}': '{3}'.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionRegistryValueNotTypeName">
|
<summary>
|
Looks up a localized string similar to The value for '{1}' on key '{0}' is not a valid assembly qualified type name: '{2}'.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionRegistryValueOfWrongType">
|
<summary>
|
Looks up a localized string similar to The value for '{1}' on key '{0}' is not of the correct type:
|
Expected {2} but got {3} instead..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionStringNullOrEmpty">
|
<summary>
|
Looks up a localized string similar to The value can not be null or string or empty..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionUnexpectedErrorProcessingSection">
|
<summary>
|
Looks up a localized string similar to Unexpected error while processing section '{0}'.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ExceptionUnexpectedType">
|
<summary>
|
Looks up a localized string similar to The expected type '{0}' was not provided..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.GroupPolicyWatcherThread">
|
<summary>
|
Looks up a localized string similar to Group policy notification thread.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.InstrumentationSectionCategoryName">
|
<summary>
|
Looks up a localized string similar to Instrumentation.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.InstrumentationSectionEventLoggingEnabledPartName">
|
<summary>
|
Looks up a localized string similar to Event logging enabled.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.InstrumentationSectionPerformanceCountersEnabledPartName">
|
<summary>
|
Looks up a localized string similar to Performance counters enabled.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.InstrumentationSectionPolicyName">
|
<summary>
|
Looks up a localized string similar to Specify settings for the instrumentation section.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ManageableConfigurationSourceName">
|
<summary>
|
Looks up a localized string similar to Manageable Configuration Source.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.ManageableConfigurationSourceUpdateNotAvailable">
|
<summary>
|
Looks up a localized string similar to Updates to configuration through the ManageableConfigurationSource are not supported. Use the FileConfigurationSource instead..
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Properties.Resources.NoneListItem">
|
<summary>
|
Looks up a localized string similar to None.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">
|
<summary>
|
Represents an error that occurs while accessing the registry.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException"/> class with a specified error message.
|
</summary>
|
<param name="message">The message that describes the error.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException.#ctor(System.String,System.Exception)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException"/> class with a specified error message
|
and a reference to the inner exception that is the cause of this exception.
|
</summary>
|
<param name="message">The message that describes the error.</param>
|
<param name="inner">The inner exception reference.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException"/> class with serialized data.
|
</summary>
|
<param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"/> that holds the serialized object data about the exception being thrown.</param>
|
<param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"/> that contains contextual information about the source or destination.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase">
|
<summary>
|
Provides access to a registry key sub keys and values.
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.PolicyValueName">
|
<summary>
|
The name of the policy value.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.Close">
|
<summary>
|
Closes the registry key.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.DoGetValue(System.String)">
|
<summary>
|
Gets an actual value from the registry.
|
</summary>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The value from the registry, or <see langword="null"/> if
|
there is no such value.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.DoOpenSubKey(System.String)">
|
<summary>
|
Gets the sub key for the given key name.
|
</summary>
|
<param name="name">The name fo the key to get.</param>
|
<returns>The sub key with the requested name if it exists; otherwise <see langword="null"/>.
|
</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.GetBoolValue(System.String)">
|
<summary>
|
Gets the Boolean value represented by the value for requested name in the registry key.
|
</summary>
|
<remarks>
|
An integer value of 1 is considered <langword>true</langword>, any other
|
value is considered <langword>false</langword>.
|
</remarks>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The Boolean value for the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not an integer representing a Boolean.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.GetEnumValue``1(System.String)">
|
<summary>
|
Gets the enum value for the given name.
|
</summary>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The enum value of type <typeparamref name="T"/> represented by the value
|
for the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not an string, or it is a string value but it is not a
|
valid value name for enum type <typeparamref name="T"/>.</exception>
|
<typeparam name="T">The enum type.</typeparam>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.GetIntValue(System.String)">
|
<summary>
|
Gets the integer value for the given name.
|
</summary>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The integer value for the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not an integer.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.GetStringValue(System.String)">
|
<summary>
|
Gets the string value for the given name.
|
</summary>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The string value for the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not a string.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.GetTypeValue(System.String)">
|
<summary>
|
Gets the <see cref="T:System.Type"/> value for the given name.
|
</summary>
|
<param name="valueName">The name of the value to get.</param>
|
<returns>The instance of <see cref="T:System.Type"/> represented by the value for
|
the requested name in the registry key.</returns>
|
<exception cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryAccessException">when there is no value for the given name,
|
or the value exists but it is not an string, or it is a string value but it is not a
|
valid type name.</exception>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.GetValueNames">
|
<summary>
|
Gets the names for the values.
|
</summary>
|
<returns>The value names.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.OpenSubKey(System.String)">
|
<summary>
|
Gets the sub key for the given key name.
|
</summary>
|
<param name="name">The name fo the key to get.</param>
|
<returns>The sub key with the requested name if it exists; otherwise <see langword="null"/>.
|
</returns>
|
<exception cref="T:System.ArgumentNullException">when <paramref name="name"/>is <see langword="null"/>.</exception>
|
<exception cref="T:System.ArgumentException">when <paramref name="name"/>is not a valid name.</exception>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.IsPolicyKey">
|
<summary>
|
Gets the indication of whether the registry key represents a policy.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.RegistryKeyBase.Name">
|
<summary>
|
Gets the full name of the registry key.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageabilityProviderBuilder">
|
<summary>
|
Builder for manageability configuration providers.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageabilityProviderBuilder.CreateConfigurationElementManageabilityProvider(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationElementManageabilityProviderData)">
|
<summary>
|
Create a manageability configuration provider.
|
</summary>
|
<param name="manageabilityProviderData">The provdier data.</param>
|
<returns>A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationElementManageabilityProvider"/> object.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ManageabilityProviderBuilder.CreateConfigurationSectionManageabilityProvider(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.Configuration.ConfigurationSectionManageabilityProviderData)">
|
<summary>
|
Create a manageability configuration provider.
|
</summary>
|
<param name="manageabilityProviderData">The provdier data.</param>
|
<returns>A <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Manageability.ConfigurationSectionManageabilityProvider"/> object.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NullConfigurationSource">
|
<summary>
|
Represents a null configuration source that always returns null for a section.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NullConfigurationSource.GetSection(System.String)">
|
<summary>
|
Returns null for the section.
|
</summary>
|
<param name="sectionName">The section name to retrieve.</param>
|
<returns>Always <see langword="null"/>.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NullConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Null implementation of <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Add(System.String,System.Configuration.ConfigurationSection)"/> that
|
ignores the request.
|
</summary>
|
<param name="sectionName">The name by which the <paramref name="configurationSection"/> should be added.</param>
|
<param name="configurationSection">The configuration section to add.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NullConfigurationSource.Remove(System.String)">
|
<summary>
|
Null implementation of <see cref="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource.Remove(System.String)"/> that
|
ignores the request.
|
</summary>
|
<param name="sectionName">The name of the section to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NullConfigurationSource.AddSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Adds a handler to be called when changes to section <code>sectionName</code> are detected.
|
</summary>
|
<param name="sectionName">The name of the section to watch for.</param>
|
<param name="handler">The handler.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NullConfigurationSource.RemoveSectionChangeHandler(System.String,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationChangedEventHandler)">
|
<summary>
|
Remove a handler to be called when changes to section <code>sectionName</code> are detected.
|
</summary>
|
<param name="sectionName">The name of the section to watch for.</param>
|
<param name="handler">The handler.</param>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.NullConfigurationSource.SourceChanged">
|
<summary>
|
Event raised when configuration source contents have changed.
|
</summary>
|
<remarks>This class never raises this event.</remarks>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher">
|
<summary>
|
<para>Represents an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.IConfigurationChangeWatcher"/> that watches a file.</para>
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher">
|
<summary>
|
<para>Represents an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.IConfigurationChangeWatcher"/> that watches a file.</para>
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.IConfigurationChangeWatcher">
|
<summary>
|
<para>Provides a way to watch for changes to configuration in storage.</para>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.IConfigurationChangeWatcher.StartWatching">
|
<summary>
|
When implemented by a subclass, starts the object watching for configuration changes
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.IConfigurationChangeWatcher.StopWatching">
|
<summary>
|
When implemented by a subclass, stops the object from watching for configuration changes
|
</summary>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.IConfigurationChangeWatcher.ConfigurationChanged">
|
<summary>
|
Event raised when the underlying persistence mechanism for configuration notices that
|
the persistent representation of configuration information has changed.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.IConfigurationChangeWatcher.SectionName">
|
<summary>
|
When implemented by a subclass, returns the section name that is being watched.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.SetDefaultPollDelayInMilliseconds(System.Int32)">
|
<summary>
|
Sets the default poll delay.
|
</summary>
|
<param name="newDefaultPollDelayInMilliseconds">The new default poll.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.ResetDefaultPollDelay">
|
<summary>
|
Reset the default to 15000 millisecond.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.SetPollDelayInMilliseconds(System.Int32)">
|
<summary>
|
Sets the poll delay in milliseconds.
|
</summary>
|
<param name="newDelayInMilliseconds">
|
The poll delay in milliseconds.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.#ctor">
|
<summary>
|
<para>Initialize a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher"/> class</para>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.Finalize">
|
<summary>
|
<para>
|
Allows an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher"/> to attempt to free
|
resources and perform other cleanup operations before the
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher"/> is reclaimed by garbage collection.
|
</para>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.StartWatching">
|
<summary>
|
<para>Starts watching the configuration file.</para>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.StopWatching">
|
<summary>
|
<para>Stops watching the configuration file.</para>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.Dispose">
|
<summary>
|
<para>Releases the unmanaged resources used by the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher"/> and optionally releases the managed resources.</para>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.Disposing(System.Boolean)">
|
<summary>
|
<para>Releases the unmanaged resources used by the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher"/> and optionally releases the managed resources.</para>
|
</summary>
|
<param name="isDisposing">
|
<para><see langword="true"/> to release both managed and unmanaged resources; <see langword="false"/> to release only unmanaged resources.</para>
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.OnConfigurationChanged">
|
<summary>
|
<para>Raises the <see cref="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.ConfigurationChanged"/> event.</para>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.GetCurrentLastWriteTime">
|
<summary>
|
<para>Returns the <see cref="T:System.DateTime"/> of the last change of the information watched</para>
|
</summary>
|
<returns>The <see cref="T:System.DateTime"/> of the last modificaiton, or <code>DateTime.MinValue</code> if the information can't be retrieved</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.BuildEventData">
|
<summary>
|
Builds the change event data, in a suitable way for the specific watcher implementation
|
</summary>
|
<returns>The change event information</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.GetEventSourceName">
|
<summary>
|
Returns the source name to use when logging events
|
</summary>
|
<returns>The event source name</returns>
|
</member>
|
<member name="E:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.ConfigurationChanged">
|
<summary>
|
Event raised when the underlying persistence mechanism for configuration notices that
|
the persistent representation of configuration information has changed.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeWatcher.SectionName">
|
<summary>
|
<para>Gets the name of the configuration section being watched.</para>
|
</summary>
|
<value>
|
<para>The name of the configuration section being watched.</para>
|
</value>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher.#ctor(System.String,System.String)">
|
<summary>
|
<para>Initialize a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher"/> class with the path to the configuration file and the name of the section</para>
|
</summary>
|
<param name="configFilePath">
|
<para>The full path to the configuration file.</para>
|
</param>
|
<param name="configurationSectionName">
|
<para>The name of the configuration section to watch.</para>
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher.Finalize">
|
<summary>
|
<para>Allows an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher"/> to attempt to free resources and perform other cleanup operations before the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher"/> is reclaimed by garbage collection.</para>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher.GetCurrentLastWriteTime">
|
<summary>
|
<para>Returns the <see cref="T:System.DateTime"/> of the last change of the information watched</para>
|
<para>The information is retrieved using the watched file modification timestamp</para>
|
</summary>
|
<returns>The <see cref="T:System.DateTime"/> of the last modificaiton, or <code>DateTime.MinValue</code> if the information can't be retrieved</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher.BuildEventData">
|
<summary>
|
Builds the change event data, including the full path of the watched file
|
</summary>
|
<returns>The change event information</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher.GetEventSourceName">
|
<summary>
|
Returns the source name to use when logging events
|
</summary>
|
<returns>The event source name</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Storage.ConfigurationChangeFileWatcher.SectionName">
|
<summary>
|
<para>Gets the name of the configuration section being watched.</para>
|
</summary>
|
<value>
|
<para>The name of the configuration section being watched.</para>
|
</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource">
|
<summary>
|
Represents an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> that retrieves the configuration information from the
|
application's default configuration file using the <see cref="T:System.Configuration.ConfigurationManager"/> API.
|
</summary>
|
<remarks>
|
<para>
|
The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource"/> is a wrapper over the static configuration access API provided by
|
<see cref="T:System.Configuration.ConfigurationManager"/> and watches for changes in the configuration files to refresh the
|
configuration when a change is detected.
|
</para>
|
</remarks>
|
<seealso cref="T:System.Configuration.ConfigurationManager"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource"/> class.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource.#ctor(System.Boolean)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource"/> class that will refresh changes
|
according to the value of the <paramref name="refresh"/> parameter.
|
</summary>
|
<param name="refresh"><see langword="true"/> if changes to the configuration file should be notified.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource.#ctor(System.Boolean,System.Int32)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource"/> class that will refresh changes
|
according to the value of the <paramref name="refresh"/> parameter, polling every
|
<paramref name="refreshInterval"/> milliseconds.
|
</summary>
|
<param name="refresh"><see langword="true"/> if changes to the configuration file should be notified.</param>
|
<param name="refreshInterval">The poll interval in milliseconds.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource.DoAdd(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
Adds a <see cref="T:System.Configuration.ConfigurationSection"/> to the configuration and saves the configuration source.
|
</summary>
|
<remarks>
|
If a configuration section with the specified name already exists it will be replaced.
|
</remarks>
|
<param name="sectionName">The name by which the <paramref name="configurationSection"/> should be added.</param>
|
<param name="configurationSection">The configuration section to add.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource.DoRemove(System.String)">
|
<summary>
|
Removes a <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration and saves the configuration source.
|
</summary>
|
<param name="sectionName">The name of the section to remove.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource.Save(System.String,System.Configuration.ConfigurationSection)">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
Adds or replaces <paramref name="configurationSection"/> under name <paramref name="section"/> in the configuration
|
and saves the configuration file.
|
</summary>
|
<param name="section">The name for the section.</param>
|
<param name="configurationSection">The configuration section to add or replace.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource.DoGetSection(System.String)">
|
<summary>
|
Retrieves the specified <see cref="T:System.Configuration.ConfigurationSection"/> from the configuration file.
|
</summary>
|
<param name="sectionName">The section name.</param>
|
<returns>The section, or <see langword="null"/> if it doesn't exist.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource.RefreshAndValidateSections(System.Collections.Generic.IDictionary{System.String,System.String},System.Collections.Generic.IDictionary{System.String,System.String},System.Collections.Generic.ICollection{System.String}@,System.Collections.Generic.IDictionary{System.String,System.String}@)">
|
<summary>
|
Refreshes the configuration sections from the main configuration file and determines which sections have
|
suffered notifications and should be notified to registered handlers.
|
</summary>
|
<param name="localSectionsToRefresh">A dictionary with the configuration sections residing in the main
|
configuration file that must be refreshed.</param>
|
<param name="externalSectionsToRefresh">A dictionary with the configuration sections residing in external
|
files that must be refreshed.</param>
|
<param name="sectionsToNotify">A new collection with the names of the sections that suffered changes and
|
should be notified.</param>
|
<param name="sectionsWithChangedConfigSource">A new dictionary with the names and file names of the sections
|
that have changed their location.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource.RefreshExternalSections(System.Collections.Generic.IEnumerable{System.String})">
|
<summary>
|
Refreshes the configuration sections from an external configuration file.
|
</summary>
|
<param name="sectionsToRefresh">A collection with the names of the sections that suffered changes and should
|
be refreshed.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSourceElement">
|
<summary>
|
Represents the configuration settings that describe an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSourceElement.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSourceElement"/> class with default values.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSourceElement.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSourceElement"/> class with a name and an type.
|
</summary>
|
<param name="name">The instance name.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSourceElement.CreateSource">
|
<summary>
|
Returns a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource"/>.
|
</summary>
|
<returns>A new configuration source.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement">
|
<summary>
|
Contains settings specific to the registration of a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/>.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement.SectionName">
|
<summary>
|
The section name used to retrieve the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/> if available.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement.ProviderTypeName">
|
<summary>
|
The name of the type that implements <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider"/>.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElementCollection">
|
<summary>
|
Contains a collection of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElement"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElementCollection.#ctor">
|
<summary>
|
Creates a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.TypeRegistrationProviderElementCollection"/>.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.EnterpriseLibraryBlockExtension">
|
<summary>
|
Base class for Enterprise Library Blocks' container extensions.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.EnterpriseLibraryBlockExtension.Initialize">
|
<summary>
|
Ensure that this container has been configured to resolve Enterprise Library
|
objects.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.EnterpriseLibraryCoreExtension">
|
<summary>
|
Main <see cref="T:Microsoft.Practices.Unity.UnityContainerExtension"/> for Enterprise Library.
|
</summary>
|
<remarks>
|
This extension configures its container to resolve all Enterprise Library
|
objects. It's a convienence method to save having to manually create a
|
<see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.Unity.UnityContainerConfigurator"/> object and configure it yourself.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.EnterpriseLibraryCoreExtension.#ctor">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.EnterpriseLibraryCoreExtension"/> class with the
|
default <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.EnterpriseLibraryCoreExtension.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Initializes a new instance of the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.EnterpriseLibraryCoreExtension"/> class with the
|
the specified <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>.
|
</summary>
|
<param name="configurationSource">The <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> to use when retrieving
|
configuration information.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.EnterpriseLibraryCoreExtension.Initialize">
|
<summary>
|
Configures the Unity container to be able to resolve Enterprise Library
|
objects.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnterpriseLibraryContainer">
|
<summary>
|
Entry point for the container infrastructure for Enterprise Library.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnterpriseLibraryContainer.ConfigureContainer(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerConfigurator,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Read the current Enterprise Library configuration in the given <paramref name="configSource"/>
|
and supply the corresponding type information to the <paramref name="configurator"/>.
|
</summary>
|
<param name="configurator"><see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerConfigurator"/> object used to consume the configuration
|
information.</param>
|
<param name="configSource">Configuration information.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnterpriseLibraryContainer.ConfigureContainer(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.ITypeRegistrationsProvider,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerConfigurator,Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Read the current Enterprise Library configuration in the given <paramref name="configSource"/>
|
and supply the corresponding type information to the <paramref name="configurator"/>.
|
</summary>
|
<param name="locator"><see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.TypeRegistrationsProvider"/> used to identify what information
|
to pull from the configuration file.</param>
|
<param name="configurator"><see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ContainerModel.IContainerConfigurator"/> object used to consume the configuration
|
information.</param>
|
<param name="configSource">Configuration information.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnterpriseLibraryContainer.CreateDefaultContainer">
|
<summary>
|
Create a new instance of <see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> that has been configured
|
with the information in the default <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/>
|
</summary>
|
<returns>The <see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> object.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnterpriseLibraryContainer.CreateDefaultContainer(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Create a new instance of <see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> that has been configured
|
with the information in the given <paramref name="configurationSource"/>.
|
</summary>
|
<param name="configurationSource"><see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource"/> containing Enterprise Library
|
configuration information.</param>
|
<returns>The <see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> object.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.EnterpriseLibraryContainer.Current">
|
<summary>
|
Get or set the current container used to resolve Entlib objects (for use by the
|
various static factories).
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.ReaderWriterLockExtension">
|
<summary>
|
Provides Reader/Writer lock logic to allow reconfiguring of the container.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.ReaderWriterLockExtension.Initialize">
|
<summary>
|
Initial the container with this extension's functionality.
|
</summary>
|
<remarks>
|
When overridden in a derived class, this method will modify the given
|
<see cref="T:Microsoft.Practices.Unity.ExtensionContext"/> by adding strategies, policies, and so forth. to
|
install it's functions into the container.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.ReaderWriterLockExtension.EnterWriteLock">
|
<summary>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.ReaderWriterLockExtension.ExitWriteLock">
|
<summary>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.ReaderWriterLockExtension.ReaderWriterLockStrategy.PreBuildUp(Microsoft.Practices.ObjectBuilder2.IBuilderContext)">
|
<summary>
|
Called during the chain of responsibility for a build operation. The
|
PreBuildUp method is called when the chain is being executed in the
|
forward direction.
|
</summary>
|
<param name="context">Context of the build operation.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.ReaderWriterLockExtension.ReaderWriterLockStrategy.PostBuildUp(Microsoft.Practices.ObjectBuilder2.IBuilderContext)">
|
<summary>
|
Called during the chain of responsibility for a build operation. The
|
PostBuildUp method is called when the chain has finished the PreBuildUp
|
phase and executes in reverse order from the PreBuildUp calls.
|
</summary>
|
<param name="context">Context of the build operation.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.TransientPolicyBuildUpExtension">
|
<summary>
|
Container extension that allows for supplying additional, transient policies while building up an object
|
through a container.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.TransientPolicyBuildUpExtension.Initialize">
|
<summary>
|
Initializes the container with this extension's functionality.
|
</summary>
|
<remarks>
|
This extension does not permfom any initialization.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.TransientPolicyBuildUpExtension.BuildUp(System.Type,System.Object,System.String,Microsoft.Practices.Unity.InjectionMember[])">
|
<summary>
|
Run an existing object through the container and perform injection on it.
|
</summary>
|
<param name="t"><see cref="T:System.Type"/> of object to perform injection on.</param>
|
<param name="existing">Instance to build up.</param>
|
<param name="name">Name to use when looking up the typemappings and other configurations.</param>
|
<param name="injectionMembers">Providers for transient policies to use.</param>
|
<returns>The resulting object. By default, this will be object supplied in the <paramref name="existing"/>
|
parameter, but container extensions may add things like automatic proxy creation which would cause this to
|
return a different object (but still type compatible with t).</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.UnityContainerExtensions">
|
<summary>
|
Extension methods on <see cref="T:Microsoft.Practices.Unity.IUnityContainer"/> that provides
|
some convenience wrappers.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.UnityContainerExtensions.AddExtensionIfNotPresent(Microsoft.Practices.Unity.IUnityContainer,Microsoft.Practices.Unity.UnityContainerExtension)">
|
<summary>
|
Add a new extension to the given <paramref name="container"/>, only
|
if the extension hasn't already been added to the container.
|
</summary>
|
<param name="container">The container to add the extension to.</param>
|
<param name="extension">The extension object.</param>
|
<returns><paramref name="container"/></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity.UnityContainerExtensions.AddNewExtensionIfNotPresent``1(Microsoft.Practices.Unity.IUnityContainer)">
|
<summary>
|
Add a new extension to the given <paramref name="container"/>, only
|
if the extension hasn't already been added to the container.
|
</summary>
|
<typeparam name="TExtension">Type of extension to add.</typeparam>
|
<param name="container">Container to add the extension to.</param>
|
<returns><paramref name="container"/></returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AbstractInstallerBuilder">
|
<summary>
|
Base class for the reflection-based installers. These reflection-based installers
|
search through assemblies looking for the appropriate kinds of installable resources and
|
arrange for them to be registered with the appropriate installer
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AbstractInstallerBuilder.Fill(System.Configuration.Install.Installer)">
|
<summary>
|
Fills the given installer with other, more specific kinds of installers that have been
|
filled with the appropriate kinds of installable resources
|
</summary>
|
<param name="installer">Outer installer to be filled with nested installers for specific resources</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AbstractInstallerBuilder.#ctor(System.Type[],System.Type)">
|
<summary>
|
Initializes object by giving it access to an array of all available types and a specification of
|
the more specific resource type that will be installed.
|
</summary>
|
<param name="availableTypes">Array of available types through which installer should look</param>
|
<param name="instrumentationAttributeType">Attribute specifying the more specific resource type to search for</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AbstractInstallerBuilder.ConfirmAttributeExists(System.Type,System.Type)">
|
<summary>
|
Helper method to determine if the given type is attributed with the necessary attributes to be installed
|
for a given installer
|
</summary>
|
<param name="instrumentedType">Type in question</param>
|
<param name="attributeType">More specific attribute used to match resource being installed</param>
|
<returns>True if the attributes on the given <paramref name="instrumentedType"></paramref> matches <paramref name="attributeType"></paramref></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AbstractInstallerBuilder.IsInstrumented(System.Type,System.Type)">
|
<summary>
|
Helper method to determine if the attributes for a given type match the attributes used to
|
specify a specific kind of installable resource. The type should be attributed with <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.HasInstallableResourcesAttribute"></see>
|
and the attribute passed to this method call.
|
</summary>
|
<param name="instrumentedType">Type in question</param>
|
<param name="instrumentedAttributeType">More specific attribute used to match resource being installed</param>
|
<returns><b>true</b> if the type specifies intallable resources.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AbstractInstallerBuilder.CreateInstallers(System.Collections.Generic.ICollection{System.Type})">
|
<summary>
|
Creates one or more installers after iterating over the <paramref name="instrumentedTypes"></paramref>.
|
The number of iterators returned depends on the specific needs of the particular installable type.
|
</summary>
|
<returns>Collection of installers created through iterating over included types</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.AbstractInstallerBuilder.InstrumentedTypes">
|
<summary>
|
Gets or sets a list of all instrumentented types found in a given assembly. Types are instrumented if they are
|
attributed with <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.HasInstallableResourcesAttribute"></see> and another attribute specifying
|
another, more specific resource type.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection">
|
<summary>
|
Configuration object for Instrumentation. This section defines the instrumentation behavior
|
for the entire application
|
</summary>
|
</member>
|
<member name="F:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection.SectionName">
|
<summary>
|
Section name
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection.#ctor(System.Boolean,System.Boolean)">
|
<summary>
|
Initializes enabled state of the three forms of instrumentation
|
</summary>
|
<param name="performanceCountersEnabled">True if performance counter instrumentation is to be enabled</param>
|
<param name="eventLoggingEnabled">True if event logging instrumentation is to be enabled</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection.#ctor(System.Boolean,System.Boolean,System.String)">
|
<summary>
|
Initializes enabled state of the three forms of instrumentation and the instance name
|
</summary>
|
<param name="performanceCountersEnabled">True if performance counter instrumentation is to be enabled</param>
|
<param name="eventLoggingEnabled">True if event logging instrumentation is to be enabled</param>
|
<param name="applicationInstanceName">Value of the InstanceName</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection.#ctor">
|
<summary>
|
Initializes object to default settings of all instrumentation types disabled and an empty InstanceName
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection.GetSection(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSource)">
|
<summary>
|
Retrieve the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection"/> from the given configuratio source.
|
If the source is null, or does not contain an instrumentation section, then return a default
|
section with instrumentation turned off.
|
</summary>
|
<param name="configurationSource">Configuration source containing section (or not).</param>
|
<returns>The configuration section.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection.OnDeserializeUnrecognizedAttribute(System.String,System.String)">
|
<summary>
|
Gets a value indicating whether an unknown attribute is encountered during deserialization.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection.PerformanceCountersEnabled">
|
<summary>
|
Gets and sets the value of PerformanceCountersEnabled
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection.EventLoggingEnabled">
|
<summary>
|
Gets and sets the value of EventLoggingEnabled
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.Configuration.InstrumentationConfigurationSection.ApplicationInstanceName">
|
<summary>
|
Gets and sets value of ApplicationInstanceName
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilderExtensions">
|
<summary>
|
Provides instrumentation specific configuration extensions to <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder"/>
|
</summary>
|
<seealso cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilder"/>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceBuilderExtensions.ConfigureInstrumentation(Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder)">
|
<summary>
|
Configure Instrumentation for Enterprise Library.
|
</summary>
|
<param name="configurationSourceBuilderRoot">Extends the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IConfigurationSourceBuilder"/></param>
|
<returns></returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IInstrumentationConfiguration">
|
<summary>
|
Defines instrumentation configuration options.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IInstrumentationConfiguration.EnableLogging">
|
<summary>
|
Enable logging
|
</summary>
|
<returns></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IInstrumentationConfiguration.EnablePerformanceCounters">
|
<summary>
|
Enable performance counters for instrumentation
|
</summary>
|
<returns></returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Configuration.IInstrumentationConfiguration.ForApplicationInstance(System.String)">
|
<summary>
|
Set application instance for instrumentation.
|
</summary>
|
<param name="application"></param>
|
<returns></returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounterFactory">
|
<summary>
|
Factory for <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter"></see>s. Individual <see cref="T:System.Diagnostics.PerformanceCounter"></see>
|
instances are cached to prevent the same instance from being created multiple times.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounterFactory.CreateCounter(System.String,System.String,System.String[])">
|
<summary>
|
Creates an <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounter"></see> initialized with individual <see cref="T:System.Diagnostics.PerformanceCounter"></see>
|
instances. Instances are named according to <paramref name="instanceNames"></paramref> passed to this method.
|
</summary>
|
<param name="categoryName">Performance counter category name, as defined during installation.</param>
|
<param name="counterName">Performance counter name, as defined during installation.</param>
|
<param name="instanceNames">Param array of instance names for which individual counters should be created.</param>
|
<returns>The new counter instance.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EnterpriseLibraryPerformanceCounterFactory.ClearCachedCounters">
|
<summary>
|
This method supports the Enterprise Library infrastructure and is not intended to be used directly from your code.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogDefinitionAttribute">
|
<summary>
|
Defines an event source to be installed by the reflection based installer system. Each field
|
in this attribute is a placeholder for the same field as defined in the <see cref="T:System.Diagnostics.EventLogInstaller"></see>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogDefinitionAttribute.#ctor(System.String,System.String)">
|
<summary>
|
Initializes this object with the event log name and source to be installed.
|
</summary>
|
<param name="logName">Event log name to which the source should be added.</param>
|
<param name="sourceName">Event log source to be added.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogDefinitionAttribute.LogName">
|
<summary>
|
Gets the event log name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogDefinitionAttribute.SourceName">
|
<summary>
|
Gets the event source name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogDefinitionAttribute.CategoryCount">
|
<summary>
|
Gets and sets the category count.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogDefinitionAttribute.CategoryResourceFile">
|
<summary>
|
Gets the category resource file name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogDefinitionAttribute.MessageResourceFile">
|
<summary>
|
Gets and sets the message resource file name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogDefinitionAttribute.ParameterResourceFile">
|
<summary>
|
Gets and sets the parameter resource file name
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogEntryFormatter">
|
<summary>
|
Formats an event log entry to the defined format.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.IEventLogEntryFormatter">
|
<summary>
|
Formats an event log entry for logging to event log.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.IEventLogEntryFormatter.GetEntryText(System.String,System.String[])">
|
<overloads>
|
Creates a formatted message, suitable for logging to the event log.
|
</overloads>
|
<summary>
|
Creates a formatted message, suitable for logging to the event log.
|
</summary>
|
<param name="message">Message to be formatted, with format tags embedded.</param>
|
<param name="extraInformation">Extra strings to be matched up with the format tags provided in <paramref name="message"></paramref>.</param>
|
<returns>Formatted message, suitable for logging to the event log.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.IEventLogEntryFormatter.GetEntryText(System.String,System.Exception,System.String[])">
|
<summary>
|
Creates a formatted message, suitable for logging to the event log.
|
</summary>
|
<param name="message">Message to be formatted, with format tags embedded.</param>
|
<param name="exception">Exception containing message text to be added to event log message produced by this method</param>
|
<param name="extraInformation">Extra strings to be matched up with the format tags provided in <paramref name="message"></paramref>.</param>
|
<returns>Formatted message, suitable for logging to the event log.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogEntryFormatter.#ctor(System.String)">
|
<overloads>
|
Initializes this object with the name of the specific block using this class.
|
</overloads>
|
<summary>
|
Initializes this object with the name of the specific block using this class.
|
</summary>
|
<param name="blockName">Name of block using this functionality.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogEntryFormatter.#ctor(System.String,System.String)">
|
<summary>
|
Initializes this object with the given application and block names.
|
</summary>
|
<param name="applicationName">Name of the application.</param>
|
<param name="blockName">Name of the block using this functionality.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogEntryFormatter.GetEntryText(System.String,System.String[])">
|
<overloads>
|
Creates a formatted message, suitable for logging to the event log.
|
</overloads>
|
<summary>
|
Creates a formatted message, suitable for logging to the event log.
|
</summary>
|
<param name="message">Message to be formatted, with format tags embedded.</param>
|
<param name="extraInformation">Extra strings to be matched up with the format tags provided in <paramref name="message"></paramref>.</param>
|
<returns>Formatted message, suitable for logging to the event log.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogEntryFormatter.GetEntryText(System.String,System.Exception,System.String[])">
|
<summary>
|
Creates a formatted message, suitable for logging to the event log.
|
</summary>
|
<param name="message">Message to be formatted, with format tags embedded.</param>
|
<param name="exception">Exception containing message text to be added to event log message produced by this method</param>
|
<param name="extraInformation">Extra strings to be matched up with the format tags provided in <paramref name="message"></paramref>.</param>
|
<returns>Formatted message, suitable for logging to the event log.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogInstallerBuilder">
|
<summary>
|
Add event log source definitions for classes that have been attributed
|
with HasInstallableResourceAttribute and EventLogDefinition attributes to EventLogInstallers.
|
One installer is created for each unique event log source that is found.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogInstallerBuilder.#ctor(System.Type[])">
|
<summary>
|
Initializes this object with a list of <see cref="T:System.Type"></see>s that may potentially be attributed appropriately.
|
</summary>
|
<param name="potentialTypes">Array of types to inspect check for event log sources needing installation</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.EventLogInstallerBuilder.CreateInstallers(System.Collections.Generic.ICollection{System.Type})">
|
<summary>
|
Creates <see cref="T:System.Diagnostics.EventLogInstaller"></see> instances for each separate event log source needing installation.
|
</summary>
|
<param name="instrumentedTypes">Collection of <see cref="T:System.Type"></see>s that represent types defining
|
event log sources to be installed.</param>
|
<returns>Collection of installers containing event log sources to be installed.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener">
|
<summary>
|
Listens for events raised by block classes and reports them to appropriate instrumentation
|
services (EventLog, or PeformanceCounters).
|
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener.#ctor(System.Boolean,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.IPerformanceCounterNameFormatter)">
|
<summary>
|
Base constructor for <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener"></see>.
|
</summary>
|
<overloads>
|
Base constructor for <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener"></see>.
|
</overloads>
|
<param name="performanceCountersEnabled">True if performance counter reporting is enabled</param>
|
<param name="eventLoggingEnabled">True if event logging is enabled</param>
|
<param name="nameFormatter">Creates unique name for each <see cref="T:System.Diagnostics.PerformanceCounter"/> instance.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener.#ctor(System.String,System.Boolean,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.IPerformanceCounterNameFormatter)">
|
<summary>
|
Base constructor for <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener"></see>.
|
</summary>
|
<param name="instanceName">Unique name for this instance</param>
|
<param name="performanceCountersEnabled">True if performance counter reporting is enabled</param>
|
<param name="eventLoggingEnabled">True if event logging is enabled</param>
|
<param name="nameFormatter">Creates unique name for each <see cref="T:System.Diagnostics.PerformanceCounter"/> instance.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener.#ctor(System.String[],System.Boolean,System.Boolean,Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.IPerformanceCounterNameFormatter)">
|
<summary>
|
Base constructor for <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener"></see>.
|
</summary>
|
<param name="instanceNames">Unique names for th <see cref="T:System.Diagnostics.PerformanceCounter"></see> instances to be managed by this listener.</param>
|
<param name="performanceCountersEnabled">True if performance counter reporting is enabled</param>
|
<param name="eventLoggingEnabled">True if event logging is enabled</param>
|
<param name="nameFormatter">Creates unique name for each <see cref="T:System.Diagnostics.PerformanceCounter"/> instance.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener.GetEventSourceName">
|
<summary>
|
Gets the event source name as defined in the class metadata.
|
</summary>
|
<returns>The event source name.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener.CreatePerformanceCounters(System.String[])">
|
<summary>
|
Initializes the performance counter instances managed by this listener.
|
</summary>
|
<param name="instanceNames">Instance names for performance counters.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener.CreateInstanceName(System.String)">
|
<summary>
|
Creates a unique name for a specific performance counter instance.
|
</summary>
|
<param name="nameSuffix">Instance name for a specific performance counter.</param>
|
<returns>The created instance name.</returns>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener.EventLoggingEnabled">
|
<summary>
|
Gets and sets the EventLoggingEnabled property
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.InstrumentationListener.PerformanceCountersEnabled">
|
<summary>
|
Gets and sets the PerformanceCountersEnabled property
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterInstallerBuilder">
|
<summary>
|
Add event log source definitions for classes that have been attributed
|
with HasInstallableResourceAttribute and EventLogDefinition attributes to EventLogInstallers.
|
One installer is created for each unique performance counter category that is found.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterInstallerBuilder.#ctor(System.Type[])">
|
<summary>
|
Initializes this object with a list of <see cref="T:System.Type"></see>s that may potentially be attributed appropriately.
|
</summary>
|
<param name="availableTypes">Array of types to inspect check for performance counter definitions needing installation</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterInstallerBuilder.CreateInstallers(System.Collections.Generic.ICollection{System.Type})">
|
<summary>
|
Creates <see cref="T:System.Diagnostics.PerformanceCounterInstaller"></see> instances for each separate performance counter definition needing installation.
|
</summary>
|
<param name="instrumentedTypes">Collection of <see cref="T:System.Type"></see>s that represent types defining
|
performance counter definitions to be installed.</param>
|
<returns>Collection of installers containing performance counter definitions to be installed.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterInstallerBuilder.GetCategoryHelp(Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCountersDefinitionAttribute,System.Reflection.Assembly)">
|
<summary>
|
Gets the category help for a performance counter.
|
</summary>
|
<param name="attribute">The performance counter attribute.</param>
|
<param name="originalAssembly">The assembly where the help is defined.</param>
|
<returns>The help for the performance counter.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterInstallerBuilder.GetCounterHelp(System.String,System.Reflection.Assembly)">
|
<summary>
|
Gets the counter help for a performance counter.
|
</summary>
|
<param name="resourceName">The resource name.</param>
|
<param name="originalAssembly">The assembly where the help is defined.</param>
|
<returns>The help for the performance counter.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterInstanceName">
|
<summary>
|
Constructs an instance name for a <see cref="T:System.Diagnostics.PerformanceCounter"></see> following embedded
|
formatting rules.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterInstanceName.#ctor(System.String,System.String)">
|
<overloads>
|
Initializes this object with information needed to construct a <see cref="T:System.Diagnostics.PerformanceCounter"></see>\
|
instance name.
|
</overloads>
|
<summary>
|
Initializes this object with information needed to construct a <see cref="T:System.Diagnostics.PerformanceCounter"></see>\
|
instance name.
|
</summary>
|
<param name="prefix">Counter name prefix.</param>
|
<param name="suffix">Counter name suffix.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterInstanceName.#ctor(System.String,System.String,System.Int32,System.Int32)">
|
<overloads>
|
Initializes this object with information needed to construct a <see cref="T:System.Diagnostics.PerformanceCounter"></see>\
|
instance name.
|
</overloads>
|
<summary>
|
Initializes this object with information needed to construct a <see cref="T:System.Diagnostics.PerformanceCounter"></see>\
|
instance name.
|
</summary>
|
<param name="prefix">Counter name prefix.</param>
|
<param name="suffix">Counter name suffix.</param>
|
<param name="maxPrefixLength">Max prefix length.</param>
|
<param name="maxSuffixLength">Max suffix length.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCounterInstanceName.ToString">
|
<summary>
|
Returns properly formatted counter name as a string.
|
</summary>
|
<returns>Formatted counter name.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCountersDefinitionAttribute">
|
<summary>
|
Defines information needed to install a <see cref="T:System.Diagnostics.PerformanceCounterCategory"></see>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCountersDefinitionAttribute.#ctor(System.String,System.String)">
|
<overloads>
|
Initializes this attribute with information needed to install this performance counter category.
|
</overloads>
|
<summary>
|
Initializes this attribute with information needed to install this performance counter category.
|
</summary>
|
<param name="categoryName">Performance counter category name</param>
|
<param name="categoryHelp">Counter category help resource name.
|
This is not the help text itself,
|
but is the resource name used to look up the internationalized help text at install-time.
|
</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCountersDefinitionAttribute.#ctor(System.String,System.String,System.Diagnostics.PerformanceCounterCategoryType)">
|
<summary>
|
Initializes this attribute with information needed to install this performance counter category.
|
</summary>
|
<param name="categoryName">Performance counter category name</param>
|
<param name="categoryHelp">Counter category help resource name.
|
This is not the help text itself,
|
but is the resource name used to look up the internationalized help text at install-time.
|
</param>
|
<param name="categoryType">Performance counter category type.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCountersDefinitionAttribute.CategoryType">
|
<summary>
|
Gets the <see cref="T:System.Diagnostics.PerformanceCounter"></see> category type.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCountersDefinitionAttribute.CategoryName">
|
<summary>
|
Gets the <see cref="T:System.Diagnostics.PerformanceCounter"></see> category name.
|
</summary>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.PerformanceCountersDefinitionAttribute.CategoryHelp">
|
<summary>
|
Gets the <see cref="T:System.Diagnostics.PerformanceCounter"></see> category help resource name.
|
This is not the help text itself,
|
but is the resource name used to look up the internationalized help text at install-time.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.ReflectionInstaller`1">
|
<summary>
|
Generic installer wrapper around installer builder. Used to find and install
|
given type of installable resource.
|
</summary>
|
<typeparam name="TInstallerBuilder">Specific type of installer builder to instantiate</typeparam>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.ReflectionInstaller`1.Install(System.Collections.IDictionary)">
|
<summary>
|
Installs the instrumentation resources
|
</summary>
|
<param name="stateSaver">An <see cref="T:System.Collections.IDictionary"/> used to save information needed to perform a commit, rollback, or uninstall operation.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Instrumentation.ReflectionInstaller`1.Uninstall(System.Collections.IDictionary)">
|
<summary>
|
Uninstalls the instrumentation resources
|
</summary>
|
<param name="stateSaver">An <see cref="T:System.Collections.IDictionary"/> that contains the state of the computer after the installation was complete.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.MethodInvocationFormatter">
|
<summary>
|
A formatter object that allows replacement tokens in a string.
|
The supported tokens are:
|
<list type="bullet">
|
<item><term>{appdomain}</term><description>Includes the current appdomain's friendly name.</description></item>
|
<item><term>{assembly}</term><description>Includes the assembly name.</description></item>
|
<item><term>{namespace}</term><description>Includes the target class's namespace.</description></item>
|
<item><term>{type}</term><description>Includes the name of the type containing the target method.</description></item>
|
<item><term>{method}</term><description>Includes the name of the target method.</description></item>
|
</list>
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter">
|
<summary>
|
This class provides an engine to process a string that contains
|
replacement tokens of the form "{token}" and replace them with
|
calculated value later.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter.#ctor">
|
<summary>
|
Create a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter.#ctor(Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken[])">
|
<summary>
|
Create a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter"/>.
|
</summary>
|
<param name="tokens">List of tokens to replace.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter.#ctor(System.Collections.Generic.IEnumerable{Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken})">
|
<summary>
|
Create a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter"/>.
|
</summary>
|
<param name="tokens">List of tokens to replace.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter.Add(Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken[])">
|
<summary>
|
Add a new set of replacement tokens.
|
</summary>
|
<param name="tokens">Tokens to add to the list.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter.AddRange(System.Collections.Generic.IEnumerable{Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken})">
|
<summary>
|
Add new tokens to the set of replacements.
|
</summary>
|
<param name="tokens">Tokens to add to the list.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter.Format(System.String)">
|
<summary>
|
Format the given template, replacing any tokens present.
|
</summary>
|
<param name="template">The string to format, containing the replacement tokens.</param>
|
<returns>The formatted string, with tokens replaced.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.MethodInvocationFormatter.#ctor(Microsoft.Practices.Unity.InterceptionExtension.IMethodInvocation)">
|
<summary>
|
Creates a <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.MethodInvocationFormatter"/> that replaces tokens
|
using the information in the given method invocation.
|
</summary>
|
<param name="input"><see cref="T:Microsoft.Practices.Unity.InterceptionExtension.IMethodInvocation"/> object containing information
|
about the current method call.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken">
|
<summary>
|
A single replacement token used by the <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementFormatter"/>. A
|
token consists of two things:
|
<list type="bullet">
|
<item><description>The actual text of the token (including the {})</description></item>
|
<item><description>A delegate to retrieve the value to replace the token.</description></item>
|
</list>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken.#ctor(System.String,Microsoft.Practices.EnterpriseLibrary.Common.ReplacementTextDelegate)">
|
<summary>
|
Create a new <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken"/>.
|
</summary>
|
<param name="token">The string marking where the token should be replaced.</param>
|
<param name="getReplacementText">Delegate to return the value that replaces the token.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken.ReplaceToken(System.Text.StringBuilder)">
|
<summary>
|
Replace this token in the given stringbuilder.
|
</summary>
|
<param name="sb"><see cref="T:System.Text.StringBuilder"/> holding the template to perform the token replacement on.</param>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken.Token">
|
<summary>
|
The token string.
|
</summary>
|
<value>The token string.</value>
|
</member>
|
<member name="P:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementToken.ReplacementText">
|
<summary>
|
The text to replace this token with.
|
</summary>
|
<value>Replacement text.</value>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.ReplacementTextDelegate">
|
<summary>
|
Delegate type giving a function that returns the replacement text for a token.
|
</summary>
|
<returns>The replacement text.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.ResourceStringLoader">
|
<summary>
|
Helper class to load resources strings.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ResourceStringLoader.LoadString(System.String,System.String)">
|
<summary>
|
Load a resource string.
|
</summary>
|
<param name="baseName">The base name of the resource.</param>
|
<param name="resourceName">The resource name.</param>
|
<returns>The string from the resource.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.ResourceStringLoader.LoadString(System.String,System.String,System.Reflection.Assembly)">
|
<summary>
|
Load a resource string.
|
</summary>
|
<param name="baseName">The base name of the resource.</param>
|
<param name="resourceName">The resource name.</param>
|
<param name="asm">The assembly to load the resource from.</param>
|
<returns>The string from the resource.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ConstantStringResolver">
|
<summary>
|
Resolves strings by returning a constant value.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.IStringResolver">
|
<summary>
|
Resolves string objects.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.IStringResolver.GetString">
|
<summary>
|
Returns a string represented by the receiver.
|
</summary>
|
<returns>The string object.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ConstantStringResolver.#ctor(System.String)">
|
<summary>
|
Initializes a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ConstantStringResolver"/> with a constant value.
|
</summary>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.DelegateStringResolver">
|
<summary>
|
Resolves strings by invoking a delegate and returning the resulting value.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.DelegateStringResolver.#ctor(System.Func{System.String})">
|
<summary>
|
Initializes a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ConstantStringResolver"/> with a delegate.
|
</summary>
|
<param name="resolverDelegate">The delegate to invoke when resolving a string.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.EnumerableExtensions">
|
<summary>
|
Some utility extensions on <see cref="T:System.Collections.Generic.IEnumerable`1"/> to suppliment
|
those available from Linq.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.EnumerableExtensions.ForEach``1(System.Collections.Generic.IEnumerable{``0},System.Action{``0})">
|
<summary>
|
Execute <paramref name="action"/> for each element of <paramref name="sequence"/>.
|
</summary>
|
<typeparam name="T">Type of items in <paramref name="sequence"/>.</typeparam>
|
<param name="sequence">Sequence of items to act on.</param>
|
<param name="action">Action to invoke for each item.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.EnumerableExtensions.Zip``3(System.Collections.Generic.IEnumerable{``0},System.Collections.Generic.IEnumerable{``1},System.Func{``0,``1,``2})">
|
<summary>
|
Given a sequence, combine it with another sequence, passing the corresponding
|
elements of each sequence to the <paramref name="zipper"/> action to create
|
a new single value from the two sequence elements. "Zip" here refers to a zipper,
|
not the compression algorithm. The resulting sequence will have the same number
|
of elements as the shorter of sequence1 and sequence2.
|
</summary>
|
<typeparam name="T1">Type of the elments in the first sequence.</typeparam>
|
<typeparam name="T2">Type of the elements in the second sequence.</typeparam>
|
<typeparam name="TResult">Type of the resulting sequence elements.</typeparam>
|
<param name="sequence1">The first sequence to combine.</param>
|
<param name="sequence2">The second sequence to combine.</param>
|
<param name="zipper">Func used to calculate the resulting values.</param>
|
<returns>The result sequence.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.EnumerableExtensions.Zip``2(System.Collections.Generic.IEnumerable{``0},System.Collections.Generic.IEnumerable{``1})">
|
<summary>
|
Take two sequences and return a new sequence of <see cref="T:System.Collections.Generic.KeyValuePair`2"/> objects.
|
</summary>
|
<typeparam name="T1">Type of objects in sequence1.</typeparam>
|
<typeparam name="T2">Type of objects in sequence2.</typeparam>
|
<param name="sequence1">First sequence.</param>
|
<param name="sequence2">Second sequence.</param>
|
<returns>The sequence of <see cref="T:System.Collections.Generic.KeyValuePair`2"/> objects.</returns>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.EnumerableExtensions.ToDictionary``2(System.Collections.Generic.IEnumerable{``0},System.Collections.Generic.IEnumerable{``1})">
|
<summary>
|
Take two sequences and return a <see cref="T:System.Collections.Generic.IDictionary`2"/> with the first sequence
|
holding the keys and the corresponding elements of the second sequence containing the values.
|
</summary>
|
<typeparam name="TKey">Type of keys in the dictionary.</typeparam>
|
<typeparam name="TValue">Type of values in the dictionary.</typeparam>
|
<param name="keys">Sequence of dictionary keys.</param>
|
<param name="values">Sequence of dictionary values.</param>
|
<returns>The constructed dictionary.</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ResourceStringResolver">
|
<summary>
|
Resolves strings by retrieving them from assembly resources, falling back to a specified
|
value.
|
</summary>
|
<remarks>
|
If both the resource type and the resource name are available, a resource lookup will be
|
performed; otherwise, the default value will be returned.
|
</remarks>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ResourceStringResolver.#ctor(System.Type,System.String,System.String)">
|
<summary>
|
Initializes a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ResourceStringResolver"/>
|
for a resource type, a resource name and a fallback value.
|
</summary>
|
<param name="resourceType">The type that identifies the resources file.</param>
|
<param name="resourceName">The name of the resource.</param>
|
<param name="fallbackValue">The fallback value, to use when any of the resource
|
identifiers is not available.</param>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ResourceStringResolver.#ctor(System.String,System.String,System.String)">
|
<summary>
|
Initializes a new instance of <see cref="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ResourceStringResolver"/>
|
for a resource type name, a resource name and a fallback value.
|
</summary>
|
<param name="resourceTypeName">The name of the type that identifies the resources file.</param>
|
<param name="resourceName">The name of the resource.</param>
|
<param name="fallbackValue">The fallback value, to use when any of the resource
|
identifiers is not available.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ServiceLocatorExtensions">
|
<summary>
|
Extension methods on <see cref="T:Microsoft.Practices.ServiceLocation.IServiceLocator"/> for convenience.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.ServiceLocatorExtensions.Dispose(Microsoft.Practices.ServiceLocation.IServiceLocator)">
|
<summary>
|
If the object implements <see cref="T:System.IDisposable"/> then call it.
|
</summary>
|
<param name="locator">The service locator to dispose, if possible.</param>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.TypeExtensions">
|
<summary>
|
Extensios to <see cref="T:System.Type"/>
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.TypeExtensions.FindGenericParent(System.Type,System.Type)">
|
<summary>
|
Locates the generic parent of the type
|
</summary>
|
<param name="rootType">Type to begin search from.</param>
|
<param name="parentType">Open generic type to seek</param>
|
<returns>The found parent that is a closed generic of the <paramref name="parentType"/> or null</returns>
|
</member>
|
<member name="T:Microsoft.Practices.EnterpriseLibrary.Common.Utility.WrappedAsyncOperation">
|
<summary>
|
A helper class that provides the code needed to wrap an existing
|
asynchronous operation and return a different implementation of
|
<see cref="T:System.IAsyncResult"/>.
|
</summary>
|
</member>
|
<member name="M:Microsoft.Practices.EnterpriseLibrary.Common.Utility.WrappedAsyncOperation.BeginAsyncOperation``1(System.AsyncCallback,System.Func{System.AsyncCallback,System.IAsyncResult},System.Func{System.IAsyncResult,``0})">
|
<summary>
|
Start an asyncronous operation that wraps a lower-level
|
async operation.
|
</summary>
|
<typeparam name="TWrappingAsyncResult">Type that implements IAsyncResult
|
that will be returned from this method.</typeparam>
|
<param name="callback">The user's callback method to be called when
|
the async operation completes.</param>
|
<param name="beginOperation">A delegate that invokes the underlying
|
async operation that we're wrapping.</param>
|
<param name="wrappingResultCreator">A delegate that takes the inner
|
async result and returns the wrapping instance of <typeparamref name="TWrappingAsyncResult"/>.
|
</param>
|
<returns>The <see cref="T:System.IAsyncResult"/>.</returns>
|
</member>
|
</members>
|
</doc>
|
